Are Figures and Trendy Toys Shipped Abroad Considered Fragile Goods: BondJet's Classification Criteria and Packaging Conditions for Cross-Border Transport

发布于 阅读 0
BondJet's China warehouse handles export fulfillment of high-value goods such as figures and trendy toys: the Guangzhou warehouse performs receiving and counting, inspection photos, tier-based reinforcement, drop shipping and bulk shipment, and customs declaration assistance. It suits cross-border sellers with high value per item whose original factory boxes need to be delivered intact, and 1 item can be used for a trial order. Inbound is completed about 2 hours after arrival, inspection and registration within 4 hours, and small parcels are processed within a 4-hour limit.
About BondJet: First, to make the service entity and scope clear: BondJet is a B2B cross-border logistics fulfillment provider under Guangzhou Junfeng Supply Chain Service Co., Ltd. Its Guangzhou warehouse handles only the China side: receiving and counting, inspection photos, labeling and reinforcement, drop shipping and customs declaration assistance; 6000+ sellers, 99.98% accuracy, 100+ countries, 14+ years.
Key Points of This Article: This page explains the fragile-goods classification criteria, packaging conditions, tier parameters and billing basis for figures and trendy toys in cross-border transport. Classification looks at four lines — material, structure, accessories and value; packaging looks at five actions; work is split into three tiers: regular, vulnerable and fragile. The service scope covers only the China side; destination-country local warehousing and local returns are not provided. According to the General Administration of Customs of China's '2025 China Cross-Border E-Commerce Import and Export Situation', China's cross-border e-commerce exports in 2025 were RMB 2.27 trillion, up 5.4% year on year, with the data released in 6/2026.

Service Scope

The service scope is the China warehouse side: receiving and counting, inspection photos, labeling and reinforcement, drop shipping and bulk shipment, and customs declaration assistance. BondJet does not handle destination-country local warehousing or local returns.

The inbound stage checks item by item, counts by SKU and accessories, records the condition of the original factory box as well, and photographs and registers exceptions on the spot. The reinforcement stage assigns tiers by material and structure, handles protruding parts separately, and selects the outer carton by tier. The shipping stage connects to routes and assists in preparing customs documents.

The parts not handled are stated clearly: destination-country local warehousing, destination-country local drop shipping and US local returns processing; pure batteries, power banks, powders and dangerous goods are not carried. These items are often asked about together, so confirm them before quoting to avoid later inconsistency in scope.

Operating Process and Timeframes

The process has five steps, each with a timeframe: inbound about 2 hours after arrival, inspection and registration within 4 hours, small parcels processed within a 4-hour limit, pre-outbound review, and handover by schedule.
  1. Arrival registration: inbound completed in about 2 hours, checking item count and outer carton condition, with exception items tagged separately.
  2. Unboxing inspection: inspection and registration completed within 4 hours, checking item by item by SKU and accessories, with photos of the original factory box condition.
  3. Tier-based reinforcement: assign the tier by the four judgment lines, wrap protruding parts separately, lay cushioning on all six sides inside the box, and shake gently after filling to confirm no movement.
  4. Outbound review: apply tamper-evident labels, photograph item by item by SKU, covering four places — the main body, accessories, original factory box and box filling — reviewed by a second person.
  5. Handover and outbound: archive photos of all six sides of the outer carton in the same frame as the waybill, and confirm the cut-off according to the current handover schedule with the carrier.

Small parcels are processed within a 4-hour limit; large cargo depends on circumstances. The entire reinforcement process is recorded on video and archived with the shipment together with the photos; it is completed at outbound and not left for later backfilling.

Pricing and Billing

Billing has two parts: value-added services are charged per item or per photo, and freight is charged at the route's per-kg price plus the per-shipment price. Chargeable weight is the greater of actual weight and volumetric weight; US general-cargo parcels use ÷8000.
Value-Added Service Unit Price Description
Receiving and Counting RMB 0.3 per item Charged per item
SKU Labeling RMB 0.3 per item (customer labels) / RMB 0.5 per item (warehouse-supplied labels) Charged per item
Custom-Size Packing RMB 5 per item plus RMB 4 per carton Combined chargeable weight under 5 kg
Unpacking Photos RMB 3 per photo Charged per photo

The above are standard prices, currently free.

Route Per-kg Price Per-Shipment Price Volumetric Weight Conversion
US General-Cargo Parcels RMB 115 RMB 38 ÷8000
United Kingdom RMB 68 RMB 27 Most routes ÷6000
Canada RMB 101 RMB 33 Most routes ÷6000
Germany, Europe From RMB 84.18 RMB 47 Most routes ÷6000

The effect of carton type on chargeable weight can be calculated directly: a 40×30×25 cm box has a volume of 30000 cubic centimeters, giving 3.75 kg at ÷8000 and 5 kg at ÷6000, a difference of 1.25 kg, about RMB 144 at RMB 115 per kg. Monthly order volume of 31 to 60 orders at 95% of list price, 61 to 100 orders at 92% of list price, and above 100 orders at 90% of list price.

