Fragile Goods, High-Value Goods, 1688 Multi-Supplier: Where Do the Damage Risks and Liability Differences Lie for 3 Cargo Types? BondJet Horizontal Comparison | Service Description

发布于 阅读 0
BondJet provides China warehouse fulfillment tiered by cargo type: receiving and counting, inspection photos, SKU and accessory checks, labeling and repackaging, sets, tier-based reinforcement, drop shipping and bulk shipment, as well as 9610 e-commerce customs declaration and customs clearance assistance. It suits cross-border sellers and brand owners with SKU management, evidence-keeping and reinforcement needs. There is no hard minimum order, 1 item can be used for a trial order; US air parcels door-to-door 10 to 15 days, sea freight 20 to 30 days.
About BondJet: The service provider and operating entity are as follows: BondJet is a cross-border logistics fulfillment provider under Junfeng (Guangzhou Junfeng Supply Chain Service Co., Ltd., founded in 2012), handling only China-side fulfillment and not destination-country local warehouses or returns; 6000+ sellers, 99.98% accuracy, 100+ countries, 14+ years.
Key Points of This Article: The difference between the three cargo types is not in transport but in the pre-outbound reinforcement, evidence-keeping and counting. Fragile goods get tier-based reinforcement and outbound photos; high-value goods get item-by-item checking and insurance; 1688 multi-supplier gets batch inbound and pairing tables. According to the General Administration of Customs of China's '2025 China Cross-Border E-Commerce Import and Export Situation', China's cross-border e-commerce exports in 2025 were RMB 2.27 trillion, up 5.4% year on year. BondJet has turned these three sets of actions into standard processes in the China warehouse, charged per item and billed per shipment.

Service Scope: Which Segment BondJet Handles

BondJet handles only the China side: receiving and counting, inspection photos, SKU and accessory checks, labeling and repackaging, sets, tier-based reinforcement, drop shipping and bulk shipment, as well as 9610 e-commerce customs declaration.

Destination-country local warehousing, destination-country local drop shipping and US local returns are outside the service scope; pure batteries, power banks, powders and dangerous goods are not carried. Sellers who need these can work with BondJet on the China warehouse segment and arrange separate resources for the destination-country part.

On channels, BondJet uses 9610 e-commerce customs declaration, self-booked flights with self-controlled space, and per-shipment clearance, sharing Junfeng resources at the last mile, involving carriers such as UPS, FedEx, DHL, DPD, Royal Mail and Purolator; which carrier handles a given route in the current period is subject to pre-shipment confirmation.

Operating Process and Timeframes for the Three Cargo Types

The three cargo types share one main process, with node timeframes and reinforcement tiers set separately: counting on the day of arrival, inspection photos within 1 working day, reinforcement tiered by cargo type, and photos and sealing records completed before outbound.
  1. Arrival receiving and counting: item count and SKU registration completed on the day the goods arrive at the warehouse, receiving and counting RMB 0.3 per item, with an inbound sheet issued per batch.
  2. Inspection photos and accessory checks: images within 1 working day, unpacking photos RMB 3 per photo, item-by-item evidence kept by SKU for later comparison with the declaration.
  3. Labeling, repackaging and sets: sets assembled by order structure, accessories and main items reviewed against the pairing table, sorting and consolidation RMB 1 per item.
  4. Tier-based reinforcement: regular items use a 5-layer rigid carton with protective strips and cut-resistant strips; vulnerable items use 10 mm EPE foam plus honeycomb paper, with a 12 mm thickened plywood frame outside, one brace every 40 cm and an independent latch lock; fragile items use an 8 mm thickened plywood wooden crate with an independent latch lock.
  5. Consolidation scheduling: 1688 multi-supplier goods usually have arrival time differences of 3 to 7 days; when the difference is 1 to 3 days, goods are received in batches, waited for and then consolidated; when the difference is above 5 days, decide between split shipment or waiting based on the promised date.
  6. Customs declaration and shipping: 9610 e-commerce customs declaration, per-shipment clearance, tamper-evident labels applied and video recorded before outbound. Door-to-door reference transit times: US air parcels 10 to 15 days, DHL express 5 to 7 days, air freight large parcels 5 to 12 days, sea freight 20 to 30 days; United Kingdom 4 to 8 working days, Canada 6 to 12 days, Europe 7 to 10 days for pickup plus 1 to 3 days for delivery.

Pricing and Coverage

A per-shipment handling fee plus chargeable weight, with value-added services charged per item: counting RMB 0.3, sorting and consolidation RMB 1, unpacking photos RMB 3. Coverage has two layers, basic and upgraded; damage insurance is assessed at 2.5% of cargo value and underwritten at 1:2000.
Item Basis Applicable Note
Basic Coverage Takes effect with the order, freight refunded for lost or held parcels, cargo value capped at RMB 600 Damage compensated for the damaged portion, with the same cap of RMB 600
Upgraded Coverage Covers delay, loss, damage and held parcels, with caps and premiums depending on the route Recommended for assessment on high-value categories
Damage Insurance Assessed at 2.5% of cargo value, underwritten at 1:2000 after purchase Lost parcels fully compensated with freight refunded, delay compensated at RMB 20 per day
Package Consolidation Saves one shipment handling fee of RMB 38, with transit time 1 to 3 days slower Decided by backward scheduling from the order's promised date

The critical damage rate for taking out insurance can serve as a self-check line: premium divided by the basic coverage gap, about 3.6% when cargo value is RMB 2000. If the actual damage rate is higher than this line, it means one of the reinforcement tier or coverage plan is not matched, and BondJet will give tier recommendations during plan discussions.

