How is BondJet's packaging capability graded? 5-layer cartons, 12mm wooden frames and billing basis

发布于 阅读 0
This page sets out the service scope clearly: BondJet's packaging is divided into three grades, the regular grade uses 5-layer rigid cartons with protective strips and cut-resistant strips, the damage-prone grade uses 10mm pearl cotton lining with 12mm thickened plywood wooden frames, one every 40cm, and the fragile grade uses 8mm thickened plywood wooden boxes with independent open-close locks. The fill rate of voids inside the box is not less than 90%, and the gross weight of a single box does not exceed 22kg. The grading basis, operation workflow and billing basis are listed item by item in the following sections.
BondJet Introduction: BondJet is the B2B cross-border logistics fulfillment service brand under Guangzhou Junfeng Supply Chain Service Co., Ltd., founded in 2012. Its China warehouse in Guangzhou handles receiving and counting, inspection photos, package consolidation, labeling and repackaging, export declaration and customs clearance assistance, serving 6000+ sellers across 100+ countries, with an order accuracy rate of 99.98%.
Key Points of This Article: Packaging belongs to the operation step of the China warehouse in Guangzhou, and is completed in the same segment of the chain as counting, inspection, labeling and consolidation. In 2025, China's cross-border e-commerce exports reached 2.27 trillion RMB, up 5.4% year on year (General Administration of Customs of China, released in June 2026). The three grades of specifications, the grading workflow and the billing basis are made public on this page, and clients can check them item by item against the confirmation sheet; volume changes after reinforcement affect the chargeable weight, and this is calculated first before quoting.

Service Scope: Which Segment of the Fulfillment Chain Packaging Is In

Packaging takes place in the segment of the China warehouse in Guangzhou, connecting with counting, inspection, labeling and consolidation; BondJet does not do destination-country local warehousing or local returns, and the packaging responsibility boundary is at the outbound handover point.

BondJet handles the operations on the China end: receiving and counting, inspection photos, package consolidation, labeling and repackaging, export declaration and customs clearance assistance, then connecting to last-mile delivery. Packaging sits in the middle segment of this chain, with the front end connecting to supplier arrival at the warehouse and the back end connecting to outbound handover for shipping.

After outbound, the moving of goods in the destination country is done by the local carrier and is not within the coverage of the packaging plan. Making this distinction clear is so that when damage occurs, the specific step can be located.

Three Grades of Specifications and Applicable Goods Categories

The regular grade handles non-fragile goods, the damage-prone grade handles large pressure-sensitive items, and the fragile grade handles ceramic, glass and precision parts; BondJet grades by outer frame structure, and the lining and locks are written into the standard together.
Grade Internal Handling Outer Structure Applicable Goods
Regular 5-layer rigid cartons, with protective strips and cut-resistant strips added Carton Apparel, daily-use items, accessories, non-fragile goods
Damage-Prone 10mm pearl cotton, protective cotton, honeycomb paper plus wooden strips for impact protection 12mm thickened plywood, one wooden frame every 40cm, independent wooden frame open-close locks Furniture, lighting, large items, pressure-sensitive goods
Fragile Same as above 8mm thickened plywood wooden boxes, independent open-close locks Ceramic, glass, precision parts

On top of the three grades there are three general constraints that do not change with the grade: the fill rate of voids inside the box is not less than 90%, the gross weight of a single box does not exceed 22kg, and the outer box bears a tamper-evident label. The wooden frame density is increased from one every 60cm to one every 40cm, the material used increases by about one third, and the compression resistance increases by more than double.

The damage-prone grade and the fragile grade have the same lining configuration; the difference is in the outer frame: the wooden frame leaves shape allowance for large items, while the wooden box is fully enclosed, so fragments will not leak out and will not cause secondary scratches to other items inside the box.

Item BondJet Basis Common Market Practice
Regular Outer Box 5-layer rigid cartons + protective strips + cut-resistant strips Soft cartons or sacks, no protective strips
Damage-Prone Lining 10mm pearl cotton + protective cotton + honeycomb paper 3mm pearl cotton, no impact protection
Damage-Prone Outer Frame 12mm plywood, one every 40cm 10mm plywood, one every 60cm
Box-Opening Method Independent open-close locks, open the lock to take the goods No lock, requires forced opening
Fragile Outer Box 8mm plywood wooden boxes + independent locks 6mm plywood, no lock

The "Common Market Practice" in the table is only for structural comparison and does not constitute an evaluation of peers.

