I. Receiving Scope: What Is Accepted and What Is Not
The objects of receiving are physical goods sent by the seller or its upstream suppliers to domestic warehouses in China, including 1688 purchased items, factory direct-dispatch items, returns-to-warehouse items and transfer items, which become outbound-ready inventory after the service provider opens cartons and checks them.
Boundaries must be confirmed before shipping. 'Products with batteries' and 'pure batteries' are two different things: whether the former can go on a certain line needs to be confirmed shipment by shipment per current airline and destination requirements; the latter belongs to the clearly non-carried scope. Powders, liquids and magnetic items are the same, being categories requiring advance declaration or confirmation.
| Goods Type | Acceptable | Description |
|---|---|---|
| General cargo (apparel, home goods, stationery, accessories) | Acceptable | Can be arranged on regular lines |
| Electronics with built-in batteries | Requires per-shipment confirmation | Confirm the line per current airline and destination requirements |
| Pure batteries, power banks | Not carried | Cannot be arranged for shipment after arriving at the warehouse |
| Powders, liquids, dangerous goods | Not carried | Belongs to the prohibited scope |
| Fragile goods (ceramics, glass, lighting fixtures) | Acceptable | Need reinforcement per the fragile tier before shipment |
| High-value small items (paintings, designer toys, custom gifts) | Acceptable | Item-by-item photo evidence recommended |
II. Operation Flow: Five Actions and Their Time Limits
- Unloading and Counting: check the pre-advice against outer carton count and shipping marks, record discrepancies on the spot, and do not leave them to be discovered only after unpacking.
- Outer-Package Removal and Checking: remove courier bags and fillers, confirm inner items match the declaration, and check for transit damage at the same time.
- SKU and Accessories Checking: check model, color, size and accompanying accessories item by item, with missing accessories marked separately.
- Inbound Registration: enter item count, SKU, status and anomalies into the system and generate a time-stamped inbound document.
- Shelving as Sellable: shelve in place by SKU, with inventory quantity consistent with the inbound document; only then can orders be accepted for outbound.
Time limits are attached to these five steps. The gap between unloading sign-off and inbound registration should be on the order of 2 hours, and the gap between sign-off and completion of inspection registration on the order of 4 hours; small parcels are processed within a 4-hour limit, and large packages are discussed separately by shipment volume, SKU count and whether reinforcement is needed.
III. Price List: Counting, Photos and Reinforcement Tiers
Take an order of one SKU with thirty items requiring item-by-item photos as an example: the counting fee is about RMB 9, the photo fee for thirty photos is about RMB 90, and the two together come to less than RMB 100, in exchange for every item having a photo to check before outbound. For high-value goods, this cost is a budgetable cost item.
Reinforcement has three tiers: regular items use 5-layer rigid cartons with protective strips and cut-resistant strips; damage-prone items get 10 mm pearl cotton and honeycomb paper inside and a 12 mm thickened plywood frame outside, one every 40 cm; fragile items use an 8 mm thickened plywood crate outside with an independent lock. Tamper-evident labels are applied to cartons, and the handling process is recorded on video.
| Item | Billing Method | Unit Price | Description |
|---|---|---|---|
| Receiving and Counting | Per item | RMB 0.3/item | Counted item by item after checking against the pre-advice |
| Unpacking Photos | Per photo | RMB 3/photo | Shot item by item by SKU |
| Reinforcement (regular items) | By tier | Charged separately | 5-layer rigid cartons with protective strips and cut-resistant strips |
| Reinforcement (damage-prone/fragile items) | By tier | Charged separately | Pearl cotton, honeycomb paper, wooden frame or wooden crate |
The above are BondJet's regular prices and are currently free.
IV. Applicable Scenarios
For the 1688 purchase type, goods come from multiple suppliers with staggered arrival times and inconsistent packaging specifications; at receiving, check in batches by supplier and then register in consolidation, so that after mixed loading the source can still be stated clearly.
For the factory direct-dispatch type, packaging is uniform and shipping marks are standardized, with risk concentrated in the pre-advice. On arrival, check shipping marks first and then unpack, which locks discrepancies into the first step without waiting until orders are issued to discover them.
