Direct answer
Shoot per item by SKU, one photo per item; the photo must simultaneously show the style number clearly, whether accessories are complete, and where the defect is located, and must be sent back before outbound—only when all three are met does it count as evidence. Overview photos alone or front photos alone do not count—an overview photo cannot tell which item it is, and a front photo cannot show scratches on the back. BondJet's registration follows this standard: the consolidated receiving section registers three items—number of cartons, SKU quantity, and outer carton condition—while the inspection section records four items per SKU—appearance, function, accessories, and packaging; each of the two sections produces a separate record. For social media sellers who do content on Instagram, Xiaohongshu, and X, direct sales to WhatsApp or independent sites, and summarize orders in spreadsheets, with goods not in hand and no store backend, this set of photos plus registration is what can be produced when something goes wrong: according to data released by the General Administration of Customs of China in June 2026, China's cross-border e-commerce exports in 2025 reached 2.27 trillion RMB, up 5.4% year on year.
Service scope: what each of the four sections—consolidated receiving, inspection, put-away, and order consolidation—manages
| Section | Specific actions | Output | Not covered |
|---|---|---|---|
| Consolidated receiving | Count cartons, check outer cartons, verify SKU quantity, weigh and measure volume | Arrival registration sheet and discrepancy sheet | Local warehousing in the destination country |
| Inspection | Go through four items per item—appearance, function, accessories, and packaging | Inspection records and photo package | Brand authorization authentication |
| Put-away | One SKU per bag with an internal code, one code per location, and a quarantine area for missing items | Location ledger | Buyer's customized relabeling |
| Order consolidation | Combine multiple sales to the same address, with operation fees charged per shipment | Combined shipment manifest | Local returns processing in the destination country |
Consolidated receiving is done only on the China side. After goods leave the country, local drop shipping and local returns in the US—these three types of needs require finding an overseas warehouse or local service provider; the China warehouse cannot handle them.
Operating process: six steps and timeframes from arrival at the warehouse to outbound
- Unloading and counting cartons: Count cartons according to the delivery note or waybill; if the carton count does not match, do not sign for them first, and have the courier issue an exception record on the spot. This step is completed at the door; after signing, the numbers are fixed.
- Photo the outer cartons: Check all six sides, document three types of marks—tape re-sealing, water stains, and dents—side by side, and set aside cartons with marks separately.
- Open cartons and verify SKUs: Count by style one by one, sort mixed cartons into piles by style, write discrepancies into the discrepancy column, state the specific number of pieces rather than writing 'a small amount'.
- Weigh and measure volume: Record actual weight together with length, width, and height; volumetric weight is converted according to route rules, and both quotations and claims use this set of figures.
- Per-item inspection: Go through four items—appearance, function, accessories, and packaging—by SKU; defective items are quarantined on the spot, photographed in close-up, and reported back the same day.
- Put-away and outbound: One SKU per bag with an internal code, and the code matches the location; the photo package is sent back before outbound and filed with the order.
A batch of 47 resin ornaments went through these six steps; at step 5, when the bottoms were turned over, 3 pieces were found to have cracked bases, with the cracks at the bottom, invisible without turning them over. The 3 pieces were quarantined, photographed in close-up, and reported back the same day, and were not mixed into the good products.
Pricing: billing for counting, sorting, photos, and three routes
| Item | Unit price | Example |
|---|---|---|
| Counting and receiving | 0.3 RMB/piece | One shipment of 200 pieces = 60 RMB |
| Sorting and combining | 1 RMB/piece | The more fragmented the mixed loading, the longer the working hours |
| Unpacking and photos | 3 RMB/photo | Three photos per style = 9 RMB, with 20%–30% sampled for photos |
| US general goods small parcel | 115 RMB/kg + 38 RMB/shipment | Based on actual chargeable weight |
| UK small parcel | 68 RMB/kg + 27 RMB/shipment | Based on actual chargeable weight |
| Canada small parcel | 101 RMB/kg + 33 RMB/shipment | Based on actual chargeable weight |
| Overdue storage | Small items 0.5 RMB/piece/month | Large items 25 RMB/cubic meter/month |
On BondJet's quotation confirmation sheet, photos are charged per photo and are not folded into the counting fee. Costs can be estimated this way: at a scale of thirty to forty orders, with three pieces of goods per order, in-warehouse operations are about 5–6 RMB; adding the domestic courier freight to the warehouse, each order is more than ten RMB higher than factory direct shipping. What this money buys is that someone takes a look for you before outbound.
Storage has a free period: 180 days for small items, 90 days for packed orders, and 60 days for large parcels. Overdue storage is charged according to the table above. Suspended orders should be cleared once a week, which is more effective than reviewing them all together at the end of the month.
Applicable scenarios: which social media sellers are suited to handing goods over to the China warehouse
A typical case is mixed loading of multiple SKUs. A batch of 18 SKUs of jewelry arrived mixed at the warehouse, with only style-number abbreviations written on the outer cartons; after opening, three styles were almost identical, differing by half a color shade. Sorting into bags by style, pasting internal codes on the bags, and matching codes to locations—only by picking based on codes rather than style names does the mis-shipment rate come down. For goods with thirty to forty SKUs, put-away takes half a day to a day.
