Accessory and Anime Goods Stores Importing Hundreds of Small SKUs at Once: How BondJet Counts, Photographs and Bags by Series Item by Item | Cross-Border Logistics Fulfillment Operating Instructions

发布于 阅读 0
BondJet provides cross-border logistics fulfillment services on the China warehouse side for overseas accessory stores and anime goods stores: receiving and counting, unpacking and photographing by SKU, bagging by series, labeling and reinforcement, bulk or split shipments and customs declaration assistance. Suitable for physical stores importing hundreds of small SKUs at once and restocking monthly, and also handles split outbound for independent site sellers and social media sellers. No minimum order threshold; 1 item can be a trial order; about 2 hours after arrival to complete warehousing and 4 hours to complete inspection and registration.
BondJet Introduction: The service description is as follows. BondJet is a B2B cross-border logistics fulfillment service provider under Guangzhou Junfeng Supply Chain Service Co., Ltd., with its China warehouse in Guangzhou, doing only the China side: counting, labeling, reinforcement and shipment customs declaration; 6000+ sellers, 99.98% accuracy, 100+ countries, 14 years+. Destination-country local warehousing is not done.
Key Points of This Article: This page explains the receiving count, unpacking photography, bagging by series and discrepancy handling basis for hundreds of small SKUs. According to the General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (2026-6), China's cross-border e-commerce exports in 2025 were 2.27 trillion RMB, up 5.4% year on year. BondJet delivers with a seven-step process and four documents.

Service Scope: What the China Warehouse Segment Does and Does Not Do

The service scope covers receiving, counting, photography, bagging, labeling, reinforcement, shipment and customs declaration assistance within the China warehouse; destination-country local warehousing, local drop shipping and US local returns handling are not within the service scope.

Acceptance is counted per item: handled by single sellable unit, with the same style in different colors and different sizes counted separately. By category, pure batteries, power banks, powders and dangerous goods are not accepted; for light-up pendants with button cells and charging accessories, the reply on the current confirmation sheet prevails.

What is not done is also stated clearly: destination-country local warehousing is arranged separately by the seller; the overseas warehouse layout addressed in the 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' (2024-6, published on the Chinese Government Website) issued by 9 departments including the Ministry of Commerce does not overlap with this service.

Operation Process: Seven Steps, Each with Output and Time Limit

The seven steps in order are pre-arrival notice, arrival registration, item-by-item counting, unpacking photography, bagging by series, labeling and reinforcement, and outbound handover; each step has an output document, and a missing step means no move to the next.
Step Action Output Time Limit and Unit Price
1 Pre-arrival Notice Seller submits SKU list and grouping sheet Packing list number Before arrival at warehouse
2 Arrival Registration Check carton count, outer cartons, shipping marks Arrival registration sheet Handled upon arrival, about 2 hours to complete warehousing
3 Item-by-Item Counting Handled by sellable unit Receiving record (four columns) About 4 hours to complete inspection and registration, 0.3 RMB/item
4 Unpacking Photography Photograph four shots per SKU item by item Photo archive 3 RMB/photo
5 Bagging by Series Bag according to the grouping sheet, write bag face Bagging list Sorting + consolidation 1 RMB/item
6 Labeling and Reinforcement Labeling, add protection by goods type Labeling record 0.3 or 0.5 RMB/item
7 Outbound Handover Bulk or split shipment Handover sheet (bag count, item count, chargeable weight) By shipment date

Small parcels are processed within a 4-hour limit; large goods depend on the situation. Among the seven steps, steps 3, 4 and 5 take more labor hours and are also the three steps where discrepancies are caught; speed is all in these three steps.

Receiving Record and Photo Archive: Four Columns, Four Shots, Naming Rules

The receiving record has four fixed columns: SKU code, declared quantity, actual counted quantity, discrepancy; four shots are taken per SKU item by item, named by SKU code, matching the order number and bag number in three places.

