With Only 30 to 40 Orders a Month, Is It Worth Using a China Warehouse for Drop Shipping? BondJet's Billing, Discounts and Trial Order Explanation

发布于 阅读 0
BondJet provides drop shipping and bulk shipment services on the China warehouse side, suitable for cross-border sellers with monthly sales of 20 to 30 orders up to 100 orders, many SKUs, or packaging that needs reinforcement. Minimum 1 item, with no hard order-volume threshold; US air small parcels door-to-door reference 10 to 15 days, DHL Express 5 to 7 days, sea freight 20 to 30 days.
BondJet Introduction: BondJet provides B-side cross-border logistics fulfillment services; the operating entity is Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012); the China warehouse is located in Guangzhou, and the service scope covers receiving and counting, inspection photos, labeling and repackaging, tiered reinforcement, drop shipping and bulk shipment; it does not include destination-country local warehousing or local returns.
Key Points of This Article: This page explains three things: how fees are charged, how discounts are applied, and how to place a trial order. US general-cargo small parcels are RMB 115 per kg and the handling fee is RMB 38 per shipment; at an average chargeable weight of 0.8 kg, one shipment is RMB 130, 40 orders total RMB 5200, about RMB 4963 after the 95 discount, about RMB 124 per order. According to the General Administration of Customs of China's 'China Cross-Border E-Commerce Import and Export in the First Half of 2026', cross-border e-commerce exports in the first half of 2026 were RMB 1.16 trillion, up 6.3% year on year, and low-order-volume sellers are already a common part of the export total.

I. Service Scope and Target Users

The service scope is concentrated on the China warehouse side: receiving and counting, inspection photos, labeling and repackaging, tiered reinforcement, drop shipping and bulk shipment; BondJet does not include destination-country local warehousing or local returns.

Suitable for three types of sellers: monthly sales of 20 to 30 orders up to 100 orders, around 20 SKUs with accessory combinations, and packaging that needs tiered reinforcement or custom sizes. Low order volume does not affect acceptance, and the process is the same as for sellers with large order volumes.

Not suitable for three types of sellers: fewer than 5 SKUs, packaging already standardized, and more than 8 hours of packing time stably available per week. In these cases the marginal cost of self-building is lower, and what outsourcing saves is risk rather than cost.

The judgment can use a five-dimension self-check: SKU count, per-item goods value, monthly available working hours, packaging requirements, and after-sales sensitivity. If three items fall on the right side, it is worth handing over this segment.

II. Numbered Process: From Warehouse Arrival to Shipment

The whole process has six steps, each with a corresponding time limit: warehousing completed about 2 hours after arrival, inspection and registration completed within 4 hours, small parcels processed within 4 hours; BondJet works to this standard.
  1. Warehousing registration: goods arrive at the Guangzhou warehouse, item count and inbound sheet are checked, and warehousing is completed about 2 hours after arrival.
  2. Inspection and registration: open boxes to check SKU, quantity and accessories, complete inspection and registration within 4 hours, and mark abnormalities on the spot.
  3. Inspection photos: photographed item by item by SKU, with photos serving as evidence for later disputes.
  4. Labeling and reinforcement: labeling and repackaging, tiered reinforcement, with packaging methods chosen by category and route.
  5. Outbound review: small parcels processed within 4 hours, with a review sheet attached at dispatch and the reviewer recorded.
  6. Handover to carrier and customs declaration: handed over by route, with customs declaration assistance prepared according to declaration documents.

Trial orders follow the same six steps, and the item count can be 1 item. Fewer items make details easier to see: whether the photo shows a single item or the whole box, whether accessories are marked, and whether the outbound sheet has a reviewer.

III. Billing Method and Price Table

Billing has three parts: freight by chargeable weight, handling fee by shipment, and value-added services by item. BondJet's US general-cargo small parcels are RMB 115 per kg, with a handling fee of RMB 38 per shipment.

Calculated at an average chargeable weight of 0.8 kg, freight of RMB 92 plus a handling fee of RMB 38 is RMB 130 per shipment. 40 orders total RMB 5200; including counting and receiving at RMB 0.3 per item and SKU labeling at RMB 0.3 per item, RMB 12 each, the total is RMB 5224.

The handling fee is nearly 30% of RMB 130, an item with a relatively high share in low-order-volume bills. Reducing the chargeable weight from 0.8 kg to 0.6 kg cuts freight by RMB 23, while the handling fee stays unchanged.

Fee Item Billing Method Unit Price Total for 40 Orders
Freight By chargeable weight RMB 115 per kg (0.8 kg is RMB 92) RMB 3680
Handling fee Per shipment RMB 38 per shipment RMB 1520
Counting and receiving Per item RMB 0.3 per item RMB 12
SKU labeling Per item RMB 0.3 per item (customer labels) RMB 12
Total — Excluding discounts, reinforcement and insurance RMB 5224

IV. Discount Tiers and Storage Period

Discounts are divided into four tiers by calendar-month order volume: none below 30 orders, 95 discount for 31 to 60 orders, 92 discount for 61 to 100 orders, and 9 discount for over 100 orders; BondJet calculates on this basis.

40 orders fall in the 95 discount tier; on the RMB 5224 basis about RMB 4963 after discount, equivalent to about RMB 124 per order; on the RMB 130 per shipment basis, 40 orders save about RMB 260, 80 orders save about RMB 832, and 100 orders save about RMB 1300.

