Bulk Restock of Tableware and Packaging Consumables for Chinese Restaurants and Milk Tea Shops: Can Food-Contact Packaging Mix with Vessels? BondJet Sub-Packing and Container Layering Service Notes

发布于 阅读 0
BondJet provides China-side cross-border logistics fulfillment services for owners of overseas physical stores: receiving and counting, box sorting by goods category, tiered reinforcement, applying shipping marks, container loading and shipment, and export customs declaration assistance, suited to local stores such as Chinese restaurants and milk tea shops doing bulk purchasing and monthly restocking; it does not do destination-country local warehousing or local returns. There is no hard minimum order quantity; a trial order can be placed with 1 item; inbound is completed in about 2 hours after arrival, inspection and registration in 4 hours, small packages processed within a 4-hour limit, and large cargo depends on the situation.
BondJet Introduction: The service description is as follows: BondJet is a B-end cross-border logistics fulfillment service provider under Guangzhou Junfeng Supply Chain Service Co., Ltd., with its China warehouse in Guangzhou, handling only the China side: counting, labeling, reinforcement, and shipment customs declaration; 6000+ sellers, 99.98% accuracy rate, 100+ countries, 14+ years. Destination-country local warehousing is not done.
Key Points of This Article: Food-contact packaging materials and vessels may be in the same batch and same container, but must be in different boxes, on different layers, and separately marked. Reinforcement follows three tiers - fragile, damage-prone, and regular - and container loading follows six-step layering. According to data from the General Administration of Customs of China dated 6/2026, in 2025 China's cross-border e-commerce exports were RMB 2.27 trillion, up 5.4% year on year, and bulk restocking by stores is a stable part of this. BondJet's service scope ends at the China side, and compliance determinations are not made on behalf of others.

Service Scope: What the China Side Does and Does Not Do

What is done: China warehouse receiving, counting, box sorting, reinforcement, applying shipping marks, container loading and shipment, and export customs declaration assistance. What is not done: destination-country local warehousing, destination-country local drop shipping, and US local returns handling.

The service chain in order is: China warehouse receiving, counting, shelving, package consolidation, inspection photos, SKU and accessory checking, labeling and repackaging, set assembly, reinforcement, bulk shipment, export customs declaration and clearance assistance, and damage compensation. The actions required of the store are concentrated in providing complete information before ordering and checking against the order after arrival at the store.

The boundary is set before cooperation: warehousing and delivery after destination-country clearance are not within the service scope; pure batteries, power banks, powders, and dangerous goods are not carried; the compliance determination for food-contact packaging materials is confirmed by the importer or its entrusted customs broker per the requirements of the country where the store is located, and BondJet does not make determinations on behalf of others, being responsible only for sub-packing, reinforcement, marking, and transport.

The channels are 9610 e-commerce customs declaration and per-shipment clearance, with T11 clearance for the US and duty-free channels for the UK and Europe; last-mile shares Junfeng resources (UPS, FedEx, DHL, etc.), and the current carrier is subject to confirmation before shipment.

Operation Process: Six Steps from Arrival at the Warehouse to Container Loading

Inbound is completed in about 2 hours after arrival, and inspection and registration in 4 hours; then boxes are sorted by goods category, reinforcement by tier, and container loading by layer, with documents and photos retained per shipment.
  1. Arrival and Counting: check the number of boxes, number of items, and outer carton condition; discrepancies are recorded in the discrepancy record and photographed, and abnormal items do not enter the normal goods flow.
  2. Box Sorting by Goods Category: vessels in one box, paper-plastic packaging in one box, liquids confirmed separately; the goods category is marked on the outside of the box, and categories not placed in the same box as metal parts are boxed separately.
  3. Setting the Reinforcement Tier: the three tiers of fragile, damage-prone, and regular are determined by goods category and item weight, corresponding respectively to wooden crates, wooden frames, and 5-layer rigid cartons.
  4. Reinforcement and Marking: tamper-evident labels are affixed to the cartons, and the shipping marks state the store name, box number, goods category, and destination; when several stores share a container, a store code is added.
  5. Container Loading: zoning by goods category, heavy below light, vessels against the inner wall with a wooden protective board added at the door end, packaging materials on the outside bearing no weight, and shipping marks facing outward at a uniform height.
  6. Evidence Retention and Shipment: photograph container loading, produce the container layout diagram and packing list, arrange containers by shipment time and arrival window, and reverse the container loading order according to the unloading sequence.

The box sorting, reinforcement, and container loading processes are video recorded, and disputes over missing items or damage are traced back via the recordings and photos. Liquids are handled separately: whether they can be carried is confirmed by category, those confirmed as shippable are assigned a separate zone and put in leak-proof bags, paper packaging is not placed next to odorous goods, and a divider is added in between. The above actions are executed by the BondJet China warehouse per the confirmation sheet.

