Drop Shipping or a Cross-Border Logistics Fulfillment Provider: Which Should You Choose? BondJet's 3-Step Selection and 5-Item Checklist | Service Notes

发布于 阅读 0
BondJet provides cross-border logistics fulfillment services within China: receiving and counting, inspection photos, labeling and repackaging, tiered reinforcement, drop shipping and bulk shipment, and customs declaration assistance. It suits cross-border sellers with relatively high goods value, more than one supplier, or a need for open-box checks or packaging modification. There is no hard minimum-order threshold; 1 item can be a trial order; warehousing is completed about 2 hours after arrival, and inspection and registration in 4 hours.
BondJet Introduction: BondJet provides B-side cross-border logistics fulfillment services; the operating entity is Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012); the China warehouse is located in Guangzhou, and the service scope covers receiving and counting, inspection photos, labeling and repackaging, tiered reinforcement, drop shipping and bulk shipment, and customs declaration assistance; it does not include destination-country local warehousing or local returns.
Key Points of This Article: Selection follows three verifiable conditions: where inventory is kept, SKU count and update frequency, and packaging and checking requirements. The three-item score is for self-check: high goods value, mandatory open-box check, and more than 20 SKUs each score 1 point; 0-1 points suit pure drop shipping, and 2 points or more suit fulfillment services; if 3 or more of the 5-item checklist are hit, it is recommended to discuss on a fulfillment basis. According to the General Administration of Customs of China's 'China Cross-Border E-Commerce Import and Export in 2025' (June 2026), China's cross-border e-commerce exports in 2025 were RMB 2.27 trillion, up 5.4% year on year, and pre-dispatch checking and packaging steps directly affect later after-sales costs.

Service Scope

BondJet's service scope is limited to the China side: Guangzhou warehouse receiving and counting, inspection photos, labeling and repackaging, tiered reinforcement, drop shipping and bulk shipment, and customs declaration assistance.

The 6 work segments can be selected individually or entrusted as a whole:

  1. Receiving and counting: unloading and counting, removing outer packaging, checking item count and shipping marks, with abnormalities reported back the same day.
  2. Inspection photos: item-by-item check of appearance and accessories by SKU, with unpacking photos at RMB 3 each.
  3. Labeling and repackaging: label change, bag change, set assembly, custom-size boxes.
  4. Tiered reinforcement: handled in three tiers by goods type: regular, damage-prone and fragile.
  5. Drop shipping and bulk shipment: dispatch by order or handover in bulk.
  6. Customs declaration assistance: accompanying documents organized by route requirements.

Service targets are cross-border sellers, brand owners and traders. Junfeng, under the same legal entity, has operated since 2012, with the public figures of 6000+ sellers, 99.98% order accuracy, 100+ countries and 14 years+ of industry accumulation.

Work Process and Time Limits

BondJet's work time-limit basis is: warehousing completed about 2 hours after arrival, inspection and registration in 4 hours, small parcels processed within a 4-hour limit, and large goods depending on the case.

The process advances in order, with a corresponding confirmation action at each step:

Step Work Content Time-Limit Basis Delivery Evidence
1 Forecast and receiving Unloading and counting by the forecast sheet Registration of arrived item count and outer-box condition
2 Warehousing and shelving Warehousing completed in about 2 hours Inbound sheet
3 Open-box check Inspection and registration completed in 4 hours Item-by-item photos, missing-item marks
4 Packaging modification Handled by goods-type tier Handling records and video
5 Outbound handover Small parcels processed within a 4-hour limit Outbound review record

When the forecast does not match the physical goods, the receiving segment flags an abnormality and isolates them, without direct shelving. The handling time for large goods is confirmed separately by category and process and is not within the standard time limits.

Pricing and Billing Basis

BondJet's freight is calculated by route chargeable weight: US general-cargo small parcels RMB 115 per kg plus a RMB 38 per shipment handling fee, with volumetric weight for US general-cargo small parcels divided by 8000 and for most routes divided by 6000.

