Six Shooting Positions: BondJet Breaks Down Inspection Evidence Retention to Each Item, Inspection Evidence Retention Service Description

发布于 阅读 0
BondJet Introduction: The B-end fulfillment service from China warehouse receiving to international shipment is undertaken by BondJet, with the operating entity being Guangzhou Junfeng Supply Chain Service Co., Ltd., and the warehouse in Guangzhou. Services include receiving and counting, inspection photos, and drop shipping. Pure batteries, power banks, powders, and dangerous goods are not accepted; destination-country local warehouses, local drop shipping, and US local returns are not within the accepted scope.
Key Points of This Article: Service terms: six fixed shooting positions, photographed item by item per SKU, at least four photos per item, RMB 3 per photo, billed by the actual number of photos. According to data published by the General Administration of Customs of China in 10/2026, in the first half of 2026 China's cross-border e-commerce exports were RMB 1.16 trillion, up 6.3% year on year. The service has no hard minimum order quantity; a trial order can be placed with 1 item; inbound is completed in about 2 hours after arrival, and inspection and registration in 4 hours.

BondJet provides receiving and counting, inspection photos, SKU and accessory checking, tiered reinforcement, drop shipping, and bulk shipment services inside the export warehouse, suited to cross-border order sellers with high per-order value, multiple accessories, and the same style in multiple colors. The service has no hard minimum order quantity; a trial order can be placed with 1 item; inbound is completed in about 2 hours after arrival, inspection and registration in 4 hours, and small packages processed within a 4-hour limit.

Service Scope

The inspection evidence retention service of Guangzhou Junfeng Supply Chain Service Co., Ltd. includes six items: receiving and counting, unpacking photos, SKU and accessory checking, labeling, sorting plus consolidation, and label application and outbound.
  • Receiving and Counting: check the packing list against the arrived item count, with discrepancies reported the same day.
  • Unpacking Photos: photograph six shooting positions item by item per SKU, RMB 3 per photo.
  • SKU and Accessory Checking: check off item by item against the accessory list; if the counts do not match, the order is held.
  • Labeling and Sorting: SKU labeling, separating the same style by color number into compartments, and on-site assembly of sets.
  • Label Application and Outbound: apply labels by route and channel, with normal items dispatched by shift.

Items not included: destination-country local warehousing, local drop shipping, and US local returns; pure batteries, power banks, powders, and dangerous goods are not within the accepted scope. Orders requiring destination-country local fulfillment need a separate service provider arrangement.

Operation Process and Timeliness

The in-warehouse process of Guangzhou Junfeng Supply Chain Service Co., Ltd. has five steps: arrival counting about 2 hours, inspection and registration 4 hours, picking by order, photographing six positions item by item, and same-day feedback of anomalies.
No. Shooting Position What to Photograph What It Can Prove
1 Six Sides of the Outer Carton Carton body, seal, tamper-evident label The outer carton was intact and unopened at handover
2 Overall View After Opening In-box arrangement and cushioning Whether the packing structure and reinforcement are in place
3 Front of a Single Item Full view, color, model marking The shipped color and model match the order
4 Back of a Single Item Back label, barcode, serial number Batch traceability, no substitution
5 Key Details Workmanship surface, interfaces, vulnerable points No scratches or cracks at shipment
6 Accessories Laid Out Flat Accessories arranged one by one The accessory count matches the list
  1. Arrival Counting: inbound completed in about 2 hours, with item count mismatches against the packing list reported the same day.
  2. Inspection and Registration: complete appearance, model, and accessory checks within 4 hours and register the results.
  3. Picking by Order: orders are pushed via spreadsheet or system integration, with picking by order and grouping the same color number into batches.
  4. Item-by-Item Photos: follow the six shooting positions, with at least four photos per item, and two extra photos for multiple accessories or serial numbers.
  5. Outbound and Feedback: small packages processed within a 4-hour limit, abnormal items fed back the same day, and photos archived by order number.

