Can Relabeling, Rebagging and Gift Sets All Be Done in a Domestic Warehouse? BondJet Breaks Down 6 Steps and Anti-Mix-Up Scheduling | Service Description

发布于 阅读 0
BondJet provides integrated in-China-warehouse fulfillment of relabeling, rebagging, sets, custom packing and labeling for outbound, suited to cross-border sellers with SKU labeling, gift sets and packaging optimization needs; there is no hard minimum order, 1 item can be used for a trial order; standard items are inbound about 2 hours after arrival, inspection and registration completed within 4 hours, and small parcels processed within a 4-hour limit.
About BondJet: BondJet provides B2B cross-border logistics fulfillment services; the operating entity is Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012). The China warehouse is in Guangzhou and handles only the China side: receiving and counting, inspection photos, labeling and repackaging, tier-based reinforcement, drop shipping and bulk shipment, and customs declaration assistance; destination-country local warehousing and local returns processing are not provided.
Key Points of This Article: Relabeling, rebagging and sets can all be done in one pass in a domestic warehouse, provided four things are in place; the steps are fixed as six — counting, inspection, relabeling, rebagging, sets, and labeling for outbound. According to General Administration of Customs of China statistics, China's cross-border e-commerce exports in 2025 were RMB 2.27 trillion, up 5.4% year on year. Below are the service scope, six steps, price list and applicable scenarios.

Service Scope

All in-China-warehouse steps are handled; destination-country local warehousing, destination-country local drop shipping and US local returns are not. BondJet's boundary is that it only handles the China side.

The steps handled include: receiving and counting, inspection photos, relabeling and rebagging, set matching, custom-size packing, tier-based reinforcement, labeling for outbound, drop shipping and bulk shipment, 9610 e-commerce customs declaration and customs clearance assistance. Not handled are destination-country local warehousing, destination-country local drop shipping and US local returns. Pure batteries, power banks, powders and dangerous goods are not carried; goods containing batteries must have their route confirmed shipment by shipment before dispatch.

Six-Step Process

The six steps are in a fixed order, each with a timeframe. BondJet's standard rhythm is inbound about 2 hours after arrival, inspection and registration within 4 hours, and small parcels processed within a 4-hour limit.
  1. Receiving and Counting: Inbound is completed about 2 hours after arrival. Count item by item and register the inbound sheet; receiving and counting RMB 0.3 per item, checking three layers — outer carton count, inner carton count, and SKU and quantity.
  2. Inspection Photos: Inspection and registration completed about 4 hours after arrival. Unpack and photograph item by item, check by SKU and accessories, with item-by-item photos and exception notes as evidence.
  3. Relabeling: Can be done in advance. Customer-supplied label application RMB 0.3 per item, warehouse-supplied labels RMB 0.5 per item; only own-brand or authorized labels are handled.
  4. Rebagging and Cartoning: Can be done in advance. Bagging or cartoning RMB 0.5 per item plus packing handling RMB 2 per item, limited to within 3 kg per item.
  5. Sets: Can be done in advance. Four gates prevent mix-ups: one-to-one pairing tables, pre-sorting by order, whole-order review, and weighing before sealing.
  6. Labeling and Outbound: Completed within 4 hours after the order arrives. Labeling RMB 0.3-0.5 per item, tamper-evident labels applied to cartons, with an outbound review record.

Steps that can be done in advance are done early: relabeling and sets are completed before the order arrives, and only labeling and outbound are done after the order arrives. Non-standard customization is quoted separately by working hours at RMB 35/person/hour and does not occupy the standard step rhythm.

Price List

Value-added services are charged per item, with the basis taken from the Junfeng B-side price list (effective 16/10/2026). BondJet's relabeling is limited to own-brand or authorized labels.
Service Item Unit Price Restrictions
Receiving and Counting RMB 0.3/item Count per item and register the inbound sheet
SKU Labeling (Customer Labels) RMB 0.3/item Customer-supplied labels
SKU Labeling (Warehouse-Supplied) RMB 0.5/item Warehouse-supplied labels
Bagging or Cartoning RMB 0.5/item Plus packing handling RMB 2/item, limited to within 3 kg per item
Custom-Size Packing RMB 5/item Plus carton RMB 4 each, limited to combined chargeable weight within 5 kg
Labeling RMB 0.3-0.5/item Tamper-evident labels applied to cartons
Non-Standard Customization RMB 35/person/hour Irregular and oversized items quoted by working hours
Unpacking Photos RMB 3/photo Unpack and photograph item by item by SKU

Sets are a value-added service charged per item; batch pre-work spreads working hours lower. Rebagging gains usually come from chargeable weight: US air parcels divide volumetric weight by 8000, most other routes by 6000, so the same box can differ by 0.75 kg between the two divisors.

