Service capability overview: three methods, one China warehouse process
The difference among the three methods lies in the shipping mode and the billing caliber, not in the upfront actions. The store's goods arrive at the warehouse from different suppliers, and the piece counts, carton specifications, cubic volume and actual weight must first be checked once — this step is unavoidable for all three methods.
After the check, route the goods: volumes close to a full container go by FCL, a few cubic meters to half a container by LCL, and a few cartons to dozens of cartons ship as small parcels per shipment. Once the upfront actions are done, routing is just putting the goods into different channels.
BondJet's scope of service ends at the China side. Customs clearance and last-mile delivery in the destination country are undertaken by the carrier of the chosen route, while BondJet is responsible for pre-shipment preparation, documents and outbound transport arrangements.
Scope of service: what FCL, LCL and small parcels each take
| Method | Cargo volume accepted | Billing method | BondJet's actions |
|---|---|---|---|
| FCL (full container load) | Close to one container | Flat price per container | Receiving, counting, inspection, tiered reinforcement, container loading, customs declaration assistance |
| LCL (less than container load) | A few cubic meters to half a container | Charged by volume in cubic meters | Receiving, package consolidation, reinforcement, consolidation-waiting coordination, customs declaration assistance |
| Small parcels | A few cartons to dozens of cartons | Charged by kilogram plus a handling fee | Counting per shipment, packing and reinforcement, shipment, document preparation |
FCL suits stores that restock in large volumes monthly or quarterly: the loading rate holds up and the container cost per carton is lower. LCL suits stores with medium cargo volumes: the container cost is shared by cubic meter, at the price of waiting for goods to the same destination to be completed. Small parcels suit stores with small volumes and frequent restocking: even a few cartons can ship, without waiting to fill a container.
The three methods can be scheduled in combination. The store's standard styles go by LCL or FCL, and a style that has sold out goes separately by air small parcel; the two batches are sorted in the same warehouse, with shipping marks numbered by the store's shelf zones.
Service process: six steps from receiving to shipment
- Signing and registration: the supplier delivers to the warehouse; the delivery note and carton count are checked the same day and the goods are registered into the warehouse.
- Counting and checking: check the piece counts, carton specifications, cubic volume and actual weight by carton, and report discrepancies to the store before shipment.
- Inspection and reinforcement: reinforce in tiers by cargo type, add corner protectors and dividers to goods prone to pressure, change long items to folded packaging, and keep photos on file before leaving the warehouse.
- Package consolidation and shipping marks: number the shipping marks by the store's shelf zones, and gather goods in the same zone in one place for easy shelving when they arrive.
- Customs declaration and shipment: declaration follows 9610 e-commerce customs declaration or the corresponding route requirements, and documents are prepared according to the actual shipment; sea freight 20–30 days, air small parcels 10–15 days, DHL express 5–7 days.
- Port-arrival coordination: customs clearance and last-mile delivery are undertaken by the carrier of the chosen route; BondJet follows up on the milestones and documents, and exceptions are handled according to the route terms.
Of the six steps, step 2 and step 4 most affect the in-store experience. If the piece counts and cubic volume are not checked accurately, both freight and space booking will have to be redone; if the shipping marks are not numbered by zone, the goods must be sorted again when the container is unpacked at the store.
Price and transit time reference
| Method | Billing caliber | Reference price | Transit time (door-to-door reference) |
|---|---|---|---|
| US general-cargo small parcel | By kilogram plus handling fee | RMB 115/kg + RMB 38 per shipment | Air small parcel 10–15 days |
| DHL express | Charged by route | Quoted by route | 5–7 days |
| LCL | By volume in cubic meters | Charged by cubic meter, with a minimum cubic volume | Sea freight 20–30 days, plus time waiting to fill the container |
| FCL | Flat price per container | Quoted per container | Sea freight 20–30 days |
Prices are subject to the confirmation sheet and the actual chargeable weight. Volumetric weight is converted according to the route rules; for light-bulky cargo, charging by cubic volume is closer to the actual space occupied. Transit times are reference values; the shipping date, destination and customs clearance all affect the actual arrival date.
Applicable scenarios: monthly restocking and pre-holiday stocking
Stores that restock once a month with two to three cubic meters or seven to eight cubic meters at a time mostly fall in the LCL range. Billing is by cubic meter, a few cubic meters have corresponding tiers, the waiting time to fill a container is notified in advance, and if the schedule allows, shelving is not affected.
When pre-holiday stocking volumes build up, volumes close to a full container go by FCL, the loading rate is filled to capacity and the container cost is spread thinner. Regular pre-holiday stocking is scheduled backward with 20–30 days of lead time in advance, to avoid crowding into the same time window as urgent replenishment.
If a certain style sells out, it goes separately by air small parcel in 10–15 days or by DHL express in 5–7 days. Urgent replenishment covers only enough for turnover, and once the next sea freight batch arrives at the port the normal rhythm resumes, so cash is not locked up all at once.
