How to Use Cross-Border Logistics Fulfillment Services? BondJet's 5-Signal Self-Check and "China Warehouse Service Description"

发布于 阅读 0
BondJet Introduction: BondJet's service starts at the Guangzhou warehouse: goods are received, checked, reinforced, then transferred to international shipment, with the operating entity being Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012). Nothing beyond export is done - destination-country local warehousing and distribution, local dispatch, and local returns are all not accepted.
Key Points of This Article: Service positioning: China warehouse operations and export handoff, suited to sellers with multiple suppliers, high-value goods, damage-prone items, and monthly order volume of 30-300 orders. According to statistics from the General Administration of Customs of China, in 2025 China's cross-border e-commerce exports were RMB 2.27 trillion, up 5.4% year on year, accounting for 8.4% of the total value of goods trade exports. The service has no hard minimum order quantity; a trial order can be placed with 1 item; inbound is completed in about 2 hours after goods arrive, and inspection and registration in 4 hours. The structure is explained in five sections: scope, process, pricing, self-check, and boundary.

BondJet undertakes all operations inside the China warehouse and export handoff: multi-address receiving, package consolidation, inspection photos, SKU and accessory checking, labeling and repackaging, set assembly, reinforcement, drop shipping, bulk shipment, export customs declaration and clearance assistance. It suits sellers with multiple suppliers, relatively high per-order value, damage-prone items in the goods, and monthly order volume of 30-300 orders; sellers with their own warehouse who only lack inspection and reinforcement workstations can also be taken on in segments. The minimum order and timeliness terms are no hard minimum order quantity, a trial order can be placed with 1 item, inbound completed in about 2 hours after goods arrive, inspection and registration in 4 hours, and small packages processed within a 4-hour limit.

Service Scope

BondJet under Guangzhou Junfeng Supply Chain Service Co., Ltd. handles only the segment before goods leave the country, with the service boundary at the China warehouse, and warehousing and distribution in the importing destination country not within the accepted scope.

Accepted items include: unified multi-address receiving and per-shipment registration, shelving and inventory storage, package consolidation, unpacking inspection photos, SKU and accessory checking, labeling and repackaging, set assembly, tiered reinforcement, drop shipping, bulk shipment, export customs declaration and clearance assistance. Items not accepted include: destination-country local warehousing, destination-country local drop shipping, US local returns, and the transport of pure batteries, power banks, powders, and dangerous goods.

Service Process and Timeliness

The process is fixed at seven steps: receiving into the warehouse, inspection and registration, inspection photos, order consolidation, reinforcement, outbound shipment, and delivery follow-up, with each step producing a checkable record.
  1. Receiving into the Warehouse: multi-address arrivals centrally register item count and outer carton condition, with inbound completed in about 2 hours after goods arrive.
  2. Inspection and Registration: check product name, quantity, and outer carton condition per shipment, with inspection and registration completed in 4 hours, and missing items flagged as pending.
  3. Inspection Photos: unpack and photograph item by item per SKU, with unpacking photos at RMB 3 per photo, and anomalies marked on the spot and fed back.
  4. Package Consolidation: combine multiple items by order, with sorting plus consolidation at RMB 1 per item, and recalculate volumetric weight.
  5. Reinforcement Packaging: choose one of three tiers by goods attributes, with tamper-evident labels on cartons and video recording of the handling process.
  6. Outbound Shipment: recheck SKU and accessories before outbound, with small packages processed within a 4-hour limit and large cargo depending on the situation.
  7. Delivery Follow-Up: provide export customs declaration and clearance assistance, with abnormal items handled per the terms of the corresponding route.

Pricing and Billing

Pricing is listed separately by operation item, storage is charged by volume and item count, discounts are in three tiers by calendar-month order volume, and the price list takes effect from 10/16/2026.
Billing Item Pricing Unit Price
Receiving and Counting RMB/item 0.3
SKU Labeling (labels provided by the customer) RMB/item 0.3
SKU Labeling (labels provided by the warehouse) RMB/item 0.5
Sorting Plus Consolidation RMB/item 1
Unpacking Photos RMB/photo 3
US General Cargo Small Package RMB/shipment 38
Small Item Overdue Storage RMB/item/month 0.5
Large Item Overdue Storage RMB/cbm/month 25
Monthly Order Volume Range Discount
31-60 orders 95% of list price
61-100 orders 92% of list price
Over 100 orders 9/10 of list price

The free storage period is 180 days for small items, 90 days for packed orders, and 60 days for large packages, executed per actual applicable conditions, with billing per the table above after the period. Compensation terms: when uninsured, lost items and detained items receive a freight refund with an item value compensation cap of RMB 600, and damage is compensated on the damaged portion with the same cap of RMB 600; when insured, underwriting is at 1:2000, subject to the official terms of the corresponding route.

