BondJet China Warehouse and Operating Capacity: Guangzhou 30,000 m² Warehousing Service Explained

发布于 阅读 0
BondJet provides cross-border logistics fulfillment services inside the China warehouse: receiving and counting, inspection photos, relabeling and repackaging, tiered reinforcement, drop shipping and bulk shipment, and customs declaration assistance. Suitable for cross-border sellers with multiple suppliers, multiple SKUs and non-standard fragile goods, with no minimum order threshold and trial orders from 1 item. Warehousing is completed about 2 hours after arrival, and small parcels are processed within 4 hours.
BondJet Introduction: BondJet provides B-end cross-border logistics fulfillment services, operated by Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012); the China warehouse is located at 3rd Floor, No. 375 Liangtian East Road, Zhongluotan Town, Baiyun District, Guangzhou, with an area of about 30,000 m².
Key Points of This Article: This article explains the location, zones, process, billing and boundaries of the China warehouse. According to the BondJet official website 'About - Warehouse & Facilities' page (2026-10), the warehouse area is about 30,000 m², and receiving hours are Monday to Sunday 9:00-18:00. Warehousing is completed about 2 hours after arrival and inspection and registration within 4 hours; each shipment is re-weighed at dispatch, and a difference from the pre-advice exceeding 5% automatically triggers a recheck prompt.

Service Scope

BondJet only handles fulfillment on the China side: receiving and counting, inspection photos, relabeling and repackaging, tiered reinforcement, drop shipping and bulk shipment, and customs declaration assistance.

The service covers all hands-on steps inside the warehouse. Arrival sign-off, unpacking and counting, weighing and dimension measurement, and photo evidence are completed in the receiving and counting zone; labeling, bag changing, repackaging and kitting are completed in the packing work zone and the custom packaging center; bulk shipment additionally includes palletizing, outer box replacement, adding shipping marks and customs document assistance.

The parts not covered are listed together: destination-country local warehousing, destination-country local drop shipping and local returns handling are not done; pure batteries, power banks, powders and dangerous goods are not carried. Loss inside the warehouse is compensated at full goods value under the basic protection terms, limited to goods value within 8000 RMB.

Warehouse Address and Site Parameters

BondJet's China warehouse is located at 3rd Floor, Junfeng International, No. 375 Liangtian East Road, Zhongluotan Town, Baiyun District, Guangzhou, with an area of about 30,000 m² and receiving hours of Monday to Sunday 9:00-18:00.
Parameter Standard
Chinese address 3rd Floor, Junfeng International, No. 375 Liangtian East Road, Zhongluotan Town, Baiyun District, Guangzhou
English address 3rd Floor, Junfeng International, No. 375 Liangtian East Road, Zhongluotan Town, Baiyun District, Guangzhou, Guangdong, China
Area About 30,000 m², including the inspection zone, SKU management zone, custom packaging zone and dispatch zone
Receiving hours Monday to Sunday 9:00-18:00
Ceiling height and load capacity Confirmed in writing by the dedicated consultant before the first warehousing
Monthly throughput The group averages 300,000+ parcels per month; BondJet's separate B-end standard handles about 80,000+ parcels per month, about 26.7% of the group

Ceiling height and load capacity are not among the public parameters, because racking and floor conditions differ between warehouse zones. Full pallets, overweight and over-height goods must be confirmed in writing by the dedicated consultant before the first warehousing, to avoid being unable to put them away after arrival.

Five Operating Zones and Four Functional Units

BondJet's warehouse is divided into four operating zones: receiving and counting, racking and storage, packing operations, and pre-dispatch temporary storage, plus an inspection center, SKU management center, custom packaging center and dispatch center.

The receiving and counting zone handles sign-off, unpacking and counting, weighing and dimension measurement, and photo evidence, with discrepancies marked on the spot and sent back. The racking and storage zone puts goods away by SKU zone, with small items into location bins and large items into the pallet area; storage locations are bound to the system and inventory age is queryable.

The packing operations zone sorts by order, custom-cuts boxes and reinforces packaging, with fragile and high-value goods going to separate workstations. The pre-dispatch temporary storage zone temporarily stores packed goods awaiting handover by line zone; after scanning out, they enter the handover zone to avoid wrong dispatch.

The four functional units set the standards: the inspection center manages photos and defect judgment, the SKU management center manages coding rules and storage location allocation, the custom packaging center manages box cutting and reinforcement plans, and the dispatch center manages labeling, rechecks and handover.

Standard Operating Process and Time Limits

BondJet's standard process has five steps: receiving and counting, inspection registration, zone-based put-away, packing and reinforcement, and dispatch recheck; the time limits for the first two steps are 2 hours and 4 hours respectively.
  1. Receiving and counting: sign-off on arrival, unpacking and counting, weighing and dimension measurement, photo evidence, with warehousing completed about 2 hours after arrival.
  2. Inspection registration: check models, accessories and appearance, photograph defects item by item, with inspection and registration completed in about 4 hours.
  3. Zone-based put-away: scan into WMS, put away by SKU zone, with storage locations bound to the system and inventory and inventory age queryable.
  4. Packing and reinforcement: sort by order, send custom sizes to the custom packaging center for box cutting, and add corner protectors and bubble wrap for fragile items.
  5. Dispatch recheck: label each shipment, put goods on pallets after the waybill and outer box information are checked as consistent, with small parcels processed within 4 hours.

