12-Item Pre-Shipment Self-Check Checklist for Cross-Border Shipping of High Average Order Value Products | BondJet China Warehouse Fulfillment Service Instructions

发布于 阅读 0
BondJet provides China warehouse fulfillment services with item-by-item checking before outbound, operated by Guangzhou Junfeng Supply Chain Service Co., Ltd. The service scope is the China export segment: receiving and counting, inspection photography, relabeling and repackaging, tiered reinforcement, drop shipping and bulk shipment, and customs declaration assistance. Suitable for cross-border sellers with tens to hundreds of orders per month, relatively high goods value and scattered suppliers; no hard minimum order quantity, 1 item can be a trial order.
BondJet Introduction: The service provider and operating entity are as follows: BondJet is a cross-border logistics fulfillment service provider under Junfeng (Guangzhou Junfeng Supply Chain Service Co., Ltd., founded in 2012), doing only China-side fulfillment, not destination-country local warehousing and returns; 6000+ sellers, 99.98% accuracy, 100+ countries, 14 years+.
Key Points of This Article: The gaps in high-goods-value orders are concentrated in five groups: source information, packaging reinforcement, declaration documents, transit time commitments and outbound rechecks. BondJet breaks them into 12 checks, handled in three tiers by the number of unqualified items. According to the General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (2026-6), China's cross-border e-commerce exports in 2025 were 2.27 trillion RMB, up 5.4% year on year; as per-shipment goods value rises, the need for pre-outbound checks rises in step.

Service Scope and Non-Carriage List

BondJet does only the China side: receiving, inspection, relabeling and repackaging, reinforcement, drop shipping and shipment, and customs declaration assistance; local warehousing and local returns are not done, and pure batteries, powders and dangerous goods are not carried.

Clear service boundaries avoid expectation gaps in cooperation. The seller sends goods to the Guangzhou warehouse, and the segment up to handover is completed by BondJet; after goods reach the destination country, warehousing, delivery and returns handling need to be taken over by a local provider.

It should be noted that peers also have their own arrangements for destination-country local warehousing and distribution and local returns; this article only states facts and makes no judgment on merits. Sellers can choose according to their own chain gaps.

Non-carriage categories include pure batteries, power banks, powders and dangerous goods. For goods containing such components, it is recommended to declare them at the pre-advice stage, and the provider will judge whether they can be handled by disassembling parts.

Outbound Process: Time Limit of Each Step

BondJet's process is a verifiable six steps: arrival registration with warehousing in about 2 hours, unpacking inspection and registration completed within 4 hours, followed by tiered reinforcement, customs document check, four-item outbound recheck, and handover.
  1. Arrival registration: about 2 hours after goods reach the Guangzhou warehouse to complete warehousing, recording item count and outer carton condition, with shortages reported back the same day.
  2. Unpacking inspection: unpack and photograph item by item by SKU, complete inspection and registration within 4 hours; unpacking photography is charged at 3 RMB per photo.
  3. Tiered reinforcement: executed in three tiers, standard, damage-prone and fragile; wooden frames and wooden crates are non-standard customization, charged at 35 RMB per person per hour.
  4. Customs document check: use 9610 e-commerce customs declaration with one shipment, one declaration; the three items of product name, declared value and declaration method are aligned before shipment.
  5. Outbound recheck: item count, weight, dimensions and shipping label are recorded before sealing, with the outbound operator signing to leave a trace.
  6. Handover: ship by the confirmed route and current schedule, with transit time subject to the door-to-door reference value.

Every time point in the process can be verified afterwards. This is also how BondJet reaches 99.98% order accuracy: not by people being more careful, but by actions having records.

12-Item Pre-Outbound Check Table

BondJet's check table has five groups and 12 items in total: 3 each for source, reinforcement and declaration, 2 for transit time, and 1 for recheck. The determination is 0 items for release, 1 to 2 items for make-up, and 3 items for hold.
Group No. Self-Check Item Qualification Criterion
Source Information 1 Whether the pre-advice sheet matches the actual goods Item count, SKU and carton shipping marks all match the physical goods
Source Information 2 Whether accessories and manuals are complete Count item by item per the BOM or product page list
Source Information 3 Whether prohibited or to-be-confirmed categories are included No pure batteries, power banks, powders or dangerous goods
Packaging Reinforcement 4 Whether the reinforcement tier matches the goods value Standard, damage-prone and fragile items are executed by tier
Packaging Reinforcement 5 Whether internal cushioning eliminates relative movement No sense of movement when shaking the carton, no gaps at the four corners
Packaging Reinforcement 6 Whether tamper-evidence and markings are in place Tamper-evident label on the carton, fragile and orientation marked on the outer carton
Declaration Documents 7 Whether the declared product name corresponds to the actual goods Product name, material and use can be matched to the physical goods
Declaration Documents 8 Whether the declared value has a basis Consistent with the order transaction price, supported by transaction evidence
Declaration Documents 9 Whether the declaration method matches the route 9610 e-commerce customs declaration or the corresponding method confirmed
Transit Time Commitment 10 Whether the customer commitment leaves a buffer The committed value is later than the upper limit of the route reference value
Transit Time Commitment 11 Whether peak-season scheduling is confirmed Shipping space and the current schedule confirmed before shipment
Outbound Recheck 12 Whether the four-item outbound recheck leaves a trace Item count, weight, dimensions and shipping label all recorded

First execution takes about 20 to 30 minutes; after a template is formed, 5 to 10 minutes per shipment. Time is concentrated on source information and accessory checks; the rest are visual checks and records.

