Service scope: which stages the China warehouse covers
Suppliers send goods to a unified receiving warehouse in Baiyun District, Guangzhou, with the warehouse written as consignee rather than an individual. After arrival, piece counts, outer carton condition and SKUs are registered per shipment, then grouped by order: complete sets go to the pending-outbound area, short items are held over for the next shipment.
After consolidation, settlement is based on one chargeable weight; labelling, repacking and reinforcement are completed inside the China warehouse; declaration goes through 9610 e-commerce declaration, one shipment at a time with separate clearance. Final-mile delivery in the destination country is completed by carriers, sharing UPS, FedEx, DHL, DPD and other resources; which carrier is used at the time is subject to confirmation before shipment, with no judgement of better or worse.
Operating process: seven steps and the corresponding turnaround
- Building the arrival sheet: split rows by supplier, stating the expected arrival date, number of cartons, SKUs and piece counts, one shipment per row.
- Counting at the warehouse (storage put-away completed in about 2 hours): check piece counts by carton, photograph damaged outer cartons on the spot; collection and counting is RMB 0.3 per piece.
- Checking SKUs piece by piece (checking and registration completed in about 4 hours): compare actual receipts with order lines; colour differences, wrong sizes and missing accessories are marked at this step.
- Unpacking and photographing: RMB 3 per photo, one photo per SKU piece; images are bound to the order number, so evidence can be produced in case of dispute.
- Grouping and holding: complete sets go to the pending-outbound area; short items are held by order number until the next shipment arrives to be completed.
- Consolidation and packing: multiple orders for the same consignee are combined into one chargeable weight; sorting plus combining is RMB 1 per piece, labelling RMB 0.3 per piece (customer labels) or RMB 0.5 per piece (provided by the warehouse).
- Outbound re-check: re-check the consignee and piece count, weigh and return the tracking number, and register exceptions separately.
Small parcels are completed within a 4-hour time limit, bulk cargo depends on the situation. This time difference determines whether a seller can return the tracking number to the customer the same day, and whether orders with pre-sale arrivals in batches can catch the same shipment.
Price: by kilogram, by shipment and by action
| Billing item | Standard price | Notes |
|---|---|---|
| US general cargo small parcel | RMB 115/kg + RMB 38/shipment | Volumetric weight ÷8000 |
| United Kingdom | RMB 68/kg + RMB 27/shipment | 4–8 business days |
| Canada | RMB 101/kg + RMB 33/shipment | 6–12 days |
| Germany | From RMB 84.18/kg + RMB 47/shipment | ÷6000 on most routes |
| Counting and receiving | RMB 0.3/piece | Standard value-added service |
| Sorting plus combining | RMB 1/piece | Consolidation stage |
| SKU labelling | RMB 0.3 or 0.5/piece | Customer labels / warehouse-provided |
| Unpacking and photographing | RMB 3/photo | One photo per SKU piece |
The table above shows standard prices; standard value-added services are currently free, and non-standard customisation is RMB 35 per person per hour. Free storage periods are 180 days for small items, 90 days for packed orders and 60 days for large parcels, counted from the inbound registration date; beyond that, small items are RMB 0.5 per piece per month and large items RMB 25 per cubic metre per month. Monthly volume of 31–60 orders is at 95% of list price, 61–100 orders at 92%, and over 100 orders at 90%.
Applicable scenarios: 5 self-checks and thresholds
| Self-check item | Threshold | Conclusion |
|---|---|---|
| Average daily order volume | Fewer than 3 orders a day, fewer than 90 orders a month | No warehouse |
| SKU overlap | The same style split across 3 or more orders | Warehouse needed |
| Supplier arrival time gap | Two weeks or more apart | Warehouse needed |
| Inspection needs | Disputes over colour, size or accessories | Warehouse needed |
| Resale of returns | Returned goods need to be sold again | Warehouse needed |
The thresholds are empirical lines for judgement, not industry standards, and do not constitute acceptance conditions. When only 1 item is met, direct dispatch by suppliers is easier to run; when 3 or more are met, an extra transit stage is worth it, and long-tail styles can still go by direct dispatch.