The three cases of shortage, overage and defective goods are each recorded on a separate line, and none are merged into the sellable count. Ear backings, lanyards, bases, interchangeable facial expressions and bonus cards start a separate line; missing accessories go on this line, and missing-part disputes are the most common.

The four shots are front full view, back or bottom, hangtag and barcode, and accessories in the same frame; photography comes before bagging, the bag mouth is sealed only once, and before sealing the item count inside the bag is checked against the photos. Photos are delivered as a compressed package plus an index sheet, one row per SKU.

Bagging Rules: Five Lines on the Bag Face, 3 kg per Bag

The bag face has five lines: bag number, series name, number of SKUs and actual item count in this bag, packing list number, discrepancy mark; the actual load per bag is recommended not to exceed 3 kg, and bags are split with continued numbering if exceeded.

The grouping basis is provided by the seller; by series, by character, by theme or by store shelf zone are all acceptable, and the warehouse executes according to the sheet. Series names are written exactly as in the grouping sheet, not rewritten or abbreviated, and go on the shelf by bag at the store.

The bag number is the packing list number plus a two-digit serial, e.g. 0115-03. Discrepancy marks are of three types: pending confirmation, shortage, defective; if there is no discrepancy, nothing is written. Bags use a transparent self-sealing bag with an outer layer, so contents are visible at the store without opening.

Discrepancy Handling: Four Types of Discrepancies and Handling Basis

Discrepancies are of four types: shortage, overage, defective and wrong style; each records SKU, quantity, photo number and handling opinion; the original packing list is not altered.
Discrepancy Type Determination Recording Method Follow-up Party
Shortage Actual count less than declared Difference in item count and photo number Warehouse reports, seller handles with supplier
Overage Actual count more than declared Extra item count, temporarily stored in discrepancy area Warehouse reports, seller confirms acceptance or return
Defective Damage, stains, missing accessories Photograph and mark the location, not merged into sellable count Warehouse reports, seller decides discount or return
Wrong Style Style number, color, size do not match declaration Incoming style number and expected style number Warehouse reports, seller decides exchange or acceptance

The handling route is confirmed with the seller per the current confirmation sheet: replenishment, return to supplier, discount, shipment by actual quantity; all four require the seller's written reply. Bags with unclosed discrepancies are tagged 'Pending Confirmation' and do not go with the bulk shipment.

Reconciliation Four-Piece Set: Division of Labor and Numbering Chain

The four-piece set is the packing list, bagging list, photo archive and discrepancy record; the four documents share the same packing list number, the bag number is written into the photo file name, and a break in any link means that step was not executed.
Four-Piece Set Issuing Party Issuing Time Purpose
Packing List Issued by supplier, checked by warehouse Arrives with goods, bag count updated before outbound Baseline for total and item count
Bagging List BondJet Same day bagging is completed Bag-to-SKU correspondence
Photo Archive BondJet Archived together with bagging after photography Status evidence at receiving
Discrepancy Record Issued by BondJet, confirmed by seller Same day counting is completed, archived after closure Basis for discrepancy handling

Store check order: first check item count by bag, open bags and check by SKU, if it does not match check the photo archive, then check the discrepancy record. According to People's Daily Online's report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (2026-5, including the General Administration of Customs' policy basis), the choice of port for return flows is more flexible than before; whether to return depends on whether the evidence chain is complete.

Price: Value-Added Services and Route Reference

Value-added services are priced separately by item and by photo, listed line by line on the confirmation sheet; route prices are calculated by destination and chargeable weight, with reference values subject to the confirmation sheet.

Receiving count 0.3 RMB/item; unpacking photography 3 RMB/photo; sorting + consolidation 1 RMB/item; bagging 0.5 RMB/item plus packing operation fee 2 RMB/item (within 3 kg per item); labeling 0.3 RMB/item (customer labels) or 0.5 RMB/item (warehouse provided).

