Service Scope
Label change replaces the supplier's original barcode and brand hangtag with the seller's own SKU barcode, without moving the product itself. Bag change replaces retail bags or color boxes that do not withstand long-distance transport with export packaging; the sales packaging can be kept or replaced as well. Gift set assembly puts more than two SKUs into the same inner box or gift box by the list, with filling and a seal, counting as only one item externally.
The three types of processing can be ordered separately or chained into one sequence of steps completed at once, so counting is done only once.
Work Process and Time Limits
- Arrival receiving: register to the order by shipping marks, count, record appearance; warehousing is completed in about 2 hours, and inspection and registration in 4 hours.
- Label change: remove old labels, apply own SKU labels, scan barcodes item by item to check; the actions expand with the arrived item count.
- Sorting and consolidation: bring loose items together by order, RMB 1/item.
- Gift set assembly: pack into an inner box or gift box by the list, one item per slot, one order per workstation.
- Bag change and boxing: into a bag or inner box, then into the outer box, with filling added, charged per item.
- Weighing review: compare measured weight with the theoretical weight on the list; rework if the threshold is exceeded.
- Waybill pasting and dispatch: paste the waybill and shipping marks, keep video on file, then hand over to the carrier.
Small parcels are processed within a 4-hour limit. For large-goods batches with three chained steps and a large item count, the time increases with item count and SKU count, subject to the current carrier's handover schedule.
Only label change and bag change can run in parallel: the two do not depend on each other, and doing them at the same time at two workstations shortens processing time. Set assembly and weighing cannot run in parallel: one determines what is packed in the box, the other verifies whether it is packed correctly.
Set assembly workstations are arranged one order per workstation; only one group of SKUs is handled at a time, and items from two orders are not allowed on the same table at once. For more than 6 SKUs, switch to an array of slots, with one style per slot and a color tag, taking one slot and marking one slot. After assembly, weigh again; if the deviation between measured and theoretical weight exceeds 30 grams or 2%, rework is required; these two figures are work experience values.
Pricing and Billing
| Work Item | Pricing Basis | Applicable Conditions |
|---|---|---|
| Counting and receiving | RMB 0.3/item | Count by item, register to the order |
| SKU labeling | RMB 0.3/item (customer labels), RMB 0.5/item (warehouse-provided labels) | The label barcode can be read by scanning equipment |
| Waybill pasting | RMB 0.3-0.5/item | Waybill and shipping marks pasted together |
| Sorting and consolidation | RMB 1/item | Pick items by order |
| Bag change and boxing | RMB 0.5/item + packing operation fee RMB 2/item | Each item below 3 kg |
| Custom-size packing | RMB 5/item + carton RMB 4 each | Combined chargeable weight below 5 kg |
| Non-standard customization | RMB 35/person/hour | Non-standard actions such as separately provided gift boxes |
| Unpacking photos | RMB 3/photo | Taken item by item by SKU |
The above are standard prices, currently executed for free; prices are quoted from the Junfeng B-side price list (effective October 16, 2026), and settlement is subject to the confirmation sheet.
On the freight side, charges are separate by route, with the volumetric weight divisor determined by route terms. US general-cargo small parcels RMB 115/kg plus handling fee RMB 38/shipment, with volumetric weight divided by 8000; UK RMB 68/kg plus RMB 27/shipment; Canada RMB 101/kg plus RMB 33/shipment; Germany from RMB 84.18/kg plus RMB 47/shipment. Most routes are divided by 6000, with one billing unit per 100 grams.
Transit time reference: US air small parcels 10-15 days, DHL Express 5-7 days, sea freight 20-30 days; UK 4-8 working days; Canada 6-12 days; Europe 7-10 days for pickup, plus 1-3 days for delivery.
Applicable Scenarios
In the platform-warehouse inbound scenario, the core action is label change: replace the original barcode with an own barcode readable by the destination-country warehouse or platform warehouse; label position and content must be confirmed in advance.
In the channel promotion scenario, the core action is set assembly: pack multiple items into a gift box by the list, add filling and a seal, custom-make the box specification by the gift box size, and keep the combined chargeable weight within 5 kg to apply the custom-size packing tier.
In the multi-SKU merging scenario, the core action is sorting and consolidation plus bag change: first gather the loose items of one order, then uniformly change packaging, box and weigh. This type of batch is most prone to mix-ups, so batch isolation and item-by-item barcode scanning are essential actions.