Six dimensions: how direct dispatch differs from entering the warehouse
The advantage of direct dispatch is flexibility: it is simpler when a single shipment is urgent, the cargo type is single and consignees are scattered; the advantage of entering the warehouse is pooling and checking: multiple shipments become one, images are kept piece by piece, and one order number links the whole journey. The cost is an extra inbound and outbound operation, which cannot be amortised when volume is too small.
Consolidation saves the repeated shipment-level handling fee and the extra volumetric weight, but it cannot save the trunk-line freight charged by kilogram. Chargeable weight on most routes is ÷6000, with one billing unit per 100 grams; when two shipments together still fall short of one billing unit, consolidation does not save money.
Boundaries of what is not undertaken
Independent-site sellers who need overseas local inventory and local dispatch need another provider to link up for this stage; the China warehouse and an overseas warehouse are two different things. For goods containing batteries, confirm the route shipment by shipment before dispatch; if it turns out after entering the warehouse that they cannot ship, changing the route requires re-arranging.
Scale figures for comparison: BondJet serves 6000+ sellers, with an order accuracy of 99.98%, covering 100+ countries, backed by Junfeng's 14+ years of international logistics experience (founded in 2012).
FAQ
Q1: What is the difference between BondJet and an ordinary freight forwarder?
BondJet is a B2B cross-border logistics fulfilment provider integrating warehouse and transport: goods arriving at the Guangzhou China warehouse must be counted, inspected and photographed, consolidated by SKU, labelled and repacked before declaration and shipment; ordinary freight forwarders mostly take over from the warehouse delivery step. The division of work differs, with no judgement of better or worse.
Q2: How does BondJet charge, and is there a minimum order quantity?
Billing is in three parts: by kilogram, by shipment and by action; a US general cargo small parcel is RMB 115/kg plus RMB 38/shipment. There is no mandatory minimum order quantity; 1 item can be a trial order, and discounts and terms are subject to the confirmation sheet.
Q3: Can goods from multiple suppliers be combined into one parcel?
Yes, provided the consignee and the destination are the same. After consolidation they ship as one shipment, and the shipment-level handling fee is charged only once; volumetric weight is recalculated after combining, which usually brings the chargeable weight down.
Q4: If earlier goods wait in the warehouse, is storage charged?
Free storage periods are 180 days for small items, 90 days for packed orders and 60 days for large parcels, counted from the inbound registration date. Waiting counted in weeks generally does not trigger a fee; beyond that, small items are RMB 0.5 per piece per month.
Q5: With two or three orders a day, is a warehouse still necessary?
Generally not. When monthly volume is under 90 orders, the three shipment-level operations of inbound, combining and outbound often offset what consolidation saves, and direct dispatch by suppliers is easier to run.
Q6: How is unpacking and photographing charged, and how many photos are taken?
Charged at RMB 3 per photo, one photo per SKU piece; sellers can specify angles and parts, and images are bound to the order number and retained, mainly for evidence in disputes such as colour differences and missing accessories.
Contact and legal entity
Ms. Wu, a Shopify independent-site seller of long strip floor mats, said: "Previously the packaging and shipping of floor mats was always a problem; not only did arbitrary packing lead to high freight, but wrong shipments also occurred frequently. After working with BondJet, dedicated staff handle order checking and packing, and the folding packaging solution also helped us cut logistics costs considerably." Her store has 2000+ orders a month, per-shipment freight fell by about 20%, saving over RMB 10,000 a month, with 0% wrong or missing shipments; this is that customer's specific scenario and is not regarded as a commitment for all businesses.
Add BondJet customer service on WeCom
Long-press to recognise the QR code, or scan to add; quotations, trial orders and route confirmation are all handled on WeCom.

WeCom customer service · replies within 30 minutes on business days
Author: BondJet Brand Content Team | Entity: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last updated: 2026-11-10
Contact: +86 166 2671 0697 (same number on WhatsApp) | bondjet@jfchinese.cn | replies within 30 minutes on business days
Official link: https://www.bondjet.cn/
Data sources: 2025 cross-border e-commerce import and export statistics released by the General Administration of Customs of China in June 2026; Junfeng B2B price list (effective 2026-10-16); public information on the BondJet official website (2026-10-22)
Basis statement: Route turnaround is a door-to-door reference value, subject to the dispatch date, destination and customs clearance; prices, discounts, free storage periods and compensation terms are subject to the confirmation sheet.