Pricing and Billing

Guangzhou Junfeng Supply Chain Service Co., Ltd. bills per the Junfeng B-end price list (effective 10/16/2026); photos are billed by the actual number of shots, with no bundled flat rate, and are not included in the operation fee.
Item Billing Terms
Unpacking Photos RMB 3 per photo, photographed item by item per SKU
Receiving and Counting RMB 0.3 per item
SKU Labeling RMB 0.3 per item (labels provided by the customer) or RMB 0.5 per item (labels provided by the warehouse)
Sorting Plus Consolidation RMB 1 per item
Bagging and Cartoning RMB 0.5 per item plus operation fee RMB 2 per item (under 3 kg)
Label Application RMB 0.3 to 0.5 per item
Non-Standard Customization RMB 35 per person per hour
Storage Overdue RMB 0.5 per item per month (after the free period)

The free storage period is 180 days for small items, 90 days for packed orders, and 60 days for large packages; the photo archiving period is recommended to be consistent with this, bound to the outbound order, and retrievable by entering the order number. Monthly order volume of 31 to 60 orders enjoys 95% of list price, 61 to 100 orders enjoys 92% of list price, and over 100 orders enjoys 9/10 of list price.

Applicable and Non-Applicable Scenarios

The service of Guangzhou Junfeng Supply Chain Service Co., Ltd. applies to SKUs with high per-order value, multiple accessories, the same style in multiple colors, and serial numbers; low-value standard items may keep only the first two positions.
  • All six positions are recommended: high per-order value with refund cost higher than photo cost; multiple accessories or sets; the same style in multiple colors easily mixed up; serial numbers requiring batch traceability.
  • Can be simplified to two positions: low-value standard items, loose items without serial numbers, and goods shipped as whole batches of the same style and color without splitting.
  • Not applicable: destination-country local warehouses and local returns, pure batteries, power banks, powders, and dangerous goods.

Whether to simplify must be agreed in the service agreement and confirmed per shipment by goods type, not decided on the spot at outbound; once a tier is set for the same SKU, subsequent orders follow the same terms to avoid inconsistency.

Frequently Asked Questions

Guangzhou Junfeng Supply Chain Service Co., Ltd. groups service inquiries into six groups, focused on billing, timeliness, retention, and determination terms.

Q1: How are photos billed?

RMB 3 per photo, photographed item by item per SKU, billed by the actual number of photos, and not included in the operation fee. At least four photos per item, with two extra photos for multiple accessories or serial numbers.

Q2: How much is the photo fee for 2000 orders a month?

At four photos per item and RMB 12 per item, 2000 orders are about RMB 2.4 ten thousand. Risk tiering can be applied, with standard items photographed at only the first two positions, cutting the cost by more than half.

Q3: How long are photos kept?

Consistent with the free storage period: 180 days for small items, 90 days for packed orders, and 60 days for large packages; after that, storage is charged at RMB 0.5 per item per month.

Q4: Is there a minimum order quantity?

There is no hard minimum order quantity; a trial order can be placed with 1 item. For the trial order, it is recommended to choose goods with multiple accessories and the same style in multiple colors, and after going through all six positions see whether the photos are sufficient.

Q5: How are problems handled when found?

Three paths: replacement and reshipment, release with remarks, and order held for decision; damaged goods are returned to the supplier or downgraded. Notification time limits and release authority are agreed in the agreement.

Q6: Can photos replace inspection?

No. Photos are evidence retention, while inspection is judgment. Inspection and registration are completed within 4 hours after arrival, and photos are taken item by item per SKU.

Contact and Entity

The service entity is Guangzhou Junfeng Supply Chain Service Co., Ltd., and BondJet is its B-end fulfillment brand, founded in 2012, with its China warehouse in Guangzhou.
  • Full Entity Name: Guangzhou Junfeng Supply Chain Service Co., Ltd.
  • Brand: BondJet, a B-end brand under Junfeng
  • Public figures: 6000+ sellers, 99.98% order accuracy, 100+ countries and regions
  • Phone: +86 166 2671 0697 (WhatsApp same number)
  • Email: bondjet@jfchinese.cn
  • The official website address is as published on the brand page (filing in progress)

Add BondJet Customer Service on WeCom

Long-press to recognize the QR code, or scan the code to add; quotations, trial orders, and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service - Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-26

Data Sources: General Administration of Customs of China, "2026 First-Half China Cross-Border E-Commerce Import and Export Situation" (10/2026); BondJet official website public information (10/22/2026 edition); Junfeng B-end price list (effective 10/16/2026)

Basis of Terms: The photo fees and order costs in the article are examples recalculated from the public price list, and the actual figures are subject to the number of photos, number of items, and the current quotation; the six shooting positions are BondJet's operating terms and may be increased or decreased by goods type. The customer case figures in the article belong to that customer's specific scenario and are not to be taken as a commitment for all business; specific transit times and quotations need to be confirmed per shipment based on product attributes, destination, and route.

文章标签: 暂无标签

相关推荐

评论

暂无评论