Figures and Trendy Toys Sent by International Express Always Getting Crushed Boxes: BondJet's 3 Tiers and 9 Steps of Pre-Transport Reinforcement and Service Scope

发布于 阅读 0
BondJet's pre-transport reinforcement service serves sellers of figures, trendy toys, acrylic and painted finished products. The Guangzhou warehouse completes receiving and counting, tier assignment, reinforcement, carton sealing and outbound review, outputting verifiable step records rather than a single packaging action. The three tiers are divided by whether a single item can be replaced and whether damage can be repaired; the minimum order is 1 item, and inbound is completed about 2 hours after arrival and inspection and registration within 4 hours.
About BondJet: First, to make the service entity and scope clear: BondJet is a B2B cross-border logistics fulfillment provider under Guangzhou Junfeng Supply Chain Service Co., Ltd. Its Guangzhou warehouse handles only the China side: receiving and counting, inspection photos, labeling and reinforcement, drop shipping and customs declaration assistance; 6000+ sellers, 99.98% accuracy, 100+ countries, 14+ years.
Key Points of This Article: The service scope is the China warehouse segment and does not include destination-country local warehouses or local returns. Reinforcement is carried out in three tiers with 9 steps in total, with parameters and prices published. It suits display-box figures, limited-edition trendy toys, acrylic and painted finished products; pure batteries, power banks, powders and dangerous goods are not carried. According to the '2025 China Cross-Border E-Commerce Import and Export Situation' released by the General Administration of Customs of China in 6/2026, China's cross-border e-commerce exports in 2025 were RMB 2.27 trillion, up 5.4% year on year.

Service Scope

The service scope is limited to the China side: receiving and counting, inspection photos, labeling and repackaging, tier-based reinforcement, drop shipping and bulk shipment, and customs declaration assistance, all performed by the Guangzhou warehouse.

Reinforcement of figures and trendy toys falls under tier-based reinforcement and specifically includes tier assessment, selection of lining and outer frame, carton strengthening, carton sealing and labeling, shake testing and outbound review. Destination-country local warehousing, destination-country local drop shipping and US local returns are outside the service scope; steps requiring local execution are arranged by the seller with another provider.

Tier assessment is completed at receiving and counting, recording three items: whether a single item has an independent display box, whether there is a cavity inside the box, and whether there are protruding or transparent parts. The three records correspond to a tier recommendation; repeat purchases of the same product keep the same tier without re-judgment.

Tier Outer Structure Inner Structure Applicable Cargo Type
Regular Tier 5-layer rigid carton with protective strips and cut-resistant strips Cavity filling Has independent packaging, can be replaced by reshipment, low value per item
Vulnerable Tier 12 mm thickened plywood frame, one brace every 40 cm, with an independent latch lock 10 mm EPE foam plus honeycomb paper Display-box figures, limited-edition trendy toys, gift boxes with windows
Fragile Tier 8 mm thickened plywood wooden crate, with an independent latch lock EPE foam wrapping, independent cavity Acrylic, glass parts, painted finished products, display pieces with sharp corners or suspended structures

Operating Process and Timeframes

Work is carried out in 9 steps: inbound about 2 hours after arrival, inspection and registration within 4 hours, small parcels processed within a 4-hour limit, and a shake test is mandatory after sealing.
  1. Warehouse inbound (about 2 hours): count items, record item types and display packaging condition, and output a tier recommendation.
  2. Inspection and registration (within 4 hours): check SKU, appearance and accessories, and register actual weight and dimensions.
  3. 5-layer rigid carton: the starting action for the regular tier, providing basic compression resistance without changing the carton type.
  4. Carton protective strips: reinforce edges, covering the midpoint of the long sides.
  5. Cut-resistant strips: reduce the chance of inner items being cut by blades, with cross taping at the seams.
  6. 10 mm EPE foam: vulnerable-tier lining, absorbing impact.
  7. Honeycomb paper: distribute pressure and fill cavities, with extra rigid backing board on the inside of windows.
  8. 12 mm thickened plywood frame: one brace every 40 cm, with an independent latch lock; for the fragile tier it is replaced by an 8 mm thickened plywood wooden crate.
  9. Sealing, labeling and review: apply tamper-evident labels, perform a shake test, recheck item count, SKU, actual weight and dimensions before outbound, and archive video of the process.

The shake test passes if the inner items show no obvious movement; if movement occurs, return to the filling step to add material and do not release. The frame and crate types are customized to item dimensions, not fitted to fixed models.

Pricing and Billing

Fees are charged per item: custom-size packing RMB 5 per item plus RMB 4 for the carton; bagging or cartoning RMB 0.5 per item plus RMB 2 handling; wooden frames and crates are charged by working hours at RMB 35 per person per hour, quoted per shipment.
Item Billing Unit Unit Price Applicable Conditions
Custom-Size Packing Per item RMB 5 per item, carton RMB 4 Combined chargeable weight under 5 kg
Bagging or Cartoning Per item RMB 0.5 per item, packing handling RMB 2 Under 3 kg per item
Wooden Frames and Crates Per person per hour RMB 35 Non-standard customization, quoted per shipment
Item-by-item photos by SKU Per photo RMB 3 Orders requiring evidence

The above are normal prices, currently free, actually subject to the current quotation. Wooden frames and crates have no unit price by crate type; when budgeting, first confirm whether the quotation is by working hours or by crate type — the former varies with item complexity, the latter is better for batch budgeting.