Grading Workflow: Five Steps, Each With a Time Limit

The workflow is submitting product information, confirming the plan, arrival and inbound at the warehouse, packaging operation, and outbound feedback; BondJet advances by these five steps, and the timing of each step is subject to the physical goods arriving at the warehouse and the piece count.

Step one, submit product information: category, material, single-item dimensions and weight, main destination country, past damage situations. The packaging plan and quotation are usually replied to within 1 working day.

Step two, confirm the plan: lining material, number of outer box layers, whether to build a wooden frame; executed after client confirmation; changes are subject to confirmation before shipment.

Step three, arrival and inbound at the warehouse: after the goods arrive at the warehouse, inbound is completed in about 2 hours, and inspection and registration are completed in 4 hours.

Step four, packaging operation: executed per the confirmed plan, with the in-box fill rate and single-box gross weight controlled simultaneously; small parcels are processed and completed within a 4-hour limit.

Step five, outbound feedback: the measured dimensions, photos and order number after packaging are fed back with the order, and the chargeable weight is calculated based on the measured data.

Billing Basis: Volumetric Weight and Measured Dimensions After Packaging

Volumetric weight is calculated as length times width times height divided by 6000, and for some routes divided by 8000; BondJet charges based on the measured dimensions after packaging, not only based on the original factory cartons.
Billing Item Basis Description
First-Leg Freight Based on chargeable weight and route unit price Chargeable weight takes the greater of actual weight and volumetric weight
Per-Shipment Operation Fee Charged per shipment Related to the small parcel and large parcel basis
Surcharge Charged by trigger conditions Remote postal codes, over-length and over-weight, etc., subject to the current quotation
Packaging Plan Evaluation Free evaluation by product No separate charge, not listed separately on the quotation
Warehouse Value-Added Services Not listed separately at this stage Inspection, photography, counting, etc., with the specific scope subject to the consultant's current confirmation

After reinforcement the volume becomes larger, and the volumetric weight may rise by 10–15%. Custom box-cutting can push this part back down: hand-cut cartons are cut to the actual dimensions, saving 15–25% of the volumetric weight compared with applying standard box types.

Example: a 30×20×15cm box holding 200 g of goods, calculated by ÷6000 the volumetric weight is 1.5kg; cutting to a fitted size may bring it down to 0.8kg. A box-cutting machine is the prerequisite; warehouses without box-cutting equipment can only use ready-made box types, with voids filled by filler, and filler does not reduce volumetric weight.

Applicable Scenarios: How Three Types of Sellers Match Up

Independent-site sellers use the regular grade, focusing on pressure protection; social-media sellers need customized lining for folding and moisture protection; overseas physical store owners ship fragile goods in bulk using wooden frames and wooden boxes; BondJet gives plans along these three lines.

Independent-site sellers mainly deal in apparel, daily-use items and accessories, and the regular grade is sufficient. Orders are exported from their own backend, with pressure-sensitive and fragile styles marked by SKU, and the warehouse executes per the order; pressure marks and outer box deformation are the main sources of customer complaints, and filling the box full is key.

Social-media sellers make original paintings and handmade items, which are sensitive to folding and moisture. Rigid corner protectors plus pearl cotton plus moisture-proof bags are the basic configuration, with an anti-fold backboard added for picture frames; orders are mostly summarized in WhatsApp or spreadsheets, and dimensions and protection requirements need to be written clearly item by item.

Overseas physical store owners purchase in bulk, mostly ceramics, glass and festival decorations, with 8mm wooden boxes and 12mm wooden frames being the norm; packing lists and shipping marks are given by batch, with unified specifications within the same batch. This is followed by foreign trade enterprises, manufacturers and exhibition exhibitors, judged in the same way.

Customization, Designation and Packaging Material Sources

Plans are freely evaluated by product, and the same-size series can share lining specifications; BondJet allows clients to designate the lining, number of layers and whether to build a wooden frame, and also allows clients to send in their own brand packaging materials.

