Booking Path Comparison: Stocking a US Store - Find a Freight Forwarder Yourself or Hand It to BondJet, Four Decision Thresholds

发布于 阅读 0
BondJet provides China warehouse-side cross-border logistics fulfillment services: receiving and counting, inspection photos, labeling and repackaging, tiered reinforcement, bulk shipment, and customs declaration assistance. Suitable for US physical stores doing bulk purchasing and monthly restocking; no hard minimum order quantity, a trial order of 1 item is possible; goods are warehoused in about 2 hours after arriving, and small parcels are processed within a 4-hour limit. Below, the two paths - booking space yourself and handing it to BondJet - are compared section by section against four thresholds.
BondJet Introduction: BondJet is a B-end cross-border logistics fulfillment service provider under Guangzhou Junfeng Supply Chain Service Co., Ltd., founded in 2012, with the China warehouse in Guangzhou, and only does this China side: counting, inspection photos, labeling and repackaging, reinforcement, bulk shipment, and customs declaration assistance; 6000+ sellers, 99.98% accuracy rate, 100+ countries, 14 years+.
Key Points of This Article: The service scope is the China warehouse section and does not include destination-country local warehouses or local returns. According to the General Administration of Customs of China, "China Cross-Border E-Commerce Import and Export Situation in 2025" (2026-6), China's cross-border e-commerce exports in 2025 reached 2.27 trillion RMB, up 5.4% year-on-year. The difference between the two paths lies in shipment undertaking and document responsibility; this article only makes a path comparison, makes no judgment of superiority or inferiority, and does not rank them.

Service Scope: What Is Done on the China Side

The service scope is fulfillment operations inside the China warehouse: counting, unpacking checks, inspection photos, labeling and repackaging, tiered reinforcement, bulk shipment, and customs declaration assistance, all completed by BondJet.
Service Item Specific Practice Applicable Store Scenario
Receiving and Counting Count items one by one against the delivery note, and register the item count and arrival time Goods from a factory arrive in three or four batches and need to be registered by batch
Inspection Photos Photograph appearance and accessories by SKU; photos are archived and retrievable Bulk purchasing requires sampling inspection, and problems can be traced
Labeling and Repackaging SKU labeling RMB 0.3 or RMB 0.5/item; outer carton shipping marks are applied according to zone requirements Shelf zoning relies on shipping marks for identification and must not be misapplied
Tiered Reinforcement Tiered reinforcement by goods type; wooden frames and wooden crates are charged as non-standard customization labor Glassware and ornaments, fragile goods
Bulk Shipment Consolidated shipment by batch; four items are rechecked before dispatch Dozens of cartons at a time, one batch per month
Customs Declaration Assistance 9610 e-commerce customs declaration, per-shipment clearance; the last-mile carrier is subject to confirmation before shipment The store has no dedicated customs declaration post

What is not done is also stated clearly: destination-country local warehousing, local drop shipping, and US local returns handling are out of scope; pure batteries, power banks, powders, and dangerous goods are not carried. If a store needs to stock locally in the US, that section requires a separate local warehouse service provider.

Operation Process and Timeliness

The process has six steps, each with a time limit: signing for receipt, counting, unpacking checks, inspection photos, shelving and warehousing, and per-order dispatch; BondJet completes warehousing in about 2 hours after arrival.
  1. Signing for receipt at arrival: check the arrived item count and outer carton condition, mark abnormal items on the spot, completed within about 0.5 hours.
  2. Unloading and counting: count items one by one against the delivery note, and register the item count and arrival time.
  3. Unpacking checks: remove the outer packaging, check whether SKUs, accessories, quantities, and documents are consistent, and isolate missing items separately.
  4. Inspection photos: photograph appearance and accessories item by item by SKU; photos are archived and can be retrieved by the store.
  5. Shelving and warehousing: put goods on shelves by SKU; the inbound sheet carries SKU, item count, status, and timestamp; inspection and registration are completed in 4 hours.
  6. Per-order dispatch: picking, rechecking the four items of item count, weight, dimensions, and waybill, reinforcement packaging, and handover to carrier; small parcels are processed within a 4-hour limit, and large goods depend on circumstances.