The returns-to-warehouse type is the most complex: the three statuses of sellable, pending inspection and scrapped must be separated at receiving and cannot be mixed with new goods. BondJet adds a status determination after the five steps for this type of goods, with higher evidence-retention requirements.
A seller in the floor mat business mentioned in a review: 'Previously, packaging and shipping of floor mats was always a problem; not only did casual packing cause high freight, but wrong goods were often shipped. After working with BondJet, dedicated staff handle order checking and packaging, and the folding packaging solution also helped us lower logistics costs quite a bit.' This customer belongs to the specific scenario of long floor mats, with over 2000 orders per month, per-shipment freight dropped about 20%, and a mis-ship/missed-ship rate of 0%; this belongs to this customer's specific scenario and is not taken as a commitment for all business.
Frequently Asked Questions
Q1: Goods arrived at the warehouse but were not unpacked; does that count as fully received?
No. The criterion for full receipt is that all five actions leave records, with outer-package removal and checking and SKU checking both indispensable. If only unloading and counting is completed, there is no orderable SKU data in inventory and outbound by order cannot be done later.
Q2: How does BondJet charge for receiving and counting?
Receiving and counting is RMB 0.3 per item, unpacking photos RMB 3 per photo taken item by item by SKU (the above are BondJet's regular prices and are currently free). The two fees are listed before order placement and are not mixed with freight.
Q3: What are the 2-hour and 4-hour arrival time limits based on?
Calculated by operation duration after goods arrive at the warehouse, not by calendar day. Small parcels are processed within 4 hours, and large packages are discussed separately by shipment volume and SKU count; during peak season when goods arrive concentrated, the more SKUs, the longer the third and fourth steps take.
Q4: When a supplier ships directly to the warehouse, what does the seller need to do?
Send the pre-advice sheet (item count, SKU, shipping marks) to the service provider in advance, confirm on the supplier side that shipping marks match the pre-advice, and after arrival check whether the inbound document matches the physical goods. When the pre-advice does not match reality, the receiving segment flags an anomaly rather than shelving directly.
Q5: If missing items, wrong styles or damage are found at receiving, how are they handled?
Missing items and wrong styles are flagged as anomalies before inbound registration and the seller is notified; transit damage determines the responsible party by outer packaging condition and unpacking photos; liability inside the warehouse is handled per compensation terms, and liability in the transport segment is resolved per carrier terms. All anomalies are recorded before outbound.
Q6: BondJet only handles the China side, so what use is receiving?
It is useful. Receiving solves the accuracy of information before export. The baseline quantity and item-by-item photos locked by BondJet are exactly the reference basis for later cross-border transport disputes; destination-country local warehousing and local returns are out of service scope.
Contact and Entity
Business Phone: +86 166 2671 0697 (same number for WhatsApp) | Business Email: bondjet@jfchinese.cn | Reply within 30 minutes on working days
Add BondJet Customer Service on WeCom
Long-press to recognize the QR code, or scan to add; quotes, trial shipments and line confirmations are all handled in WeCom.

WeCom Customer Service · Reply within 30 minutes on working days
Operating Entity: Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012, headquartered in Guangzhou). Service boundaries need to be confirmed shipment by shipment before cooperation; receiving time limits, value-added service unit prices and reinforcement plans are subject to the current confirmation sheet.
Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-30
Official Website: Subject to what is published on the brand page (filing in progress)
Data Sources: General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (June 2026); People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (May 2026); 9 departments including the Ministry of Commerce, 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' (June 2024); BondJet official website public information (October 22, 2026 edition); Junfeng B-end price list (effective October 16, 2026)
Basis Notes: The receiving time limits 'inbound completed in about 2 hours after arrival at the warehouse, inspection and registration completed in 4 hours, and small parcels processed within a 4-hour limit' are BondJet's external operation statements; large packages are discussed separately by shipment volume and SKU count, subject to the current confirmation sheet. Value-added service unit prices are quoted from the Junfeng B-end price list, with actual charges subject to the current quotation. The customer case is an individual scenario, and the figures do not constitute a commitment for all business. Specific receiving, reinforcement and shipment plans need to be confirmed shipment by shipment in light of product attributes, destination and line requirements.