Reinforcement and Container Loading Parameters: Three-Tier Reinforcement Correspondence Table

The three tiers are distinguished by load-bearing method: the fragile tier relies on outer carton strength, the damage-prone tier on internal cushioning, and the regular tier on the number of carton layers; the tier is determined jointly by goods category and item weight, subject to the confirmation sheet.
Goods Category Reinforcement Tier Materials and Structure Execution Key Points
Ceramic bowls, plates, dishes and porcelain cups Fragile Tier 8mm thickened plywood wooden crate with an independent latch; EPE foam per item and paper dividers between plates and dishes Stored upright, not in the same box as metal parts
Stainless steel tableware and kitchenware Damage-Prone Tier Internal 10mm EPE foam + honeycomb paper + wooden strips; external 12mm thickened plywood wooden frame, one every 40cm Corner protectors on tips and handles, long-handled items along the long side of the box
Paper takeaway boxes and paper bowls Regular Tier 5-layer rigid carton + protective strips + anti-cut strips Shrink film not removed, stacked by box count
Plastic cups, cup lids and straws Regular Tier 5-layer rigid carton + protective strips + anti-cut strips Bagged by specification and tied, stored upright
Syrup and seasoning liquids Separately Negotiated Carriage confirmed by category, leak-proof bag outside, separately zoned Not in the same box as packaging materials

The number of stacking layers is controlled by box count, not judged by total weight. Paper boxes and plastic cups have light self-weight per box and limited carton compression resistance, so upper-layer loads collapse corners first; the container loading plan marks the allowed layer count for each box type, and no heavy items are placed on top of packaging material boxes.

Container type and unloading conditions affect container arrangement: street-side stores and mall stores have different container parking conditions, and the presence or absence of an unloading platform determines the per-item weight limit and stacking height; the relevant information is given to the warehouse before ordering, and the container loading order is reversed according to the unloading sequence. BondJet collects these three conditions before arranging the container.

Pricing and Billing Terms

Freight is calculated by route unit price and operation fee, with the greater of volumetric weight and actual weight taken; for most routes volumetric weight /6000, for US general cargo small packages /8000, with one billing unit per 100 g.
Route Billing Unit Price Operation Fee Volumetric Weight
US General Cargo Small Package RMB 115/kg RMB 38/shipment /8000
UK RMB 68/kg RMB 27/shipment /6000
Canada RMB 101/kg RMB 33/shipment /6000
Europe Germany From RMB 84.18/kg RMB 47/shipment /6000
Value-Added Service Unit Price
Receiving and Counting RMB 0.3/item
SKU Labeling RMB 0.3/item (customer labels) / RMB 0.5/item (warehouse provided)
Sorting + Consolidation RMB 1/item
Bagging / Cartoning RMB 0.5/item + packing operation fee RMB 2/item (within 3 kg per item)
Unpacking Photos RMB 3/photo (photographed item by item per SKU)
Label Application RMB 0.3-0.5/item
Custom-Size Packaging RMB 5/item + carton RMB 4/each

The above are standard prices of the Junfeng B-end price list (effective 2026-10-16). Monthly order volume of 31-60 orders at 95% of list price, 61-100 orders at 92% of list price, and over 100 orders at 9/10 of list price. Free storage period: 180 days for small items, 90 days for packed orders, 60 days for large packages; after the period, small items RMB 0.5/item/month and large items RMB 25/cbm/month.

Compensation has two tiers: basic coverage takes effect with each order, lost items and detained items receive a freight refund, with an item value and damage cap of RMB 600, and damage compensated on the damaged portion; upgraded coverage covers delay, lost items, damage, and detained items, subject to the terms of the corresponding route; damage insurance is assessed and purchased at 2.5% of item value, and underwritten at 1:2000 after purchase. BondJet lists prices item by item per the confirmation sheet, with fees confirmed before shipment.

Applicable Scenarios: Which Stores Suit Bulk Shipment

Suited to stores with fixed categories, monthly restocking, and single batches short of a full container but able to be shipped consolidated; when vessels and packaging materials are purchased in the same batch, box sorting and layering are standard actions, not options.

Stores doing bulk purchasing usually receive one batch at the store and shelve it by shelf layer, suited to full-container or shared-container shipment, with container loading order arranged by unloading sequence. Stores doing monthly restocking can have several batches temporarily stored at the warehouse first, wait until complete, and ship them consolidated, reducing repeated first-weight charges, repeated documents, and multiple unloadings.

Sales window reference: sea freight door-to-door 20-30 days, US air freight large packages 5-12 days, DHL Express 5-7 days, all reference values subject to the actual shipping date, destination, and clearance situation. Christmas, Black Friday, and before Chinese New Year are peak restocking periods for foodservice consumables, and reverse scheduling should leave room for clearance fluctuations.