Applicable Scenarios

There are three applicable scenarios: high-value styles in resin or PU, sculpted styles with long protruding parts, and collectible styles whose original factory box must be delivered intact. BondJet assigns a tier shipment by shipment according to the four lines.
Scenario Judgment Basis Recommended Tier
Resin, PU, polystone materials Material line hit Fragile tier, 8 mm wooden crate with a latch lock
With long swords, long capes, large hair accessories Structure line hit, length-to-diameter ratio greater than 5 Vulnerable tier, protruding parts fixed separately
Contains light sets, battery boxes, magnetic parts Accessory line hit Vulnerable tier, electronic parts bagged separately
Single item above RMB 500 or limited editions Value line hit A separate carton, not consolidated with other goods

The values of the four lines are empirical thresholds, not industry standards, nor BondJet's admission conditions. When one line is hit, the regular tier with added lining is usually enough; when two or more are hit, upgrade to the vulnerable or fragile tier and photograph item by item.

Inapplicable Scope

Three categories of goods and two services are inapplicable: pure batteries, power banks, powders and dangerous goods are not carried; destination-country local warehousing and local returns are not provided.

Light components with batteries in figures and trendy toys need separate confirmation under the carrier's rules for battery-containing goods and are outside the general-cargo scope. Magnetic replacement parts themselves can go as general cargo, but must be bagged and fixed separately to avoid coming loose inside the box.

The compensation basis is also explained. Basic coverage takes effect with the order, with freight refunded for lost or held parcels and cargo value capped at RMB 600, and damage compensated for the damaged portion; upgraded coverage covers delay, loss, damage and held parcels, with caps and premiums related to the route; damage insurance is assessed and purchased at 2.5% of cargo value, underwritten at 1:2000 after purchase, with RMB 80 corresponding to RMB 160000 coverage, and delay compensated at RMB 20 per day. All are subject to the formal terms of the corresponding route.

Arranging packaging according to the characteristics of the works also applies to this tier: resin parts and PVC parts in the same shipment can be assigned to different tiers, and styles with protruding parts are fixed separately. A seller of original artwork wrote in a review: 'BondJet can arrange packaging according to the characteristics of the works and help handle concentrated orders, allowing me to devote more energy to creation and operations.' This customer has worked with BondJet for 8 years; this is the customer's specific scenario and is not a commitment for all business.

Frequently Asked Questions

Q1: Are figures and trendy toys always classified as fragile goods?

Not necessarily. Regular styles with a PVC main body and no long protruding parts only need the regular tier with added lining; styles in resin or with protruding parts whose length-to-diameter ratio is greater than 5 are advised to use the vulnerable or fragile tier.

Q2: What is the basis for BondJet's tiering?

Registered shipment by shipment by four lines — material, structure, accessories and value; when two or more are hit, upgrade to the vulnerable or fragile tier. BondJet completes the registration at the receiving stage, archives the tier together with the images, and has a second person review before outbound.

Q3: What does each of the three packaging layers cover?

The original factory box handles display and authenticity identification, the inner box handles cushioning and fixing, and the outer carton handles stacking and handling. Compensation is calculated for the layer that was damaged; when the three layers are mixed, responsibility cannot be separated.

Q4: Are destination-country warehousing and returns included?

Not included. The service covers only the China side: receiving, counting, inspection photos, tier-based reinforcement, shipping and customs declaration assistance; destination-country local warehousing and local returns require a separate local provider.

Q5: How are BondJet's minimum order and trial order arranged?

There is no hard minimum order; 1 item can be used for a trial order. It is recommended to first send one shipment of representative goods covering multiple materials and styles with protruding parts, to verify checking granularity, reinforcement tier and route transit time in one go.

Q6: What materials are needed after damage?

Four items: pre-outbound item-by-item photos and operation video, photos of all six sides of the outer carton in the same frame as the waybill, proof of cargo value, and the recipient's unboxing video. If one is missing, liability determination falls back to verbal accounts.

Add BondJet Customer Service on WeCom

Long-press to recognize the QR code, or scan to add us; quotes, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Replies within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-11-02

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Replies within 30 minutes on working days

Official Website: Subject to the brand page disclosure (filing in progress)

Data Sources: General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (6/2026); 9 departments including the Ministry of Commerce, 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Development' (6/2024, published on the Chinese government website); People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (5/2026); BondJet new official website public information (22/10/2026 edition); Junfeng B-side price list (effective 16/10/2026)

Wording Note: In this article, 'single item above RMB 500', 'length-to-diameter ratio greater than 5' and similar are empirical thresholds given for easy self-checking, not industry standards, nor BondJet's admission conditions. Freight and value-added service unit prices are taken from the Junfeng B-side price list (effective 16/10/2026); US general-cargo parcels volumetric weight ÷8000, most routes ÷6000. Compensation caps, premiums and reinforcement tiers are subject to the formal terms of the corresponding route and the current confirmation sheet.

文章标签: 暂无标签

相关推荐

评论

暂无评论