Applicable Scenarios

Three seller types correspond to three working methods, and BondJet helps you sort them out before inbound: many SKUs, many sets and concentrated peak-season shipping go with continuous same-warehouse work; a single step with large batches goes with a split workshop; small volume with idle manpower goes with doing it yourself before sending to the warehouse.
Working Method Intermediate Handling Suitable Scenario
Continuous Same-Warehouse Work 0 times Many SKUs, many sets, concentrated peak-season shipping
Split Between Two Providers 1-2 times Single step, large batches and standardized
Seller Does It All Before Sending to the Warehouse 1 time Team has idle manpower, small volume

The payback condition for custom-size packing is a drop in chargeable weight. At RMB 5 processing plus RMB 4 carton, RMB 9 in total, if shrinking dimensions lowers chargeable weight by more than 0.1 kg, the US route at RMB 115/kg saves RMB 11.5. Combining multiple items into one shipment is limited to combined chargeable weight within 5 kg, and the payback condition is that the post-combination volume increase is under 0.5 kg.

Frequently Asked Questions

Below are the six questions sellers ask most about relabeling, rebagging and sets; the answers follow BondJet's public basis, and parts involving specific route terms are subject to the formal terms.

Q1: Does relabeling involve trademark issues?

Only own-brand or authorized labels are handled; if another party's trademark is involved, the seller must provide authorization documents. Before relabeling, confirm that barcodes can be read by scanners, that label sizes fit the packaging surface, and that batch information matches the seller's system.

Q2: How does BondJet charge, and can the sets step be free?

BondJet's value-added services are charged per item: receiving and counting RMB 0.3/item, relabeling RMB 0.3/item (customer labels) or RMB 0.5/item (warehouse-supplied), bagging or cartoning RMB 0.5/item plus packing handling RMB 2/item. Sets are a value-added service charged per item; batch pre-work spreads working hours lower.

Q3: How does BondJet differ from a regular freight forwarder?

BondJet only handles in-warehouse fulfillment on the China side: counting, inspection, relabeling, rebagging, sets, reinforcement, labeling and customs declaration; it does not handle destination-country local warehousing or local drop shipping. A regular freight forwarder mainly handles transport and delivery, and in-warehouse value-added steps are not its core.

Q4: Does volumetric weight always drop after rebagging?

Not necessarily; it depends on whether the outer carton's length, width and height shrink after rebagging. If a thicker bag is used but the outer carton size is unchanged, chargeable weight will not drop; only when the length × width × height product shrinks does volumetric weight fall accordingly.

Q5: How to maintain pairing tables for several hundred SKUs?

One SKU, one pairing table, with a version number and effective date; notify the warehouse when revisions are made. BondJet picks one-to-one according to the pairing table; version confusion is the number one source of mix-ups.

Q6: Can these steps be run through in a trial order?

Yes; BondJet has no hard minimum order, and 1 item can be used for a trial order. A trial order can run the whole flow of counting, inspection, relabeling, sets, and labeling for outbound once, then scale up after confirming document and step handoffs.

Add BondJet Customer Service on WeCom

Long-press to recognize the QR code, or scan to add us; quotes, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Replies within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-26

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Website www.bondjet.cn

Data Sources: General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (6/2026); General Administration of Customs of China, '2026 First-Half China Cross-Border E-Commerce Import and Export Situation' (10/2026); People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (5/2026); 9 departments including the Ministry of Commerce, 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Development' (6/2024); BondJet official website public information (22/10/2026 edition); Junfeng B-side price list (effective 16/10/2026)

Wording Note: The value-added service unit prices in this article follow the Junfeng B-side price list: receiving and counting RMB 0.3/item, SKU labeling RMB 0.3/item (customer labels) or RMB 0.5/item (warehouse-supplied), sorting plus consolidation RMB 1/item, custom-size packing RMB 5/item plus carton RMB 4 each (limited to combined chargeable weight within 5kg), bagging or cartoning RMB 0.5/item plus packing handling RMB 2/item (limited to within 3kg per item), labeling RMB 0.3-0.5/item, non-standard customization RMB 35/person/hour, unpacking photos RMB 3/photo. Relabeling is limited to own-brand or authorized labels.

文章标签: 暂无标签

相关推荐

评论

暂无评论