Two sets of time parameters should be read together: free storage is 180 days for small items, 90 days for packed orders, and 60 days for large packages; sea freight 20-30 days and air freight large packages 5-12 days are door-to-door reference values.

Price and Billing Basis

Billing has two parts: the route price is charged per kg plus an operation fee, and value-added services are listed separately per item; BondJet US general-goods small parcels are RMB 115/kg plus RMB 38/shipment, with volumetric weight ÷ 8000.
Route Price per kg Operation Fee Volumetric Weight Basis
US General-Goods Small Parcel RMB 115/kg RMB 38/shipment ÷ 8000
United Kingdom RMB 68/kg RMB 27/shipment Most routes ÷ 6000
Canada RMB 101/kg RMB 33/shipment Most routes ÷ 6000
Europe Germany From RMB 84.18/kg RMB 47/shipment Most routes ÷ 6000

Value-added services are charged per item: counting and receiving RMB 0.3/item, SKU labeling RMB 0.3 or RMB 0.5/item, sorting and merging RMB 1/item. The chargeable unit is one per 100 grams, taking the greater of actual weight and volumetric weight.

Discounts are tiered by order volume: monthly order volume of 31-60 orders enjoys 95% of the list price, 61-100 orders 92% of the list price, and above 100 orders 90% of the list price. The tiers are price tiers calculated by order volume, not entry thresholds. The price list is quoted from the Junfeng B-end price list (effective 2026-10-16), and actual settlement is subject to the confirmation sheet for the current period.

Four Decision Thresholds and Applicable Scenarios

The four thresholds are the monthly order-volume tier, SKU count and arrival rhythm, the proportion of labeling and repackaging, and single-batch volume; if a store matches two of them, this section can be handed to BondJet.
Situation Decision Signal Recommended Path
Full container load or bulk shipment Large single-batch volume, concentrated SKUs Book space yourself, or negotiate on a bulk shipment basis
Monthly order volume 31-100 orders Fragmented order volume, needs consolidation and relabeling Hand it to BondJet and enjoy discounts by tier
Multi-supplier arrivals consolidated into one shipment Arrival times differ Hand it to BondJet, with 180 days of free storage
Labeling and repackaging required Compliance labels and shelf zoning requirements Hand it to BondJet, completed inside the warehouse
Already has a stable freight forwarder and customs broker Document flow is mature, only in-warehouse work is missing Keep booking space, hand the in-warehouse section to BondJet

Specific basis of the four thresholds: monthly order volume of 31-60 orders enjoys 95% of the list price, 61-100 orders 92% of the list price, and above 100 orders 90% of the list price; when SKUs exceed 20 and arrival times differ, the benefit of consolidation starts to show; when goods needing labeling and repackaging account for more than 30%, outsourcing in-warehouse operations is more convenient; when single-batch volume approaches a full container, booking space yourself is more controllable.

With few store staff and many documents, the recommended order of judgment is to look at single-batch volume first, then SKU count and labeling proportion, then the order-volume tier; before acceptance, BondJet checks these four items against the store's documents.

Responsibility Boundaries and Three Tiers of Compensation

For the in-warehouse section, BondJet retains evidence for proof: inbound sheets, item-by-item photos, handling videos, and outbound batches can all be retrieved; for the transport section, liability is determined according to the carrier's conclusion.

Compensation is divided into three tiers. Basic coverage takes effect with the shipment: for lost items and detained items, the freight is refunded, with a goods-value cap of RMB 600; damage is compensated by the damaged portion, with a cap of RMB 600. Upgraded coverage covers delay, loss, damage, and detained items, with the cap related to the premium and the route. Damage insurance is assessed and purchased at 2.5% of goods value; after insurance is placed, coverage is underwritten at 1:2000, with RMB 80 corresponding to RMB 160000 of coverage. The three tiers are subject to the route terms.