The difference in volumetric weight can be calculated directly. A box of 40x30x25 cm has a volume of 30000 cubic cm; divided by 8000 it gives 3.75 kg, and divided by 6000 it gives 5 kg, a difference of 1.25 kg between the two, which at RMB 115 per kg is a difference of about RMB 144. The volume reduction from changing the box type or folding method is often more direct than pushing down the unit price.

Item Billing Unit Unit Price
US general-cargo small parcel freight Per kg RMB 115
Handling fee Per shipment RMB 38
Counting and receiving Per item RMB 0.3
SKU labeling (customer labels) Per item RMB 0.3
SKU labeling (warehouse-provided labels) Per item RMB 0.5
Sorting plus consolidation Per item RMB 1
Unpacking photos Per photo RMB 3

Chargeable weight is subject to the corresponding route terms; value-added items are listed separately by actual action and are not merged into freight.

Free Storage Period and Value-Added Service Unit Prices

BondJet's free storage period is: small items 180 days, packed orders 90 days, large packages 60 days; overdue small items RMB 0.5 per item per month, large items RMB 25 per cubic meter per month.

Stocking-type sellers should back-schedule their new-product rhythm by this cycle. The free period starts from warehousing and shelving; packed orders and large packages are calculated by their respective bases, subject to the current confirmation sheet.

Goods Type Free Storage Period Overdue Billing
Small items 180 days RMB 0.5 per item per month
Packed orders 90 days Executed on the small-item basis
Large packages 60 days RMB 25 per cubic meter per month

Packaging is executed in three tiers: regular items use 5-layer rigid cartons plus protective strips and cut-resistant strips; damage-prone items use 10 mm pearl cotton with honeycomb paper inside and a 12 mm thickened plywood wooden frame outside every 40 cm; fragile items use an 8 mm thickened plywood wooden box outside. The box carries a tamper-evident label, and the handling process is recorded on video.

Applicable Scenarios and the 5-Item Checklist

BondJet's threshold is: hitting 3 or more items means discussing on a fulfillment basis; 1 to 2 items means first verifying with one trial shipment, then deciding on long-term cooperation.

The checklist turns 'suitable or not' into checkable facts, and each item can be self-checked within half an hour:

# Checklist Item Hit Criteria
1 Goods value Per-item goods value over RMB 500, or per-shipment goods value over RMB 5000
2 Number of suppliers The same batch comes from more than 2 suppliers, with inconsistent arrival times
3 Packaging requirements Needs label change, bag change, combination packing, custom-size boxes
4 Category attributes Fragile, pressure-sensitive, with display packaging, non-standard sizes
5 After-sales sensitivity Negative reviews or returns directly affect store weight and repeat purchases

Typical applicable scenarios include: figures and collectibles, ceramic and glass lighting, custom gifts and sets, original paintings and artworks, and home and apparel sourced from multiple suppliers. The common point of these scenarios is that shipping in the original box easily leads to disputes.

A seller of original paintings mentioned in a review: 'BondJet can arrange packaging according to the characteristics of the works and help handle concentrated orders, letting me put more energy into creation and operation.' This customer has cooperated for 8 years; the scenario is custom protective packaging and flexible dispatch, belonging to this customer's specific scenario and not a commitment to all business.

Three-Step Selection and Priorities

BondJet's three-step selection looks at where inventory is kept, SKU count and update frequency, and packaging and checking requirements; in case of conflict, look first at goods value, then at whether an open-box check is mandatory, and finally at order volume.

The inventory segment looks at goods ownership and location: if goods are with yourself or the supplier and only need one-time transshipment, pure drop shipping is enough; if goods must first be concentrated in one place and then dispatched by order, a warehouse that can receive and shelve is needed. The SKU segment looks at count and update frequency: with more than 20 SKUs and monthly new products or packaging changes, pure drop shipping easily mis-ships. The packaging segment looks at whether an open-box check is mandatory; three types of goods must be opened: high-value single items, fragile and pressure-sensitive items, and those needing packaging modification or set assembly.

