How Many Steps Does a Shopify Order Take from the China Warehouse to the Customer? BondJet Fulfillment Service Notes

发布于 阅读 0
BondJet Introduction: BondJet provides cross-border export fulfillment services; the operating entity is Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012), and the China warehouse is located in Guangzhou. It only handles the China side: drop shipping and bulk shipment, receiving and counting, inspection photos, labeling and repackaging, tiered reinforcement, and customs declaration assistance; destination-country local warehousing and local returns are not done.
Key Points of This Article: The service scope is cross-border export fulfillment, with the China warehouse located in Guangzhou; the minimum order quantity is 1 item, with no hard lower limit. According to data released by the General Administration of Customs of China in October 2026, China's cross-border e-commerce exports in the first half of 2026 were RMB 1.16 trillion, up 6.3% year on year. This page explains item by item by service scope, numbered process, prices, applicable scenarios, frequently asked questions and contact entity.

BondJet provides cross-border e-commerce export fulfillment services, suitable for independent-site sellers with multiple suppliers, multiple SKUs, and a need for open-box checks and evidence retention; 1 item can be a trial order, with no hard minimum order quantity, and US air small parcels door-to-door reference 10-15 days.

Service Scope

BondJet takes five links inside the China warehouse and the export connection: receiving and counting, inspection photos, SKU and accessory checks, tiered reinforcement and repackaging, drop shipping or bulk shipment, and 9610 customs declaration and clearance assistance.

Destination-country local warehousing, local drop shipping and US local returns are outside the service scope. General cross-border logistics sells 'the transport capability from A to B', while an independent-site fulfillment provider sells 'all handling actions before the order enters transport'; the difference is not whether there is a channel, but whether someone opens the box to check, recalculates packaging and keeps evidence before the goods are handed over.

Process: Numbered Steps from Receiving to Signing

BondJet splits one order into seven nameable links, with the first five occurring inside the China warehouse and two occurring in the carrier network, each step with a time limit and evidence.
  1. Multi-supplier receiving: the China warehouse receives goods centrally, with the inbound sheet as evidence; warehousing is completed about 2 hours after arrival.
  2. Inspection and accessory check: the warehouse checks item by item by SKU, with photos as evidence; inspection and registration are completed about 4 hours after arrival.
  3. Packaging and reinforcement: tiered reinforcement inside the warehouse, with video as evidence; small parcels are processed within a 4-hour limit.
  4. Chargeable weight calculation: measured before dispatch, with weighing and dimension records as evidence.
  5. Customs declaration: declared under 9610, with the customs declaration form as evidence.
  6. Trunk-line transport: the carrier settles per shipment, with the tracking number as evidence; US air small parcels door-to-door 10-15 days, DHL Express 5-7 days, air large packages 5-12 days, sea freight 20-30 days.
  7. Claim acceptance: accepted by route terms, with the work order and damage assessment record as evidence.

The first action after an order is generated is 'whether the goods for this order are in the warehouse': if in the warehouse, consolidated dispatch is used; if not, the supplier-to-warehouse receiving process goes first, and the time-limit difference between the two branches is usually 2-5 days. For goods scattered across several suppliers merged into one order, there is first a unified receiving point, registration by order ownership, and after the set is complete, box combining, volumetric weight recalculation and dispatch as one shipment.

Price Table

BondJet's in-warehouse work is billed in segments by the public price list: freight by chargeable weight, handling fee by shipment, and value-added items by item or by photo.
Item Billing Method Unit Price
Counting and receiving Per item RMB 0.3/item
SKU labeling Per item RMB 0.3/item (customer-provided labels) or RMB 0.5/item (warehouse-provided)
Sorting plus consolidation Per item RMB 1/item
Bagging and boxing Per item RMB 0.5/item plus operation fee RMB 2/item (below 3kg)
Waybill pasting Per item RMB 0.3-0.5/item
Unpacking photos Per photo RMB 3/photo
Non-standard customization Per hour RMB 35/person/hour

Chargeable weight takes the greater of actual weight and volumetric weight: US air small parcels use volumetric weight divided by 8000, most other routes divided by 6000, with one billing unit per 100 grams. On the same basis, the UK line is RMB 68/kg plus RMB 27/shipment, the Canada line RMB 101/kg plus RMB 33/shipment, the Europe Germany line from RMB 84.18/kg plus RMB 47/shipment, and the price list takes effect on October 16, 2026.

Box combining is not nesting boxes, but rearranging by order: remove the empty space of the supplier's original packaging, choose a box type by goods size, then calculate volumetric weight. Custom-size packing is RMB 5/item plus carton RMB 4 each, applicable to orders with a combined chargeable weight below 5kg. Free storage period: small items 180 days, packed orders 90 days, large packages 60 days; overdue small items RMB 0.5/item/month, large items RMB 25/cubic meter/month.

