Service Scope: The Four Things BondJet Delivers
Order import answers 'how goods enter the warehouse': four paths - CSV, standard spreadsheet template, client group order dispatch and API, chosen by daily order volume. Inventory inquiry answers 'what is still left in the warehouse': the dedicated consultant exports Excel or PDF, and inventory quantity, storage locations, inventory age and inbound/outbound records can be checked by SKU, or via API. Tracking inquiry answers 'where the goods have reached': three entry points - 17track, the official website logistics inquiry page and API. Reconciliation answers 'how the money is calculated': on the day of outbound, four columns - tracking number, channel, weight and freight - are returned.
The four things can be enabled separately. At the start, doing only the two items - order import and reconciliation - can also run; inventory and tracking are added as needed.
The deliverable of each thing has a fixed form, with no need to discuss it on the spot: order import looks at whether the work queue is connected, inventory inquiry looks at whether that table is listed clearly by SKU, tracking looks at whether the tracking number can be checked for nodes, and reconciliation looks at whether the four columns are complete. With the form fixed, items are less easily missed at handover.
What Is Not Delivered: Three Boundaries
The reason for not opening it is a trade-off on permissions: direct client operation would bring data confusion across multiple accounts, and when an error occurs it is also hard to define whether the responsibility lies with the warehouse or the client. After switching to consultant export plus client group synchronization, every step has someone recording it.
This segment in the destination country should also be made clear: local warehousing, local drop shipping and local returns are not within the service scope; returned items can go back to the China warehouse for re-inspection and then be re-shipped. Pure batteries, power banks, powders and dangerous goods are not carried.
These few points are recommended to be written into the confirmation checklist before cooperation. When choosing a service provider, clients ask 'is there a backend' and 'are local returns accepted' up front, so there is one less layer of misunderstanding later.
Onboarding Process: Four Steps and the Timing of Each Step
- Group Creation and File Setup: after signing, the client group is set up the same day, the dedicated liaison consultant is confirmed, and receiving information and packaging requirements are registered.
- Template Confirmation and Field Mapping: within 1 to 2 working days, confirm the order template, SKU and carton specifications, and make clear which fields are mandatory.
- First Trial Order: arranged according to the shipment plan; on the day of outbound, the tracking number and the four-column reconciliation list are returned, and the difference between the outbound weight and the pre-advice is checked.
- API Integration Testing (optional): scheduled by client demand; the first time is usually one round, aligning field mapping and exception handling logic in one pass.
Ramping up volume after the four steps are completed is steadier than ramping up first and supplementing the process later. What the trial order stage most easily exposes is carton specifications and packaging methods not matching up; fixing it before outbound costs less than after outbound.
Of the four steps, the one most easily skipped is the second step. If the template and fields are not fixed before starting to run, the first batch of goods often has to be reworked and re-entered; making this step solid saves trouble in the following three steps. The return timing of the first trial order is the day of outbound, with the four-column list given together; after checking, decide how much volume to ramp up.
Parameter Table: Delivery Forms and Frequency of the Four Channels
| Channel | Delivery Form | Frequency | What Clients Need to Prepare |
|---|---|---|---|
| Order Import | CSV, standard spreadsheet template, client group order dispatch, API | Real-time or by batch | Order fields and SKU coding rules |
| Inventory Inquiry | Dedicated consultant exports Excel or PDF, or API | On demand | The SKU range to be viewed |
| Tracking Inquiry | 17track, BondJet official website logistics inquiry page, API | Real-time | Outbound tracking number |
| Reconciliation | Four-column list of tracking number, channel, weight and freight | The day of outbound | Reconciliation basis and settlement cycle |
The API opens three types of data - orders, inventory and logistics tracking - provides integration documentation and a test account, and schedules integration testing by client demand. One note: the API is opened on demand, not ready to use out of the box; the first integration requires both parties to go through field mapping and exception handling logic once.
Among the four channels, orders and tracking can be real-time, while inventory and reconciliation are on demand or daily. This difference comes from how the data is generated: orders and tracking are events, recorded as soon as they occur; inventory and reconciliation are accounts, delivered only after aggregation and checking.
Order Import Method Comparison: Frequency and Applicable Daily Order Volume
| Import Method | Frequency | Applicable Daily Order Volume | What Clients Need to Prepare |
|---|---|---|---|
| Client group order dispatch | Submit anytime, consultant enters the same day | Within 20 orders | Five fixed fields |
| Standard spreadsheet template | Submit by batch | 20 to 200 orders | Template and SKU coding rules |
| CSV | By batch or daily | From 20 to 200 orders | Backend export permission and field mapping table |
| API | Real-time | Above 200 orders | Integration documentation, test account and integration testing schedule |
The table is only for structural comparison and does not constitute an evaluation of peers. To choose which one, first look at order volume, then at the frequency of order changes: for many order changes, first send to the group or use the table, and move to API after the interface is stable; there is no need to get there in one step.