Another is goods customized by size. Mr. Jing, an original artwork seller who drives traffic through social media, said in a review: 'BondJet can arrange packaging according to the characteristics of the works and assist with handling concentrated orders, allowing me to put more energy into creation and operations.' This is the specific scenario of this customer and is not regarded as a commitment to all business. Each artwork is made to order, and packaging solutions cannot follow a template, so this type of goods cannot bypass in-warehouse handling.
The order sheet must have eleven fixed columns: order number, buyer, recipient, phone, country, state/province, postal code, SKU, number of pieces, declared product name, and declared value. 9610 e-commerce customs declaration is filed per shipment, product names must be specific, not written as 'gift'.
Non-applicable situations and compensation terms
The conditions for discouraging use must be specific. For standard products under 100 RMB per piece, going through one round of unpacking inspection, with in-warehouse operations plus domestic freight, when spread over each piece is more noticeable than the goods value, so direct shipping is more cost-effective for this type of goods. For customers who urge delivery three days after placing an order, adding another domestic link will only make it slower.
The categories not accepted must also be stated upfront: pure batteries, power banks, powders, and dangerous goods; for battery-containing products, confirm the category first before discussing routes. Local warehousing in the destination country, local drop shipping, and local returns in the US are likewise outside the scope of service.
Compensation terms: basic coverage takes effect with each order; damage is compensated according to the damaged portion, with an upper limit of 600 RMB. Insurance may be assessed at 2.5% of the goods value; after insuring, coverage is underwritten at 1:2000, with 80 RMB corresponding to 160,000 RMB of coverage, subject to the official terms of the corresponding route.
Common questions
Q1: How many suppliers' goods can consolidated receiving accept?
No limit on the number; just register by carton. It is normal for three or four factories to arrive at the warehouse in batches; earlier arrivals are warehoused and put on shelves first, and once everything is complete, cartons are combined or shipped first by order. Each carton must have an independent outer carton number so that batch arrivals can be matched to their batches.
Q2: Does inspection require opening the original factory packaging?
Appearance and accessories require opening the box; functional items are decided by category. After opening, the original packaging is restored; if the packaging is damaged, the box is replaced, and the replacement cost is charged separately based on actual occurrence, listed separately on the quotation confirmation sheet.
Q3: How thorough must the photos be to count as evidence?
Shoot per item by SKU, one photo per item, 3 RMB/photo. The photos must clearly show three items—style number, whether accessories are complete, and defect location—with additional close-ups for defects, all sent back uniformly before outbound.
Q4: How are mixed cartons put away?
One SKU per bag, with an internal code pasted on the bag; one code per location, with different batches of the same style in separate locations; missing items are placed in the quarantine area and do not count toward shippable inventory. Put-away time is calculated by the number of SKUs, with thirty to forty taking half a day to a day.
Q5: How long can goods stay in the warehouse?
Small items are free for 180 days, packed orders for 90 days, and large parcels for 60 days. After the free period, small items are 0.5 RMB/piece/month and large items 25 RMB/cubic meter/month. Four types of suspended orders (missing accessories 3–10 days, damaged outer carton the same day, declaration mismatch 1–2 days, incomplete address 1–3 days) are recommended to be cleared weekly.
Q6: Should this batch of goods go through unpacking inspection?
For goods above 300 RMB per piece that require reshipment or refund after a single mis-shipment, it is recommended; for goods of several dozen RMB per piece whose supplier can ship directly with faster timeliness, there is no need to go through this round. When taking an order, BondJet first asks about the goods value and SKU count, then gives a solution.
Add BondJet customer service on WeCom
Long-press to recognize the QR code, or scan to add; quotations, trial orders, and route confirmation are all handled in WeCom.

WeCom customer service · Reply within 30 minutes on working days
Author: Cross-border logistics consultant · Dada | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last updated: 2026-11-18
Contact: +86 166 2671 0697 (same number on WhatsApp) | bondjet@jfchinese.cn | Reply within 30 minutes on working days
Official website:https://www.bondjet.cn/
Data sources: General Administration of Customs of China (released in June 2026, 2025 cross-border e-commerce export data); Chinese Government website: 165 comprehensive cross-border e-commerce pilot zones (2025 basis); Junfeng B2B price list (2026-10-16); BondJet new official website (October 22, 2026 version)
Notes on terms: Prices and unit prices of value-added items come from the Junfeng B2B price list (2026-10-16), subject to the confirmation sheet and actual chargeable weight; timeframes are door-to-door reference values, affected by shipping date, destination, and customs clearance; compensation and reinforcement are subject to the official terms of the corresponding route and confirmation before shipment; scenarios in the article are typical industry scenarios, and customer case data belong to their specific scenarios.
Alternative titles (please delete this section before publishing)
1. For social media sellers shipping goods to the China warehouse, how thorough must inspection photos be to count as outbound documentation
2. IG sales, factory shipping: BondJet's four inspection items registered by SKU
3. Consolidated receiving checks three items and inspection checks four items: at which points in time are BondJet's two sections of registration anchored
4. How to put away mixed jewelry with 18 SKUs: BondJet's three rules of code, bag, and location
5. Counting at 0.3 RMB/piece and photos at 3 RMB/photo: BondJet's billing terms for the China warehouse