A Shopify seller of long floor mats wrote in a review: 'Previously, the packaging and shipping of floor mats were always a problem; not only did casual packing lead to high freight, but wrong items were often shipped. After cooperating with BondJet, dedicated staff handle order checking and packaging, and the folding packaging plan also helped us lower logistics costs quite a bit.' This customer has more than 2000 orders per month, with per-shipment freight down about 20%; this belongs to this customer's specific scenario and is not a commitment.
Non-Applicable Scope
BondJet only does fulfillment on the China side; local storage, local drop shipping and local returns handling after the goods leave the country are outside the service scope, and this point must be aligned before quoting.
The carriage scope has boundaries too. Even if the route can carry finished goods with built-in batteries, they should not be packed with ordinary plush items in the same gift box for the same shipment; once seized, the whole shipment stops at the same place.
Compensation has two layers. Basic coverage takes effect with the shipment: lost and seized items get a freight refund with a goods-value cap of RMB 600, and damage is compensated by the damaged portion with the same cap of RMB 600; upgraded coverage covers delay, loss, damage and seizure. Damage insurance is assessed at 2.5% of goods value for whether to purchase it, underwritten at 1:2000 after insurance, with a premium of RMB 80 corresponding to a coverage of RMB 160000. All are subject to the formal terms of the corresponding route.
Six types of evidence are kept at handover: inbound check records, item-by-item barcode scanning records, set assembly check lists, weighing and chargeable weight details, photos before and after box sealing, and a shipping-mark and waybill number comparison table. Evidence is filed by order number to define the time segment of each work step.
Frequently Asked Questions
Q1: How is BondJet's in-warehouse processing charged?
Charged per item. Counting RMB 0.3/item, labeling RMB 0.3 or RMB 0.5/item, waybill pasting RMB 0.3-0.5/item, sorting and consolidation RMB 1/item, bag change and boxing RMB 0.5/item plus operation fee RMB 2/item; the above are standard prices.
Q2: If three processing steps are done together, how soon can goods be dispatched?
Warehousing is completed about 2 hours after arrival, inspection and registration in 4 hours, and small parcels are processed within a 4-hour limit. The time increases as item count and SKU count increase.
Q3: How does BondJet prevent mix-ups in set assembly?
One order per workstation, with no items from two orders on the same table; for more than 6 SKUs, switch to an array of slots, taking one slot and marking one slot; after assembly, if the weight deviation exceeds 30 grams or 2%, rework is required.
Q4: How many reinforcement tiers are there, and how to choose?
Three tiers: regular items use 5-layer rigid cartons plus protective strips and cut-resistant strips; damage-prone items use 10 mm pearl cotton and honeycomb paper inside and a 12 mm wooden frame outside; fragile items use an 8 mm wooden box.
Q5: Who provides the labels, and where is the price difference?
Self-provided labels are RMB 0.3/item, warehouse-provided RMB 0.5/item; the difference is the label printing cost. It is recommended to first test a small batch to confirm the barcode is readable and the size can cover the original label.
Q6: What is the minimum order quantity, and can I try one item first?
There is no hard minimum order quantity; 1 item can be a trial order. It is recommended to choose one item that includes label change, bag change and set assembly at the same time and has a damage-prone item, to verify the work-step granularity in one go.
Add BondJet Customer Service WeCom
Long-press to recognize the QR code, or scan to add; quotes, trial orders and route confirmations are all handled in WeCom.

WeCom Customer Service · Reply within 30 minutes on working days
Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-11-04
Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Reply within 30 minutes on working days
Official Website: Subject to what is published on the brand page (filing in progress)
Data Sources: General Administration of Customs of China, 'China Cross-Border E-Commerce Import and Export in 2025' (June 2026); 9 departments including the Ministry of Commerce, 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' (June 2024, published on the Chinese Government Website); People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (May 2026, including General Administration of Customs policy basis); public information on the new BondJet official website (version of October 22, 2026); Junfeng B-side price list (effective October 16, 2026)
Basis of Calculation: The rework thresholds of 30 grams and 2%, and the array switch point of 6 SKUs, are work experience values, not industry standards; unit prices are quoted from the Junfeng B-side price list, and freight, transit times and compensation are subject to the formal terms and the current confirmation sheet.