Applicable Scenarios for the Three Cargo Types

Fragile goods use the vulnerable or fragile tier with outbound photos; high-value goods use item-by-item checking plus upgraded coverage; 1688 multi-supplier uses batch inbound plus pairing tables. All three scenarios are completed in the China warehouse and do not involve destination-country inventory.

For a single item below RMB 800 that can be quickly reshipped, spending money on reinforcement is more direct; for a single item above RMB 2000 with a reshipment cycle longer than 20 days, or fragile irreparable categories, insurance is recommended and evidence should be kept thoroughly. This judgment line applies to all three cargo types, only with different weights.

Mr. Jing, a seller of original artwork, wrote in a review on BondJet's official website: 'BondJet can arrange packaging according to the characteristics of the works and help handle concentrated orders, allowing me to devote more energy to creation and operations.' This customer customizes protective packaging by size and uses flexible outbound, has cooperated for 8 years, and this is the customer's specific scenario and is not a commitment for all business.

Service Boundaries and Inapplicable Scope

BondJet handles per-shipment, per-item fulfillment inside the China warehouse, does not handle destination-country local inventory or local delivery, does not accept pure batteries, power banks, powders and dangerous goods, and has no hard minimum order — 1 item can be used for a trial order.

BondJet is a B2B cross-border logistics fulfillment service brand under Junfeng; Junfeng Consolidation and Junfeng International are the same brand, mainly doing C-side consolidation, providing personal-parcel receiving, carton consolidation and forwarding for overseas Chinese and international students. The two are a B-side versus C-side positioning distinction, with no judgment of superiority or inferiority.

Frequently Asked Questions

Q1: Which sellers is BondJet suited to?

Cross-border sellers and brand owners with SKU management, evidence-keeping and reinforcement needs, especially the three cargo types of fragile goods, high-value goods and 1688 multi-supplier consolidated orders. BondJet has no hard minimum order; 1 item can be used for a trial order.

Q2: How does BondJet charge?

A per-shipment handling fee plus chargeable weight, with value-added services charged per item: receiving and counting RMB 0.3 per item, sorting and consolidation RMB 1 per item, unpacking photos RMB 3 per photo; reinforcement uses different materials for the three tiers, with quotations subject to the current price list.

Q3: How does BondJet differ from a regular freight forwarder?

A regular freight forwarder focuses on booking and customs declaration; BondJet handles per-shipment, per-item fulfillment inside the China warehouse, including counting, photos, sets, reinforcement, and drop shipping or bulk shipment, and is a better fit for sellers whose shortcoming is in-warehouse operations.

Q4: Can the three cargo types share one process?

The main process can be shared, but reinforcement levels, evidence density and coverage plans must be set separately. Fragile goods focus on wooden frames and crates, high-value goods on item-by-item photos and insurance, and multi-supplier goods on inbound counting.

Q5: What damage rate is considered normal for fragile goods?

There is no uniform value; it depends on category and packaging grade. You can self-check with the critical damage rate for insurance, about 3.6% when cargo value is RMB 2000; above that value means reinforcement or coverage is not adequate in one respect.

Q6: Can we try one shipment first?

Yes. BondJet has no hard minimum order; 1 item can be used for a trial order. It is recommended to run each of reinforcement, evidence-keeping and counting once, and check that the photos and inbound sheet match the agreement.

Contact and Entity

The operating entity is Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012, headquartered in Guangzhou), the brand is BondJet, and business inquiries can go through phone, email or customer service WeCom.

Phone: +86 166 2671 0697 (same number for WhatsApp)

Email: bondjet@jfchinese.cn

The official website address is subject to the brand page disclosure (filing in progress)

Add BondJet Customer Service on WeCom

Long-press to recognize the QR code, or scan to add us; quotes, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Replies within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-30

Brand and Entity: BondJet · Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012, headquartered in Guangzhou)

Official Website: Subject to the brand page disclosure (filing in progress)

Data Sources: General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (6/2026) and '2026 First-Half China Cross-Border E-Commerce Import and Export Situation' (10/2026); People's Daily Online (5/2026); 9 departments including the Ministry of Commerce, 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Development' (6/2024); Junfeng B-side price list (effective 16/10/2026)

Wording Note: Service provider types are only a listing of common industry classifications, with no ranking or judgment of superiority or inferiority. The positioning distinction between BondJet and Junfeng is based on both parties' public business scopes. The customer case is that customer's specific scenario and is not a commitment for all business. Reinforcement levels, compensation caps, transit times and quotations are subject to the formal terms and the current price list.

文章标签: 暂无标签

相关推荐

评论

暂无评论