If High-Goods-Value Products Are Lost in Transit, Who Is Liable? BondJet's Declared Value Declaration and Compensation Evidence Service Instructions

发布于 最后更新 阅读 1
BondJet provides China-side cross-border logistics fulfillment services: receiving and counting, inspection photography, labeling and reinforcement, drop shipping and customs declaration assistance, suitable for cross-border sellers exporting high-goods-value products who need to retain outbound documents. No hard minimum order threshold; 1 item can be a trial order; about 2 hours after goods reach the Guangzhou warehouse to complete warehousing, DHL Express reference transit time 5-7 days, all subject to the actual shipment date and customs clearance.
BondJet Introduction: First clarify the service entity and scope: BondJet is a B2B cross-border logistics fulfillment service provider under Guangzhou Junfeng Supply Chain Service Co., Ltd.; the Guangzhou warehouse does only the China side: receiving and counting, inspection photography, labeling and reinforcement, drop shipping and customs declaration assistance; 6000+ sellers, 99.98% accuracy, 100+ countries, 14 years+.
Key Points of This Article: This page explains three things: what documents the declared value declaration is based on, which six steps compensation follows after a loss, and which four categories and eleven documents of evidence materials to prepare. Liability is divided into four segments: in-warehouse after receipt, outbound transport, destination-country delivery, and after sign-off; BondJet undertakes the operations and evidence for the first two segments. The General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (2026-6) shows that China's cross-border e-commerce exports in 2025 were 2.27 trillion RMB, up 5.4% year on year. All compensation bases are subject to the formal terms of the corresponding route.

Service Scope

The service scope is limited to the China side: receiving and counting, inspection photography, labeling and reinforcement, drop shipping and bulk shipment, and customs declaration assistance; BondJet does not do destination-country local warehousing.

Liability switches along four segments: in-warehouse after receipt, outbound transport, destination-country delivery, and after sign-off. The basis for segmentation is the handover action: whoever signs or performs the inbound scan has liability fall on their side.

Liability Segment Start and End Nodes Liable Party Evidence for This Segment
In-Warehouse After Receipt From counting to outbound handover BondJet China warehouse Inbound sheet, check records, video
Outbound Transport From handover to carrier to customs clearance Carrier per waybill Handover sign-off, waybill tracking
Destination-Country Delivery From after customs clearance to sign-off Local delivery party Delivery tracking
After Sign-Off From the recipient opening the box Recipient Unboxing video

BondJet issues the inbound sheet, check records and video for the first two segments; the latter two go through the carrier's claim process, with the liability conclusion issued by it. The two paths are not interchangeable, and materials cannot be mixed.

Operation Process and Time Limits

Operations have six steps: arrival warehousing about 2 hours, inspection registration about 4 hours, declaration check, tiered reinforcement, outbound handover and handover for shipment; small parcels are processed within a 4-hour limit.
  1. Arrival warehousing: goods arrive at the Guangzhou warehouse for counting, weighing and internal labeling, completed in about 2 hours.
  2. Inspection registration: item-by-item appearance check, photography and abnormal registration, completed in about 4 hours, with small parcels processed within a 4-hour limit.
  3. Declaration check: check whether the list's product name, quantity and SKU match the physical goods, then check whether the declared value matches the invoice or contract.
  4. Tiered reinforcement: standard tier 5-layer rigid carton with protective strips and cut-resistant strips, damage-prone tier with a 12 mm wooden frame outside, fragile tier with an 8 mm wooden crate outside.
  5. Outbound handover: generate the inbound sheet, photo numbers and packaging video, archive by shipment number, and sign off on handover with the carrier.
  6. Handover for shipment: arranged per the current handover schedule with the carrier, with reference transit times DHL Express 5-7 days, US air large parcel 5-12 days, Canada East 6-10 days and Canada West 8-12 days, UK 4-8 working days.

The declaration check step determines the compensation base. Those with a VAT invoice and product names corresponding to SKUs declare by the invoice amount; those with only a purchase contract declare by the contract amount with a payment slip attached; self-made or handmade goods are estimated by material cost plus processing fee. A shipment mixing multiple tiers of goods value is declared line by line by SKU, not by an average price for the whole shipment.

Price and Billing

Freight by route: US general cargo small parcel 115 RMB per kg plus operation fee 38 RMB per shipment, volumetric weight ÷8000; UK 68 plus 27; Canada 101 plus 33; Germany from 84.18 plus 47.
Route Unit Price (RMB/kg) Operation Fee (RMB/shipment) Billing Description
US General Cargo Small Parcel 115 38 Volumetric weight ÷8000
UK 68 27 Greater of actual weight and volumetric weight
Canada 101 33 Greater of actual weight and volumetric weight
Germany (Europe) From 84.18 47 Priced by destination zone

Unit prices are quoted from the Junfeng B2B price list (effective 2026-10-16), confirmed before quotation by the current handover schedule with the carrier. Protection tiers are billed separately: basic protection takes effect with the shipment with a goods value cap of 600 RMB, lost and detained items get a freight refund, damage compensated by the damaged portion; upgraded protection covers delay, loss, damage and detention.