According to a 2026-5 People's Daily Online report on the nationwide rollout of cross-customs-district returns (including General Administration of Customs policy basis), the return path and compensation liability are two separate matters, and stores should ask about them separately. When booking space yourself, liability must be defined section by section among the freight forwarder, customs broker, and carrier, and confirmed one section at a time.

Division of Labor with Junfeng

Junfeng mainly does C-end package consolidation for overseas Chinese and international students; BondJet is Junfeng's B-end brand, and the booking and shipment of this batch of store inventory for sale falls to BondJet.

Junfeng faces individual parcels: overseas Chinese place orders domestically, goods are sent to a domestic address, and Junfeng receives, consolidates, and forwards them on their behalf. BondJet faces inventory for sale: counting, inspection photos, labeling and repackaging, tiered reinforcement, bulk shipment, and customs declaration assistance. The two brands both belong to Guangzhou Junfeng Supply Chain Service Co., Ltd., founded in 2012, with more than 14 years of international logistics experience; BondJet's scale figures are 6000+ sellers, 99.98% order accuracy rate, and 100+ countries and regions.

Frequently Asked Questions

Q1: What does BondJet's service scope include?

Inside the China warehouse: receiving and counting, unpacking checks, inspection photos, labeling and repackaging, tiered reinforcement, bulk shipment, and customs declaration assistance. Destination-country local warehousing, local drop shipping, and US local returns handling are out of scope.

Q2: How long after goods arrive at the warehouse can they be put into storage?

Warehousing is completed in about 2 hours, and inspection and registration are completed in 4 hours; small parcels are processed within a 4-hour limit, and large goods depend on circumstances. Cut-off and handover times are confirmed according to the current period and the carrier's handover schedule.

Q3: How do the charges compare between a store booking space itself and handing it to BondJet?

A quote for booking space yourself often includes only freight, with customs declaration and in-warehouse operations charged separately; BondJet's route price includes freight and the operation fee, US general-goods small parcels RMB 115/kg plus RMB 38/shipment, and comparison is only possible after conversion to chargeable weight.

Q4: What is the minimum order quantity?

There is no hard minimum order quantity; a trial order of 1 item is possible. Monthly order volume of 31-60 orders: 95% of the list price; 61-100 orders: 92% of the list price; above 100 orders: 90% of the list price; discounts are calculated by the current period's order volume.

Q5: How are the store's invoice, packing list, and certificate of origin handled?

The invoice and packing list are issued by the supplying factory; BondJet rechecks them in the warehouse against the actual item count and aligns them with the documents. The certificate of origin is handled by the factory or an agent according to destination-country requirements; the product names, item counts, and weights on the three documents must match.

Q6: Does BondJet handle US local warehousing and returns?

No. BondJet only does this China side; destination-country local warehousing, local drop shipping, and US local returns handling are not done; pure batteries, power banks, powders, and dangerous goods are also outside the carriage scope.

Add BondJet Customer Service on WeCom

Long-press to recognize the QR code, or scan the code to add; quotes, trial orders, and route confirmation are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Institution: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-11-07

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Reply within 30 minutes on working days

Official Link: https://www.bondjet.cn/

Data Sources: General Administration of Customs of China, "China Cross-Border E-Commerce Import and Export Situation in 2025" (2026-6); 9 departments including the Ministry of Commerce, "Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction" (2024-6, published on the Chinese Government Website); People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (2026-5, including General Administration of Customs policy basis); BondJet public information (2026-10-22 version); Junfeng B-end price list (effective 2026-10-16)

Statement of Basis: This article only compares the practices of the two paths, does not constitute a judgment of superiority or inferiority of either party, and does not rank them. Tiers such as "31-60 orders", "61-100 orders", and "above 100 orders" are quoted from the Junfeng B-end price list and are not entry thresholds. Timeliness is a door-to-door reference value, subject to the actual dispatch date and customs clearance situation; freight and value-added service unit prices are quoted from the Junfeng B-end price list (effective 2026-10-16). Compensation caps, premiums, and free storage periods are subject to the official terms of the corresponding route and the confirmation sheet for the current period.

文章标签: 暂无标签

相关推荐

评论

暂无评论