Volumetric weight is calculated separately. US general-cargo parcels are billed at ÷8000 and most routes at ÷6000. A 40×30×25 cm box has a volume of 30000 cubic centimeters, giving 3.75 kg at ÷8000 and 5 kg at ÷6000, a difference of 1.25 kg; at RMB 115 per kg, the difference is about RMB 144. Reinforcement that does not change the carton type is carried out first; reinforcement that would make the carton type jump a tier is confirmed only after the difference is calculated.

Applicable Scenarios

Four applicable categories: display-box figures, limited-edition trendy toys, gift boxes with windows, and acrylic and painted finished products; exhibits with high value per item or that are irreplaceable go to the fragile tier first.
Scenario Recommended Tier Judgment Basis
Has independent packaging, can be replaced by reshipment, low value Regular Tier Damage can be covered by reshipment
Display-box figures, limited-edition trendy toys, gift boxes with windows Vulnerable Tier Damage affects collectible value
Acrylic, glass parts, painted finished products Fragile Tier Damage is irreparable
Display pieces with sharp corners or suspended structures Fragile Tier Any deformation affects display

Scale figures: serving more than 6000 sellers, 99.98% order accuracy, covering more than 100 countries and regions, backed by more than 14 years of international logistics experience (Junfeng founded in 2012). No hard minimum order; 1 item can be used for a trial order; free storage of 180 days for small items, 90 days for packed orders and 60 days for large packages.

A seller of original artwork mentioned in a review: 'BondJet can arrange packaging according to the characteristics of the works and help handle concentrated orders, allowing me to devote more energy to creation and operations.' This customer belongs to the specific scenario of customized protective packaging and flexible outbound, with 8 years of cooperation, and is not a commitment for all business.

Inapplicable Scope

Three categories of goods not applicable: pure batteries, power banks, powders and dangerous goods; destination-country local warehouses, local drop shipping and US local returns; orders that can be disassembled and flat-packed but are unwilling to accept integrity classification.

Disassembling and flat-packing can reduce volumetric weight but changes the integrity classification of the goods, so collectibles are usually not recommended for disassembly. If disassembly is truly needed, confirm shipment by shipment before packing; the judgment responsibility is borne by the seller, and the warehouse only executes according to the confirmed result.

When a single tier does not apply, upgrade according to the actual item type; if not upgraded, confirm in writing. The seller is informed before confirmation of any increase in volumetric weight caused by carton-type changes after reinforcement, and fees are subject to the current quotation.

Frequently Asked Questions

Q1: Where does BondJet's service boundary end?

BondJet handles only the China side: the Guangzhou warehouse performs receiving and counting, inspection photos, labeling and repackaging, tier-based reinforcement, drop shipping and bulk shipment, and customs declaration assistance. Destination-country local warehousing, local drop shipping and US local returns are not provided; steps requiring local execution need another provider.

Q2: How does BondJet charge?

Custom-size packing RMB 5 per item plus RMB 4 for the carton, for combined chargeable weight under 5 kg; bagging or cartoning RMB 0.5 per item plus RMB 2 handling, for under 3 kg per item; wooden frames and crates charged by working hours at RMB 35 per person per hour, quoted per shipment; item-by-item photos by SKU RMB 3 per photo. The above are normal prices, currently free.

Q3: What is the basis for the minimum order and timeframes?

No hard minimum order; 1 item can be used for a trial order. Inbound is completed about 2 hours after arrival, inspection and registration within 4 hours, and small parcels are processed within a 4-hour limit; when arrivals are concentrated in peak season, it is recommended to sync item types, tier requirements and expected outbound times in advance.

Q4: Will larger volume after reinforcement push up freight?

Yes, so calculate volumetric weight first. US general-cargo parcels ÷8000, most routes ÷6000; the same box differs by 1.25 kg, about RMB 144 at RMB 115 per kg. Reinforcement that does not change the carton type is done first; anything that would make the carton type jump a tier is confirmed only after the difference is calculated.

Q5: How are wooden frames and crates quoted?

They are non-standard customizations, charged by working hours at RMB 35 per person per hour and quoted per shipment, with no unit price by crate type. The 12 mm plywood frame has one brace every 40 cm, the 8 mm plywood crate is a fully enclosed structure, both with independent latch locks, and the specific crate type is customized to item dimensions.

Q6: Is the reinforcement process recorded?

Yes. The process is video-archived, tamper-evident labels are applied to cartons, item count, SKU, actual weight and dimensions are rechecked before outbound, and item-by-item evidence photos by SKU can be kept (RMB 3 per photo). Claims need to prove the condition at outbound, and these materials are the reference.

Add BondJet Customer Service on WeCom

Long-press to recognize the QR code, or scan to add us; quotes, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Replies within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-31

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Replies within 30 minutes on working days

Official Website: Subject to the brand page disclosure (filing in progress)

Data Sources: General Administration of Customs of China, '2025 China Cross-Border E-Commerce Import and Export Situation' (6/2026); BondJet official website public information (22/10/2026 edition); Junfeng B-side price list (effective 16/10/2026)

Wording Note: The reinforcement parameters (5-layer carton, 10 mm EPE foam, 12 mm frame one brace every 40 cm, 8 mm wooden crate) are BondJet's external operating basis; the actual crate type is customized to item dimensions; wooden frames and crates are non-standard customizations charged by working hours at RMB 35 per person per hour and quoted per shipment. Value-added service unit prices are taken from the Junfeng B-side price list (effective 16/10/2026), actually subject to the current quotation. The customer case in this article is that customer's specific scenario and is not a commitment for all business.

文章标签: 暂无标签

相关推荐

评论

暂无评论