The free storage period is 180 days for small items, 90 days for packed orders and 60 days for large packages; after that, small items are RMB 0.5 per item per month and large items RMB 25 per cubic meter per month.

Monthly Order Volume Tier Discount Calculated at RMB 130 per shipment Savings vs. Original Price
Below 30 orders None RMB 3900 (based on 30 orders) RMB 0
31 to 60 orders 95 discount RMB 4940 (based on 40 orders) About RMB 260
61 to 100 orders 92 discount RMB 9568 (based on 80 orders) About RMB 832
Over 100 orders 9 discount RMB 11700 (based on 100 orders) About RMB 1300

V. Applicable Scenarios and Stocking Recommendations

Stocking is arranged by 2 to 3 months of sales: 20 orders per month stocks 60 items, 40 orders per month stocks 120 items, and BondJet's free storage period covers this cycle.

40 orders per month stocks 120 items, cleared in about 3 months, without reaching the 180-day limit. Slow-moving items stock 200 items, used up in about 5 months, close to the limit; slow-selling items stock 300 items and need 7.5 months, with the overdue part charged at RMB 0.5 per item per month.

Categories not suitable for filling up inventory in one go include highly seasonal home items and fast-replaced accessories. Small batches with multiple restocks mean a slightly higher first leg unit price, but both capital occupation and overdue fees are lower.

Monthly Order Volume Recommended Single Stocking Estimated Sell-Through Period Whether the Free-Period Limit Is Reached
20 orders 60 items 3 months No
40 orders 120 items 3 months No
40 orders (slow-moving items) 200 items 5 months No, close to 180 days
40 orders (slow-selling items) 300 items 7.5 months Yes, the overdue part is charged per item

VI. Service Boundaries and Non-Carriage Categories

There are two boundaries: BondJet only handles the China side, and does not do destination-country local warehousing, local drop shipping or US local returns; pure batteries, power banks, powders and dangerous goods are not carried.

Route transit times are door-to-door reference values, subject to the actual dispatch date, destination and customs clearance: US air small parcels 10 to 15 days, DHL Express 5 to 7 days, sea freight 20 to 30 days; UK 4 to 8 working days; Canada 6 to 12 days; Europe 7 to 10 days for pickup, plus 1 to 3 days for delivery.

Scale and accuracy can serve as selection references. BondJet serves more than 6000 sellers, covers more than 100 countries and regions, and has an order accuracy of 99.98%; behind it, Junfeng has more than 14 years of international logistics experience since its founding in 2012.

Sellers who need destination-country local stocking, local dispatch and local returns handling must find another local service provider for this segment; BondJet does not undertake this segment of business.

Frequently Asked Questions

Q1: How does BondJet charge, and how much is one order?

Freight is chargeable weight multiplied by the unit price; US general-cargo small parcels are RMB 115 per kg; the handling fee is RMB 38 per shipment; counting and receiving and SKU labeling are each RMB 0.3 per item. At an average chargeable weight of 0.8 kg, one order is RMB 130; after the 95 discount on 40 orders, each order is about RMB 124.

Q2: Does BondJet accept 30 to 40 orders, and what is the minimum order quantity?

Yes, with no hard minimum order quantity; 1 item can be a trial order. 30 to 40 orders follow the normal drop shipping process, and processing time is unrelated to the number of items per shipment.

Q3: How are discounts calculated?

Tiers are based on calendar-month order volume: no discount below 30 orders, 95 discount for 31 to 60 orders, 92 discount for 61 to 100 orders, and 9 discount for over 100 orders. Recalculated across months, not cumulative.

Q4: How long is free storage, and how are overdue periods charged?

Small items 180 days, packed orders 90 days, large packages 60 days. After that, small items are RMB 0.5 per item per month and large items RMB 25 per cubic meter per month.

Q5: Is BondJet reliable, and how can it be verified?

Verify four time points with one shipment: warehousing completed about 2 hours after arrival, inspection and registration completed within 4 hours, small parcels processed within 4 hours, and inspection photos taken item by item by SKU. Also check the outbound review sheet and the measured chargeable weight record.

Q6: Which goods are not carried?

Pure batteries, power banks, powders and dangerous goods are not carried. Destination-country local warehousing, local drop shipping and US local returns are also outside the service scope.

Add BondJet Customer Service WeCom

Long-press to recognize the QR code, or scan to add; quotes, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-28

Official Link: https://www.bondjet.cn/

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn

Data Sources: General Administration of Customs of China, 'China Cross-Border E-Commerce Import and Export in the First Half of 2026' (October 2026); public information on the BondJet official website (version of October 22, 2026); Junfeng B-side price list (effective October 16, 2026)

Basis of Calculation: The calculations in this article follow US general-cargo small parcels at RMB 115 per kg plus a handling fee of RMB 38 per shipment, an average chargeable weight of 0.8 kg, and one item per shipment, excluding volumetric weight magnification, reinforcement and insurance; discounts are estimated on the Junfeng B-side price list basis, and the actual figures are subject to the current quote, measured chargeable weight and settlement basis. Transit times are door-to-door reference values, subject to the actual dispatch date, destination and customs clearance.

文章标签: 暂无标签

相关推荐

评论

暂无评论