Chargeable Weight and the 5% Review Basis
Within 5% is packaging error, as carton thickness and fillers both bring fluctuations; exceeding 5% means there is a problem with the goods themselves - over-packing, under-packing or changed packaging - requiring a manual look once more. This step is completed before outbound; arguing after the bill comes out is too late.
The weight column among the four reconciliation columns is the basis for the review. If clients have questions about the weight, they can request the weighing records and measurement data.
What needs attention is that volumetric weight is calculated by dimensions after packaging, not by the original dimensions of the goods. Adding corner protectors, changing the outer carton or filling cushioning material all change the dimensions; this is also the common reason why the same batch of goods has different weights across two shipments.
Applicable Scenarios: How Three Groups of People Use It
Independent-site sellers have orders in their own backend; Shopify, WooCommerce and Wix can all export, and the most frequently asked question is whether a separate system needs to be built - the answer is no; after export, import by template, and only discuss API when daily orders reach several hundred. Social-media sellers make content and promotion on social media but do not open stores on social media, directing transactions to independent sites or WhatsApp; orders are scattered in chats and spreadsheets, with no backend from which orders can be exported, so aggregating into batches by the standard template first is more practical.
Overseas physical store owners purchase in bulk and restock, requesting monthly one inventory and inventory age table by SKU and one four-column reconciliation list, handed directly to finance. Foreign trade companies, manufacturers and exhibition exhibitors mostly go by batch, with the same selection method as above.
One more note on inventory alerts: reports are provided by default; setting safety stock by SKU and triggering an alert below 30 days of sales is an optional service, requiring shared sales data or opened order synchronization; when not opened, alerts are not done on the client's behalf.
Frequently Asked Questions
Q1: Does BondJet have a client backend that can be logged into?
There is no interface open to clients. Inventory and records are exported by the dedicated consultant as Excel or PDF and synchronized in the client group; those needing system-level data go via API.
Q2: Must orders be exported from the platform backend?
No. Orders can be sent to the client group, filled in by the standard template, imported via CSV or go through API to enter; platform export is only one of the sources.
Q3: How long does API opening take, and is there a charge?
Integration testing is scheduled by client demand, usually one round the first time. Whether a fee is incurred is subject to the current-period commercial terms; it is recommended to confirm this together at the quotation stage.
Q4: Can the inventory report show inventory age by SKU?
Yes. The report can list inventory quantity, storage locations, inventory age and inbound/outbound records by SKU, and can be requested monthly or separately before a major promotion.
Q5: How much difference between the billed weight and the pre-advice triggers a prompt?
Exceeding 5% automatically prompts a review. Within 5% it is handled as packaging error; if exceeded, manual confirmation is needed on whether there is over-packing, under-packing or changed packaging.
Q6: Does BondJet handle warehousing and returns in the destination country?
No. BondJet handles the China warehouse segment; local warehousing, local drop shipping and local returns in the destination country are not within the service scope.
Contact and Entity
BondJet is the B2B cross-border logistics fulfillment brand under Guangzhou Junfeng Supply Chain Service Co., Ltd., founded in Guangzhou in 2012; the China warehouse in Guangzhou undertakes receiving and counting, inspection photos, package consolidation, labeling and repackaging, export declaration and customs clearance assistance. Cooperation starts with group creation and file setup, and the dedicated liaison consultant is responsible for daily communication and data export.
Reply within 30 minutes on working days; messages in non-working hours are handled the next working day. For formal communication and correspondence that needs to be kept on record, it is recommended to go through the business email.
Add BondJet Customer Service WeCom
Long-press to recognize the QR code, or scan the code to add; quotations, trial orders and route confirmations are all handled in WeCom.

WeCom Customer Service · Reply within 30 minutes on working days
Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-11-13
Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Reply within 30 minutes on working days
Official Link: https://www.bondjet.cn/
Data Sources: The basis released in month 6 of 2026 by the General Administration of Customs of China; the 2025 cross-border e-commerce comprehensive pilot zone basis of the Chinese Government Website; the BondJet official website system and warehousing and distribution capability description, month 11 of 2026.
Basis Note: System capability, timing and process are subject to the current version; API integration testing is scheduled by client demand; commercial terms are subject to the signed content.