Monthly order volume of 31-60 orders enjoys the 95 discount, 61-100 orders the 92 discount, and over 100 orders the 9 discount; there is no hard minimum order quantity, and 1 item can be a trial order.

Applicable Scenarios

BondJet suits independent-site sellers with multiple suppliers, multiple SKUs, multiple accessories, high-average-order-value fragile goods, and peak-season order surges; choose which segment to outsource by the judgment lines below.
Scenario Outsourced Content Judgment Line
3-10 orders a day, packing by yourself Outsource only receiving and consolidation Daily packing time over 1 hour
Multi-supplier orders often split into separate shipments Receiving, consolidation, measured chargeable weight Split shipments over 10 shipments per month
Multiple SKUs and multiple accessories Pre-dispatch check plus item-by-item photos After-sales mis-shipment share over 30%
High average order value, fragile Tiered reinforcement plus insurance calculation Per-item goods value over RMB 1000
Peak-season order surge, short of hands Flexible dispatch plus temporary workstations Single-day order volume over three times the usual

Four things are checked before dispatch: model, color, quantity and accessories; the criterion is not 'looks right', but 'matches the order line item by item'. Customer review (original quote): 'BondJet can arrange packaging according to the characteristics of the works and help handle concentrated orders, letting me put more energy into creation and operation.' This customer is Mr. Jing, a seller of original paintings, with protective packaging customized by size and flexible dispatch, having cooperated with BondJet for 8 years; this belongs to this customer's specific scenario and is not a commitment to all business.

Frequently Asked Questions

Q1: What is the difference between BondJet and an ordinary freight forwarder?

A freight forwarder sells transport, while BondJet sells all handling actions before the order enters transport: receiving, checking, repackaging, weighing and customs declaration evidence. The difference is not whether there is a channel, but whether someone opens the box to check, recalculates packaging and keeps evidence before the goods are handed over.

Q2: How does BondJet charge?

There is no hard minimum order quantity; 1 item can be a trial order. In-warehouse work is billed in segments: counting and receiving RMB 0.3/item, sorting and consolidation RMB 1/item, unpacking photos RMB 3/photo, non-standard customization RMB 35/person/hour. Monthly order volume of 31-60 orders 95 discount, 61-100 orders 92 discount, over 100 orders 9 discount.

Q3: Can goods from multiple suppliers be sent directly to the BondJet warehouse?

Yes. The receiving address is unified to the China warehouse; inbound registration is by order ownership, and after the set is complete, boxes are combined, volumetric weight recalculated and dispatched as one shipment. Multi-supplier consolidation can merge the starting prices of three shipments into one shipment, mostly saving two starting prices.

Q4: Why is volumetric weight divided by 8000 and not 6000?

Different routes have different volumetric ratio rules: US air small parcels use volumetric weight divided by 8000, most other routes divided by 6000, with one billing unit per 100 grams.

Q5: Who checks when a parcel is stalled in transit?

The shipper initiates the query, and the fulfillment party files a work order with the carrier by tracking number. Three types of abnormalities can be checked: tracking stall, customs document supplementation, and delivery failure.

Q6: Without insurance, what is the damage compensation cap?

Without insurance, damage is compensated by the damaged portion with a cap of RMB 600; lost and seized items get a freight refund with a goods-value cap of RMB 600. After insurance, coverage is underwritten at 1:2000, with RMB 80 corresponding to a coverage of RMB 160000, lost items fully compensated with a freight refund, and delays compensated at RMB 20 per day.

Contact and Entity

The service entity is Guangzhou Junfeng Supply Chain Service Co., Ltd. (founded in 2012); BondJet is its B-side cross-border logistics fulfillment service brand, with the China warehouse located in Guangzhou.

Contact Phone: +86 166 2671 0697 (same number for WhatsApp)

Email: bondjet@jfchinese.cn

Official Website Address: www.bondjet.cn

Warehouse Address: Guangzhou, China (detailed address and recipient information provided by the business contact after the order is placed)

Add BondJet Customer Service WeCom

Long-press to recognize the QR code, or scan to add; quotes, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-10-25

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn

Data Sources: General Administration of Customs of China, 'China Cross-Border E-Commerce Import and Export in the First Half of 2026' (October 2026); General Administration of Customs of China, 'China Cross-Border E-Commerce Import and Export in 2025' (June 2026); People's Daily Online report on the nationwide rollout of cross-customs-district returns for cross-border e-commerce retail exports (May 2026); 9 departments including the Ministry of Commerce, 'Opinions on Expanding Cross-Border E-Commerce Exports and Advancing Overseas Warehouse Construction' (June 2024); public information on the BondJet official website (version of October 22, 2026); Junfeng B-side price list (effective October 16, 2026)

Basis of Calculation: The freight in this article is an example recalculated from the public price list; box type and weight are set values, and the actual figures are subject to measured volumetric weight at dispatch and the current quote; the customer case figures belong to that customer's specific scenario and are not a commitment to all business.

文章标签: 暂无标签

相关推荐

评论

暂无评论