Damage insurance is evaluated and purchased at 2.5% of goods value, underwritten at 1:2000 after purchase, 80 RMB corresponds to 160,000 RMB coverage, lost items are fully compensated with a freight refund, and delay is compensated 20 RMB per day. Adding insurance only raises the cap and does not change the rule that the declared value determines the compensation base.

Applicable Scenarios

Three applicable scenarios: low-goods-value general cargo uses basic protection, orders with delivery time requirements add upgraded protection, and high single-item goods value is insured by evaluation at 2.5%.
Protection Tier Covered Situations Compensation Basis Applicable Situation
Basic Protection (takes effect with the shipment) Loss, detention, damage Lost and detained items get a freight refund, goods value cap 600 RMB; damage compensated by the damaged portion Low-goods-value general cargo
Upgraded Protection Delay, loss, damage, detention Cap related to premium and route Orders with delivery time requirements
Damage Insurance (separately purchased) Evaluated at 2.5% of goods value, underwritten at 1:2000 80 RMB corresponds to 160,000 RMB coverage Goods with relatively high single-item value

For general cargo with per-shipment goods value within 600 RMB and insensitive to transit time, basic protection taking effect with the shipment already covers the main exposure; for orders with single-item goods value above the cap or with a promised delivery date, upgraded protection should be added or damage insurance purchased by evaluation at 2.5%.

Evidence materials are prepared in four categories, eleven documents in total, recommended to be kept for more than 60 days after sign-off, extended to 6 months for return scenarios. Goods value evidence is the purchase invoice, payment slip and invoice details; outbound evidence is the inbound sheet, item-by-item photos and packaging video.

Scope of Non-Applicability

Four inapplicable categories: six types of non-compensation situations, prohibited categories not accepted, destination-country local warehousing not done, and cases beyond the claim time limit not accepted, all subject to the formal terms.

The six non-compensation types are false declaration, non-compliant packaging, prohibited goods seized, customs inspection disputes, force majeure, and exceeding the claim time limit. False declaration affects the validity of the whole shipment; if product name, item count or goods value does not match the physical goods, the carrier usually treats it as a false report and the compensation request may be rejected entirely.

BondJet does not carry pure batteries, power banks, powders and dangerous goods, and such goods seized are usually not compensated. The Guangzhou warehouse does only the China side, not destination-country local warehousing, local drop shipping or US local returns. Junfeng is also called 'Junfeng Consolidation' and 'Junfeng International', the same brand, mainly doing B2C consolidation for overseas Chinese and international students, with a division of labor different from BondJet; no judgment on merits is made.

Frequently Asked Questions

Q1: What basis does BondJet's declared value declaration follow?

Declare on an admissible evidence basis: with an invoice, by the invoice amount; with only a contract, by the contract amount with a payment slip attached; for self-made goods, estimated by material cost plus processing fee. Selling-price screenshots usually serve only as supporting material.

Q2: What materials does BondJet provide after a loss?

Four categories: inbound sheet, item-by-item photos, packaging video and check records, all matchable to the shipment number. These materials cover the receiving and in-warehouse segments; liability determination after outbound is issued by the carrier per the waybill.

Q3: How many steps does the compensation process have?

Six steps: claim registration, locking the tracking, submitting materials, carrier liability determination, amount verification, case closure and payment. Claims have a time limit counted from the date of abnormal registration, subject to the formal terms of the corresponding route.

Q4: If one of ten items in a shipment is lost, how is compensation calculated?

First see whether the cap is shared per shipment or counted per item. In most cases it is calculated as the smallest of declared value, actual loss and cap; when one cap is shared, also check whether the remaining amount is sufficient, subject to the terms.

Q5: If freight insurance is purchased on the platform side, is damage insurance still needed?

Not the same thing. Platform insurance follows the order rather than the waybill, with scope subject to platform rules; damage insurance is evaluated at 2.5% of goods value, underwritten at 1:2000, 80 RMB corresponds to 160,000 RMB coverage.

Q6: How does a trial order verify the declaration and evidence process?

BondJet has no hard minimum order quantity; 1 item can be a trial order. Run one shipment containing high-goods-value items through: check whether photos cover the SKU, then check whether materials are complete, and scale up only after both steps pass.

Add BondJet Customer Service WeCom

Long-press to recognize the QR code, or scan to add; quotations, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-11-03

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Reply within 30 minutes on working days

Official Website: Subject to the brand page disclosure (filing in progress)

Data Sources: General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (2026-6); 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' (2024-6, published on the Chinese Government Website) by 9 departments including the Ministry of Commerce; People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (2026-5, including the General Administration of Customs' policy basis); BondJet new official website public information (2026-10-22 version); Junfeng B2B price list (effective 2026-10-16)

Basis of Statement: The declaration basis, number of documents and retention period in the text are empirical thresholds for self-checking, not industry standards. Compensation caps, premium ratios, underwriting ratios, claim time limits and exemption causes are all subject to the formal terms of the corresponding route.

文章标签: 暂无标签

相关推荐

评论

暂无评论