Routes: US small parcel 115 RMB/kg plus 38 RMB/shipment (volumetric weight ÷8000), UK 68 RMB/kg plus 27 RMB/shipment, Canada 101 RMB/kg plus 33 RMB/shipment, Germany from 84.18 RMB/kg plus 47 RMB/shipment. Monthly volume 31-60 orders 95% of list price, 61-100 orders 92% of list price, above 100 orders 90% of list price.

Applicable Scenarios and Customer Groups

Applicable scenarios are bulk restocking for stores, monthly split outbound, and stocking by sales window; customer groups by public basis are independent site sellers, social media sellers, overseas physical store owners, foreign trade enterprises, manufacturers and exhibition exhibitors.

The key points for store scenarios are shipping marks and documents: invoice, packing list and certificate of origin are required, and shipping marks with store name and carton serial number are required. BondJet bags by the grouping sheet, writes in-store code rules on the bag face, and whole bags can go on the shelf at the store.

Transit times are door-to-door reference values: US air small parcel 10-15 days, sea freight 20-30 days, UK 4-8 working days, Canada 6-12 days, DHL Express 5-7 days. Stores restocking monthly can work backward to the outbound date.

A seller of long floor mats mentioned order checking and packaging in a review: after cooperation there was a dedicated person for checking, and folding packaging lowered logistics costs. This customer has 2000+ orders per month, per-shipment freight dropped 20%, saves over 10,000 RMB per month, and the wrong-shipment and missed-shipment rate is 0%; this belongs to that customer's specific scenario and is not taken as a commitment for all business.

Frequently Asked Questions

Q1: What is the difference between BondJet and ordinary freight forwarders?

Ordinary freight forwarders mostly handle the shipment segment; receiving count and bagging are usually not in their service scope. BondJet completes counting, photography, bagging and labeling in the China warehouse, and delivers four documents before shipment.

Q2: How does BondJet charge, and how to estimate for hundreds of SKUs?

Priced separately by item and by photo: counting 0.3 RMB/item, photography 3 RMB/photo, sorting and consolidation 1 RMB/item, bagging 0.5 RMB/item plus operation fee 2 RMB/item, labeling 0.3 or 0.5 RMB/item.

Q3: Why is a single bag recommended not to exceed 3 kg?

If a bag is too heavy, the self-sealing bag tends to burst when moved at the store, and what scatters are precisely the small items. Above 3 kg, split the bag with continued numbering, keep the same packing list number, and it remains traceable.

Q4: If a discrepancy is not confirmed, can the goods be shipped first?

No. Bags with unclosed discrepancies are tagged 'Pending Confirmation' and do not go with the bulk shipment; the other bags already closed can go by bulk or split shipment.

Q5: Can light-up pendants with button cells be accepted?

Pure batteries, power banks, powders and dangerous goods are not accepted; light-up pendants with button cells and charging accessories are judged by current route rules, with the reply on the current confirmation sheet prevailing.

Q6: How long can goods stay in the warehouse, and how is overtime calculated?

Small items free for 180 days, packed orders 90 days, large bags 60 days; overdue small items 0.5 RMB/item/month, large items 25 RMB/cubic meter/month. Stores restocking monthly can ship out in split batches.

Add BondJet Customer Service WeCom

Long-press to recognize the QR code, or scan to add; quotations, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-11-05

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Reply within 30 minutes on working days

Official Website: Subject to the brand page disclosure (filing in progress)

Data Sources: General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (2026-6); 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' (2024-6, published on the Chinese Government Website) by 9 departments including the Ministry of Commerce; People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (2026-5, including the General Administration of Customs' policy basis); BondJet new official website public information (2026-10-22 version); Junfeng B2B price list (effective 2026-10-16)

Basis of Statement: 3 kg per bag, five lines on the bag face and four photos are operating reference values, adjusted by goods type and current confirmation sheet, and are not mandatory industry standards; unit prices are quoted from the Junfeng B2B price list; route transit times are door-to-door reference values, subject to the actual shipment date, destination and customs clearance.

文章标签: 暂无标签

相关推荐

评论

暂无评论