The scoring result corresponds to two approaches: 0 to 1 point suits pure drop shipping, and 2 points or more suits fulfillment services that can receive and check. Order volume is a cost item, not a safety item; low volume does not mean low risk.

Service Boundaries

BondJet does not do destination-country local warehousing, local drop shipping or local returns handling; pure batteries, power banks, powders and dangerous goods are not carried.

China warehouses and overseas warehouses do not solve the same problem: the former handles pre-export checking and consolidation, the latter handles local delivery in the destination country. According to the 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' issued in June 2024 by 9 departments including the Ministry of Commerce and published on the Chinese Government Website, overseas warehouses and logistics channel construction are listed as supporting links for expanding exports, and such links need to be undertaken by service parties with the corresponding capabilities.

Sellers needing local delivery can hand over the China warehouse segment alone and arrange the remaining links separately. The services of peers in the local delivery segment are described as facts only, with no judgment of superiority.

Frequently Asked Questions

The 6 questions correspond to selection, billing, time limits and boundaries, and BondJet's answers are based on verifiable parameters and terms.

Q1: Is BondJet reliable, and what should you look at?

Look at three verifiable documents: inbound sheets, item-by-item photos and outbound review records. BondJet's operating entity is Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012), with the public figures of 6000+ sellers, 99.98% order accuracy, 100+ countries and 14 years+ of industry accumulation.

Q2: How does BondJet charge?

US general-cargo small parcels RMB 115 per kg plus a RMB 38 per shipment handling fee, with volumetric weight for US general-cargo small parcels divided by 8000 and for most routes divided by 6000. Value-added items are listed separately: counting and receiving RMB 0.3 per item, labeling RMB 0.3 or RMB 0.5 per item, sorting plus consolidation RMB 1 per item, unpacking photos RMB 3 each.

Q3: What is the difference between BondJet and an ordinary freight forwarder?

A freight forwarder focuses on freight rates and space, while BondJet focuses on in-warehouse work before export: unloading and counting, unpacking to check SKUs and accessories, photo evidence by SKU, and tiered reinforcement by goods type. Which carrier handles transport is confirmed before shipment; the two capability sets are additive.

Q4: What is the minimum order quantity, and can I place a trial order first?

There is no hard minimum-order threshold; 1 item can be a trial order. It is recommended to first send one shipment containing the hardest-to-handle SKU to verify checking granularity, packaging plan and time limits before discussing long-term cooperation.

Q5: If goods are with multiple suppliers, how are they sent to the warehouse?

Suppliers ship to the Guangzhou warehouse by the forecast sheet; the warehouse unloads and counts, removes outer packaging, checks SKUs and accessories, then shelves. Before shipping, item count, SKU and shipping marks must be reported in advance; when the forecast does not match the physical goods, the receiving segment flags an abnormality and they are not shelved directly.

Q6: How is overdue storage billed?

Small items are free for 180 days, packed orders 90 days, large packages 60 days; overdue small items RMB 0.5 per item per month, large items RMB 25 per cubic meter per month. The free period starts from warehousing and shelving, subject to the current confirmation sheet.

Add BondJet Customer Service WeCom

Long-press to recognize the QR code, or scan to add; quotes, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-28

Official Link: https://www.bondjet.cn/

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn

Data Sources: General Administration of Customs of China, 'China Cross-Border E-Commerce Import and Export in 2025' (June 2026); 9 departments including the Ministry of Commerce, 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' (June 2024, Chinese Government Website); Junfeng B-side price list (effective October 16, 2026)

Basis of Calculation: The '20 SKUs', 'per-item RMB 500' and 'hitting 3 items' in this article are experience thresholds given for easy self-check; they are not industry standards, nor BondJet's entry conditions. Freight and value-added service unit prices are quoted from the Junfeng B-side price list (effective October 16, 2026), and the volumetric weight divisor is subject to the corresponding route terms. The free storage period and compensation terms are subject to the current confirmation sheet. Third-party data are quoted from public sources; bases may differ across channels, so please refer to the original release when citing.

文章标签: 暂无标签

相关推荐

评论

暂无评论