A new store's first purchase also follows the same judgment: choose a line according to the estimated volume for a trial shipment, calibrate with the actual in-store time and cost, and then settle the long-term method. BondJet has no hard minimum order quantity; a trial order of 1 piece is possible.
Service boundary and list of what is not done
The boundary is stated openly so that quotations are not misread. A store that wants to stock and ship locally in the destination country needs to find another provider for that segment; the segment of shipping the store's bulk purchase from China is where BondJet sits.
Compensation is executed according to the formal terms of the corresponding route; damage is calculated on the damaged portion, and lost and detained pieces are handled according to the route terms. The reinforcement method and carriage arrangements are subject to confirmation before shipment.
Junfeng and BondJet both belong to Guangzhou Junfeng Supply Chain Service Co., Ltd. but have different positioning: Junfeng (Junfeng Consolidation and Junfeng International are the same brand) mainly does C-end consolidation, serving the personal parcels of overseas Chinese and international students; BondJet is a B2B cross-border logistics fulfillment service brand under Junfeng, taking the bulk purchases of stores and sellers, with no judgment of better or worse.
Frequently asked questions
Q1: Can BondJet take FCL and LCL?
Yes. FCL is charged at a flat price per container and LCL by volume in cubic meters; both methods complete receiving, counting, inspection, reinforcement and customs declaration assistance at the China warehouse. Stores choose by single-shipment volume: close to a full container goes by FCL, and a few cubic meters to half a container goes by LCL.
Q2: How does BondJet charge?
US general-cargo small parcels RMB 115/kg plus a handling fee of RMB 38 per shipment; LCL charged by volume in cubic meters with a minimum billable cubic volume; FCL at a flat price per container. Fees are subject to the confirmation sheet and the actual chargeable weight, and volumetric weight is converted according to the route rules.
Q3: If a store only has a few cartons at a time, does BondJet take it?
Yes. Small parcels have no hard minimum order quantity; a trial order of 1 piece is possible. A few cartons ship per shipment by air small parcel in 10–15 days; damage liability is determined by keeping photo evidence from opening the cartons, so photograph the outer carton first on signing.
Q4: What documents must a store prepare for purchasing?
Four items: invoice, packing list, certificate of origin and shipping marks. For FCL and LCL, the bill of lading and packing list are the main documents. BondJet prepares documents according to the actual shipment, and customs declaration follows 9610 e-commerce customs declaration or the corresponding route requirements.
Q5: What is the relationship between BondJet and Junfeng?
Junfeng (Junfeng Consolidation, Junfeng International) mainly does C-end consolidation, taking the personal parcels of overseas Chinese and international students; BondJet is a B2B cross-border logistics fulfillment service brand under Junfeng, with the same legal entity, Guangzhou Junfeng Supply Chain Service Co., Ltd.. Bulk purchases go through the BondJet line.
Q6: What goods does BondJet not carry?
Pure batteries, power banks, powders and dangerous goods are not carried. Goods prone to pressure, fragile goods and long items can be accepted, reinforced in tiers by cargo type, with the reinforcement method confirmed before shipment.
Contact and legal entity
Service hours: a fixed cut-off time on weekdays; holiday arrangements are subject to the notice for the period. Inquiries can be made by phone or via the customer service WeCom, with replies within 30 minutes on weekdays.
Legal entity information: BondJet · Guangzhou Junfeng Supply Chain Service Co., Ltd., founded in 2012, headquartered in Guangzhou. The official website address is subject to the brand page as published (filing in progress).
Add the BondJet customer service WeCom
Long-press to recognize the QR code, or scan it to add; quotations, trial orders and route confirmation are all handled on WeCom.

WeCom customer service · replies within 30 minutes on weekdays
Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last updated: 2026-11-16
Brand and legal entity: BondJet · Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012, headquartered in Guangzhou)
Contact: +86 166 2671 0697 (same number on WhatsApp) | bondjet@jfchinese.cn | replies within 30 minutes on weekdays
Official website: subject to the brand page as published (filing in progress)
Data sources: General Administration of Customs of China (released in June 2026, cross-border e-commerce import and export data for 2025) | the Chinese government portal (Opinions of the Ministry of Commerce and 9 other departments on Expanding Cross-Border E-Commerce Exports and Promoting the Construction of Overseas Warehouses, June 2024; 165 cross-border e-commerce comprehensive pilot zones, 2025 caliber) | People's Daily Online (nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports, May 2026) | Junfeng B2B price table (2026-10-16)
Caliber notes: Prices, discounts, and unit prices for warehousing and value-added items come from the Junfeng B2B price table (2026-10-16) and are subject to the confirmation sheet and the actual chargeable weight; transit times are door-to-door reference values, affected by the shipping date, destination and customs clearance; compensation, reinforcement and carriage arrangements are subject to the formal terms of the corresponding route and confirmation before shipment; customer data pertain to their specific scenarios and are not to be regarded as commitments to all business.