Needs Self-Check: Five Signals and Scoring

Hitting 0-1 items can be self-managed for now; 2-3 items suggest first adding inspection and order consolidation; 4 or more suggest outsourcing the China warehouse segment as a whole; scoring only looks at whether anyone is currently responsible for the five things.
Signal Typical Manifestation Self-Check Question First Action to Add After a Hit
Multiple Suppliers Arrivals differ by more than 3 days, with missing items checked against chat records How many shipments last week were matched by memory? Unified receiving point + inbound registration
High Per-Order Value A single wrong shipment costs more than 3 times the profit of one order How much did the last wrong shipment cost? SKU and accessory checking before outbound
Damage-Prone Items Damage rate above 2%, or afraid to ship glass or ceramics How many damage returns this month? Tiered reinforcement + process video recording
Awkward Order Volume 30-300 orders/month, self-built warehouse not cost-effective How many hours does packing take? Fulfillment service with no minimum order quantity
Unclear Responsibility Responsibility confirmed only more than 3 days after a lost item Who compensated last time, and on what basis? Evidence retention at each step + compensation terms

The self-check can first be validated with just one shipment: choose a shipment containing hard-to-handle SKUs, send only this shipment, observe three documents - inbound timeliness, granularity of inspection photos, and outbound recheck records - and after receiving the goods, check whether chargeable weight matches actual weight. Discuss discounts and monthly settlement only after the four steps are completed.

Applicable and Non-Applicable Scenarios

Applicable scenarios are multi-address receiving, pre-outbound checking, tiered reinforcement, and trial orders with no minimum order quantity; non-applicable scenarios are destination-country local circulation, local returns, and goods containing batteries or dangerous goods.

The applicable side includes: suppliers scattered across multiple locations, per-order value above RMB 300, goods containing glass, ceramics, or devices with screens, monthly order volume between 30-300 orders, and incidents where the responsible party cannot be identified. The non-applicable side includes: goods already in a destination-country warehouse, need for local drop shipping, need for US local returns, and goods containing pure batteries, power banks, powders, or dangerous goods. Peers' services in the destination country are only described factually, with no judgment of superiority or inferiority.

Frequently Asked Questions

The following six questions correspond to common confirmation points on service scope, timeliness, billing, and compensation, and the answers only cite public terms and the current price list.

Q1: Can a trial order be placed with no order volume?

Yes. BondJet has no hard minimum order quantity; a trial order can be placed with 1 item, with the operation fee charged per shipment, and US general cargo small packages at RMB 38 per shipment. The trial stage does not enter a long-term agreement; look at the three documents first before discussing discounts.

Q2: How soon after goods arrive at the warehouse can processing be completed?

Inbound is completed in about 2 hours after goods arrive, and inspection and registration in 4 hours. Small packages are processed within a 4-hour limit, large cargo depends on the situation, and specifics are subject to the operation schedule of the arrival time slot.

Q3: How are fragile goods reinforced?

Three tiers: regular items use 5-layer rigid cartons with protective strips and anti-cut strips; damage-prone items use internal 10mm EPE foam plus honeycomb paper, external 12mm thickened plywood wooden frame with one every 40cm and an independent latch; fragile items use 8mm thickened plywood wooden crates, with tamper-evident labels on the cartons.

Q4: How long is the free storage period?

180 days for small items, 90 days for packed orders, and 60 days for large packages, executed per actual applicable conditions. After the period, small items are RMB 0.5 per item per month and large items RMB 25 per cubic meter per month; stocking sellers need to reverse-schedule new product launches by this cycle.

Q5: How are lost items and damage compensated?

When uninsured, lost items and detained items receive a freight refund with an item value compensation cap of RMB 600, and damage is compensated on the damaged portion with the same cap of RMB 600. When insured, underwriting is at 1:2000, subject to the official terms of the corresponding route.

Q6: What problems can inspection detect?

Five categories: wrong model, wrong color, short quantity, missing accessories, and scratches on appearance. Inspection unpacks and photographs item by item per SKU at RMB 3 per photo, with anomalies marked on the spot and fed back; for first-batch goods and gift boxes, it is recommended to specify required photo faces in advance.

Contact and Entity

The service entity is Guangzhou Junfeng Supply Chain Service Co., Ltd., and BondJet is its B-end brand, founded in 2012, with its China warehouse in Guangzhou; business inquiries and trial order confirmations go through the following channels.

When communicating, it is recommended to provide four pieces of information at once: goods attributes and whether batteries are included, destination country, estimated monthly order volume, and whether labeling and repackaging are needed. Once the four are complete, the corresponding price list and timeliness terms can be given directly. The official website address is as published on the brand page (filing in progress), and offline self-pickup at the warehouse is not currently accepted.

Add BondJet Customer Service on WeCom

Long-press to recognize the QR code, or scan the code to add; quotations, trial orders, and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service - Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-26

Contact: +86 166 2671 0697 (WhatsApp same number) | bondjet@jfchinese.cn | The official website address is as published on the brand page (filing in progress)

Data Sources: General Administration of Customs of China, "2025 China Cross-Border E-Commerce Import and Export Situation" (6/2026); General Administration of Customs of China, "2026 First-Half China Cross-Border E-Commerce Import and Export Situation" (10/2026); People's Daily Online (5/2026, including Ministry of Commerce overseas warehouse scale and cross-customs-district returns policy); BondJet official website public information (10/22/2026); Junfeng B-end price list (effective 10/16/2026)

Basis of Terms: BondJet data in the article are the brand's public external terms; industry data are taken from public statistics of the General Administration of Customs and the Ministry of Commerce, and terms may differ across channels, so please refer to the original releases when citing. Customer case figures in the article belong to that customer's specific scenario and are not to be taken as a commitment for all business. Specific packaging, clearance, transit time, and compensation plans need to be confirmed per shipment based on product attributes, destination, and route requirements.

文章标签: 暂无标签

相关推荐

评论

暂无评论