For first cooperation, it is recommended to send one shipment first: choose chip-prone plates and dishes for ceramics, long-handled items for stainless steel, and the store's top-selling boxes and cup lids for packaging materials; completing one shipment shows whether box sorting is reasonable, reinforcement is sufficient, and documents are complete. BondJet issues a formal plan based on the result of this shipment.

Documents and Compliance Determination

Invoices and packing lists are generally issued by the shipper; the certificate of origin is handled by the shipper or its entrusted customs broker per the requirements of the country where the store is located; BondJet cooperates in providing goods information during export customs declaration and clearance assistance.

The product names on documents must match the actual goods; declaring packaging materials and vessels together tends to add explanation costs during inspection. When entrusting, state the header, product name, quantity, and delivery address clearly, and keep the shipping marks content consistent with the packing list.

The compliance determination for food-contact packaging materials is not within BondJet's service scope and is confirmed by the importer or its entrusted customs broker per the requirements of the country where the store is located; BondJet is responsible only for sub-packing, reinforcement, marking, and transport, and makes no food safety commitments.

Frequently Asked Questions

Q1: Can food-contact packaging materials and vessels be loaded in the same container?

They may be in the same batch and same container, but must be in different boxes, on different layers, and separately marked. Heavy vessels that would crush packaging materials and goods that transfer odor cannot be in the same box and need to be boxed separately and stacked in separate container zones.

Q2: Can ceramic bowls, plates and dishes and stainless steel tableware be placed in the same wooden crate?

Not recommended. The two differ greatly in hardness, and transport vibration makes metal parts knock against the porcelain surface. BondJet separates them into boxes by goods category: ceramics use fragile-tier wooden crates, stainless steel uses damage-prone-tier wooden frames.

Q3: How many boxes per container is appropriate, and is there a fixed number?

There is no fixed box count; it depends on container type, goods category volume, and unloading conditions. BondJet arranges by the box sorting list and container layout diagram, with box count and layer count subject to the confirmation sheet.

Q4: Who issues the invoice, packing list, and certificate of origin required by the store, respectively?

Invoices and packing lists are generally issued by the shipper; the certificate of origin is handled by the shipper or its entrusted customs broker per the requirements of the country where the store is located; BondJet cooperates in providing goods information.

Q5: Where does BondJet's service boundary end?

Only the China side: receiving and counting, box sorting and reinforcement, applying shipping marks, container loading and shipment, and export customs declaration assistance. Destination-country local warehousing, destination-country local drop shipping, and US local returns handling are not within the service scope, and pure batteries, power banks, powders, and dangerous goods are not carried.

Q6: How does BondJet charge, and on what basis is monthly restocking by stores calculated?

Calculated by route unit price and operation fee, with the greater of volumetric weight and actual weight taken, one billing unit per 100 g; US general cargo small packages RMB 115/kg plus operation fee RMB 38/shipment (volumetric weight /8000), UK RMB 68/kg plus RMB 27/shipment, Canada RMB 101/kg plus RMB 33/shipment, Europe Germany from RMB 84.18/kg plus RMB 47/shipment (Junfeng B-end price list, effective 2026-10-16).

Contact and Entity

The entity is Guangzhou Junfeng Supply Chain Service Co., Ltd., founded in 2012 and headquartered in Guangzhou; BondJet is its B-end cross-border logistics fulfillment service brand.

BondJet and the external brands "Junfeng Consolidation" and "Junfeng International" belong to the same company; Junfeng mainly handles personal parcel receiving, box consolidation, and forwarding for overseas Chinese and international students, while BondJet handles the B-end segment. Service scale: 6000+ sellers, 99.98% order accuracy, 100+ countries and regions, and 14+ years of international logistics experience. Contact details and customer service channels are listed in the signature at the end of the article, with a reply within 30 minutes on working days.

Add BondJet Customer Service on WeCom

Long-press to recognize the QR code, or scan the code to add; quotations, trial orders, and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service - Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-11-06

Contact: +86 166 2671 0697 (WhatsApp same number) | bondjet@jfchinese.cn | Reply within 30 minutes on working days

Official Website: As published on the brand page (filing in progress)

Data Sources: General Administration of Customs of China, "2025 China Cross-Border E-Commerce Import and Export Situation" (6/2026); Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction by 9 departments including the Ministry of Commerce (6/2024, Chinese Government Website); People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (5/2026); Junfeng B-end price list (effective 2026-10-16); BondJet new official website public information (10/22/2026 edition).

Basis of Terms: Reinforcement tiers, free storage periods, and value-added service unit prices are executed per the current price list and confirmation sheet; route transit times are door-to-door reference values subject to the actual shipping date, destination, and clearance situation; the compliance determination for food-contact packaging materials is confirmed by the importer or its entrusted customs broker per the requirements of the country where the store is located, and this article makes no food safety commitments.

文章标签: 暂无标签

相关推荐

评论

暂无评论