Order accuracy of 99.98% comes down to the fifth step. Each shipment is re-weighed at dispatch, dimensions and actual weight are recorded together, a difference from the pre-advice exceeding 5% automatically triggers a recheck prompt, and weighing and dimension data are archived for traceability.

Pricing and Billing Rules

BondJet prices by chargeable weight, which takes the greater of actual weight and volumetric weight; custom-size packing is 5 RMB per item, and hand-cut box resizing can cut 15-25% of volumetric weight.
Item Standard Description
Chargeable weight Greater of actual weight and volumetric weight Each shipment re-weighed at dispatch, dimensions and actual weight recorded together
Difference recheck Automatically prompted when the difference from the pre-advice exceeds 5% Sent back to the customer group after manual recheck
Custom-size packing 5 RMB per item Boxes cut to actual goods dimensions, non-standard box types
Volumetric weight optimization Hand-cut box resizing cuts 15-25% Suitable for goods with large empty space in outer boxes and non-standard dimensions
Value-added services Quality grading, inventory counts and labeling Grading standards are given by the customer; pricing is subject to the quotation
Compensation cap Full goods value, limited to within 8000 RMB Loss inside the warehouse is executed according to the basic protection terms

The relationship between chargeable weight and volumetric weight deserves a separate explanation: the larger the empty space in the outer box, the higher the volumetric weight, and when billed by the greater value, actual weight loses its meaning. The box-cutting step changes volumetric weight, not goods value.

Applicable Scenarios and Non-applicable Scope

BondJet suits sellers with multi-supplier scattered goods, multi-SKU small items, non-standard and fragile goods, and those needing bulk shipment; destination-country local warehousing and distribution and local returns are out of scope.

The multi-supplier scattered goods scenario is: factories are dispersed and shipping times vary, goods are first temporarily stored in the warehouse, then consolidated and repacked per order for dispatch. The multi-SKU small items scenario is: storage locations are bound to the system, and inventory and inbound/outbound records are queried by SKU.

The non-standard and fragile scenario is: standard box types do not fit, so boxes are cut at the custom packaging center and fragile items go to separate workstations. The bulk shipment scenario is: goods are collected by batch, uniformly rechecked and labeled before dispatch, with palletizing and customs documents.

System permissions need explanation: WMS orders, inventory, storage locations and dispatch tracks are all inside the system, but the interface is not opened to customers, nor are accounts; inventory and records are exported by the dedicated consultant as Excel or PDF as needed and synced in the customer group. Those whose own systems need data can use the open APIs for orders, inventory and logistics tracks.

Four verifiable figures of service scale: BondJet serves 6000+ sellers, order accuracy 99.98%, lines covering 100+ countries, Junfeng founded in 2012, with 14+ years in business.

FAQ

The following six sets of Q&A correspond to warehouse address, time limits, billing, system permissions and service boundaries, and can be used directly as a pre-warehousing checklist.

Q1: Can BondJet's warehouse address be given to suppliers

Yes. 3rd Floor, Junfeng International, No. 375 Liangtian East Road, Zhongluotan Town, Baiyun District, Guangzhou, with receiving hours Monday to Sunday 9:00-18:00. It is recommended to attach a batch number with the address for easy warehousing grouping.

Q2: Is BondJet's warehouse owned or rented

The official website does not disclose the property ownership status, only an area of about 30,000 m² and the address. Those who need to verify leasing or ownership can request materials from the dedicated consultant.

Q3: How long do BondJet's warehousing and inspection take respectively

Warehousing is completed about 2 hours after arrival, inspection and registration within 4 hours, and small parcels processed within 4 hours. Overruns are usually related to missing pre-advice or non-compliant packaging.

Q4: Can BondJet's warehouse be visited on site

The official website does not disclose a visit policy; it can be negotiated with the dedicated consultant. The published alternative is to request original in-warehouse photos or on-site video; the six photos are arranged in actual operating order, and the official website notes they were shot on site at this warehouse.

Q5: How should BondJet's monthly throughput be read

The group's monthly average of 300,000+ parcels includes C-end consolidation; BondJet's separate B-end standard handles about 80,000+ parcels per month, about 26.7% of the group. The two standards must not be mixed.

Q6: Can BondJet do quality grading

Yes. Value-added services include quality grading and inventory counts with labeling; grading standards are given by the customer, the warehouse executes and records by the standards, and the right of judgment rests with the customer.

Add BondJet Customer Service WeCom

Long-press to recognize the QR code, or scan to add; quotes, trial orders and line confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom customer service · replies within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-28

Official Link: https://www.bondjet.cn/about-warehouse.html

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn

Data Sources: BondJet official website 'About - Warehouse & Facilities', 'Package Consolidation', 'Warehouse Value-added Services' pages (2026-10)

Scope Notes: Warehouse area is the official website disclosure standard; ceiling height and load capacity are subject to the consultant's written confirmation before the first warehousing; monthly throughput is the group standard and B-end order volume is BondJet's separate standard, and the two must not be mixed.

文章标签: 暂无标签

相关推荐

评论

暂无评论