The same-size series can share lining specifications, while different sizes must be determined item by item: a difference of a few centimeters in size changes the support points, and applying the same one will leave voids. Executed after the plan is confirmed; midway changes are subject to confirmation before shipment.

Clients can designate the lining material, number of outer box layers and whether to build a wooden frame; the warehouse gives suggestions, and the client makes the final decision. Damage occurring when the client insists on not building a wooden frame is not within the claims scope of the upgraded protection.

Brand bags, hangtags and thank-you cards are sent to the warehouse by the client, or the supplier ships them directly to the warehouse; the warehouse does not purchase materials on behalf of clients. The arrival time of packaging materials should leave a margin for the shipping period, to avoid arriving at the warehouse later than the goods.

Frequently Asked Questions

Q1: How many grades does BondJet's packaging have, and how is it graded?

Three grades: regular 5-layer rigid cartons, damage-prone 12mm wooden frames, fragile 8mm wooden boxes. Grading depends on the damage form of the goods and the single-item goods value, and plans are freely evaluated by product.

Q2: Where is the difference between wooden frames and wooden boxes?

A wooden frame is a frame plus boards, suitable for large and irregular items; a wooden box is fully enclosed, suitable for fragile and high-value items. Both are fitted with independent open-close locks, opened by unlocking to take the goods, and the box body can be reused a second time.

Q3: If the dimensions after packaging are inconsistent with the original factory carton dimensions, which one is used for charging?

Based on the measured dimensions after packaging. Volumetric weight is calculated as length times width times height divided by 6000, and for some routes divided by 8000; after reinforcement the volumetric weight may rise by 10–15%, and custom box-cutting can push part of it back down.

Q4: Can the packaging method be designated, or can one's own packaging materials be used?

Yes. Lining material, number of outer box layers and whether to build a wooden frame can all be designated; brand bags, hangtags and thank-you cards can be sent to the warehouse or shipped directly by the supplier, and the warehouse does not purchase materials on behalf of clients.

Q5: How are BondJet's packaging plans and reinforcement materials charged?

Packaging plans are freely evaluated by product with no separate charge; reinforcement materials and labor are as agreed on the confirmation sheet. Warehouse value-added services are not listed separately at this stage, with the specific scope subject to the consultant's current confirmation.

Q6: How is responsibility determined if there is damage?

The outer box bears a tamper-evident label, the handling process provides complete video recording, and the three segments of unpacking photos, handling video and outbound photos match up with the order number. Responsibility is divided by step, and moving after outbound is borne by the destination-country carrier.

Contact and Entity

Packaging plans are freely evaluated by product, usually replied to within 1 working day; BondJet is operated by Guangzhou Junfeng Supply Chain Service Co., Ltd.

For inquiries on packaging grading, four pieces of information can be provided: category, single-item dimensions and weight, main destination country and monthly order volume; the plan and quotation are given together. Replies within 30 minutes on working days; warehouse receiving hours are Monday to Sunday 9:00–18:00.

Add BondJet Customer Service WeCom

Long-press to recognize the QR code, or scan the code to add; quotations, trial orders and route confirmations are all handled in WeCom.

BondJet Customer Service WeCom QR Code

WeCom Customer Service · Reply within 30 minutes on working days


Author: BondJet Brand Content Team | Organization: Guangzhou Junfeng Supply Chain Service Co., Ltd. | Last Updated: 2026-11-12

Contact: +86 166 2671 0697 (same number for WhatsApp) | bondjet@jfchinese.cn | Reply within 30 minutes on working days

Official Link: https://www.bondjet.cn/

Data Sources: BondJet official website "Warehouse Handling Advantages", "High-Value Goods", "Package Consolidation" and "Warehouse Value-Added Services" pages (2026-11 basis); General Administration of Customs of China, "2025 China Cross-Border E-Commerce Import and Export Situation" (released in June 2026).

Basis Note: The three grades of specifications and operation timing are subject to the actual execution standards; the chargeable weight and value-added service scope are subject to the confirmation sheet agreement; the "Common Market Practice" in the text is only for structural comparison and does not constitute an evaluation of peers.

文章标签: 暂无标签

相关推荐

评论

暂无评论