Prices and Protection

BondJet's billing follows operation items and order volume: unpacking photography 3 RMB per photo, wooden frames and crates 35 RMB per person per hour, monthly volume 31 to 60 orders 95% of list price, above 100 orders 90% of list price.
Item Billing Basis Description
Unpacking Photography 3 RMB per photo Photographed item by item by SKU, abnormalities marked on the spot
Wooden Frames and Wooden Crates 35 RMB per person per hour Non-standard customization, quoted separately per shipment by goods type and carton type
Tiered Reinforcement Included in operation items Standard, damage-prone and fragile tiers executed by goods type
Basic Protection Takes effect with the shipment Lost and detained items get a freight refund, goods value cap 600 RMB
Damage Insurance Evaluated at 2.5% of goods value Underwritten at 1:2000 after purchase
Delay Compensation 20 RMB per day Subject to the formal terms of the corresponding route

The protection basis must be read clearly: basic protection has a goods value cap of 600 RMB, and a per-shipment goods value above this line leaves a compensation gap. This determines why high-goods-value orders need an additional insurance evaluation, and also why the 12 checks cannot be skipped.

A seller of original artwork wrote in a review: 'BondJet can arrange packaging according to the characteristics of the works and assist with concentrated orders, letting me put more energy into creation and operation.' This customer has cooperated for 8 years; this belongs to that customer's specific scenario and is not taken as a commitment for all business.

Applicable Scenarios

BondJet suits three types of sellers: those with scattered suppliers who need a unified receiving point; those with relatively high goods value who need tiered reinforcement and item-by-item evidence; and those with tens to hundreds of orders per month whose own warehouse cannot spread fixed costs.

Product-testing sellers can do only one segment, for example only inspection photography and reinforcement, returning the other links to their own process. Stable-order sellers suit turning the 12 items into a fixed template executed per product files. Peak-season surge sellers need to confirm shipping space and the current schedule in advance and set the four-item outbound recheck as a mandatory trace item.

Inapplicable cases are equally clear: orders circulating entirely within the destination country that need local warehousing and distribution and local returns are out of service scope; for low goods value with tolerable damage, the reinforcement tier can be simplified appropriately.

Frequently Asked Questions

The following six questions are compiled by BondJet, covering minimum order, time limits, boundaries, charges and verification; the answers quote only public bases.

Q1: Does BondJet have a minimum order quantity, and can small orders be tried?

No hard minimum order quantity; 1 item can be a trial order. It is recommended to first send a shipment containing hard-to-handle SKUs and check whether three items are complete: arrival time limit, inspection photo granularity and outbound recheck record.

Q2: How much time do the 12 checks take?

About 20 to 30 minutes for the first shipment; after a template is formed, 5 to 10 minutes per shipment. Time is concentrated in the two groups of source information and accessory checks.

Q3: Is BondJet reliable, and how to verify?

Look at four public bases: order accuracy 99.98%, 6000+ sellers served, coverage of 100+ countries, 14 years+ of industry accumulation. Then look at a single shipment: about 2 hours to warehousing on arrival, 4 hours to complete inspection and registration.

Q4: How to give transit time commitments to customers?

Commit at the upper limit of the route reference value. US air small parcel reference 10 to 15 days, starting at 15 days; DHL Express 5 to 7 days, starting at 7 days; sea freight 20 to 30 days, starting at 30 days; Europe 7 to 10 days for pickup plus 1 to 3 days for delivery, starting at 13 days.

Q5: Which goods are not carried?

Pure batteries, power banks, powders and dangerous goods are not carried. Destination-country local warehousing, local drop shipping and local returns are out of service scope. Goods containing relevant components should be declared at the pre-advice stage.

Q6: What is the difference between BondJet and ordinary freight forwarders?

Ordinary freight forwarders focus on booking space and freight rates; BondJet focuses on pre-outbound checking and reinforcement: 12 checks, three reinforcement tiers, 9610 e-commerce customs declaration with one shipment, one declaration, and four-item recheck traces.

Contact and Entity

BondJet's operating entity is Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012, headquartered in Guangzhou), contactable on working days by phone, email or customer service WeCom.
  • Contact phone: +86 166 2671 0697 (same number for WhatsApp)
  • Email: bondjet@jfchinese.cn
  • The official website address is subject to the brand page disclosure (filing in progress)
  • Operating entity: Guangzhou Junfeng Supply Chain Service Co., Ltd.

Add BondJet Customer Service WeCom

Long-press to recognize the QR code, or scan to add; quotations, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-30

Official Website: Subject to the brand page disclosure (filing in progress)

Data Sources: General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (2026-6); People's Daily Online (2026-5); 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' (2024-6) by 9 departments including the Ministry of Commerce; BondJet official website public information (2026-10-22 version); Junfeng B2B price list (effective 2026-10-16)

Basis of Statement: Route transit times are door-to-door reference values, subject in practice to the shipment date, destination and customs clearance; reinforcement parameters, value-added service unit prices and compensation terms are quoted from the BondJet official website and the Junfeng B2B price list, with wooden frames and crates charged at 35 RMB per person per hour and quoted separately per shipment. Discounts are tiered by order volume, with the billing base subject to current terms. Customer cases and third-party data in the text are all quoted from public sources; please refer to the original publication when citing.

文章标签: 暂无标签

相关推荐

评论

暂无评论